Next: , Previous: , Up: (dir)   [Contents][Index]

GNU Automake

This file documents the GNU Automake package for creating GNU Standards-compliant Makefiles from template files. This edition documents version 1.4.

Table of Contents

Next: , Previous: , Up: GNU Automake   [Contents][Index]

1 Introduction

Automake is a tool for automatically generating Makefile.ins from files called Each is basically a series of make macro definitions (with rules being thrown in occasionally). The generated Makefile.ins are compliant with the GNU Makefile standards.

The GNU Makefile Standards Document (see Makefile Conventions in The GNU Coding Standards) is long, complicated, and subject to change. The goal of Automake is to remove the burden of Makefile maintenance from the back of the individual GNU maintainer (and put it on the back of the Automake maintainer).

The typical Automake input file is simply a series of macro definitions. Each such file is processed to create a There should generally be one per directory of a project.

Automake does constrain a project in certain ways; for instance it assumes that the project uses Autoconf (see Introduction in The Autoconf Manual), and enforces certain restrictions on the contents.

Automake requires perl in order to generate the Makefile.ins. However, the distributions created by Automake are fully GNU standards-compliant, and do not require perl in order to be built.

Mail suggestions and bug reports for Automake to

2 General ideas

The following sections cover a few basic ideas that will help you understand how Automake works.

Next: , Previous: , Up: General ideas   [Contents][Index]

2.1 General Operation

Automake works by reading a and generating a Certain macros and targets defined in the instruct Automake to generate more specialized code; for instance, a ‘bin_PROGRAMS’ macro definition will cause targets for compiling and linking programs to be generated.

The macro definitions and targets in the are copied verbatim into the generated file. This allows you to add arbitrary code into the generated For instance the Automake distribution includes a non-standard cvs-dist target, which the Automake maintainer uses to make distributions from his source control system.

Note that GNU make extensions are not recognized by Automake. Using such extensions in a will lead to errors or confusing behavior.

Automake tries to group comments with adjoining targets and macro definitions in an intelligent way.

A target defined in generally overrides any such target of a similar name that would be automatically generated by automake. Although this is a supported feature, it is generally best to avoid making use of it, as sometimes the generated rules are very particular.

Similarly, a macro defined in will override any definition of the macro that automake would ordinarily create. This feature is more often useful than the ability to override a target definition. Be warned that many of the macros generated by automake are considered to be for internal use only, and their names might change in future releases.

When examining a macro definition, Automake will recursively examine macros referenced in the definition. For example, if Automake is looking at the content of foo_SOURCES in this snippet

xs = a.c b.c
foo_SOURCES = c.c $(xs)

it would use the files a.c, b.c, and c.c as the contents of foo_SOURCES.

Automake also allows a form of comment which is not copied into the output; all lines beginning with ‘##’ are completely ignored by Automake.

It is customary to make the first line of read:

## Process this file with automake to produce

2.2 Depth

automake supports three kinds of directory hierarchy: ‘flat’, ‘shallow’, and ‘deep’.

A flat package is one in which all the files are in a single directory. The for such a package by definition lacks a SUBDIRS macro. An example of such a package is termutils.

A deep package is one in which all the source lies in subdirectories; the top level directory contains mainly configuration information. GNU cpio is a good example of such a package, as is GNU tar. The top level for a deep package will contain a SUBDIRS macro, but no other macros to define objects which are built.

A shallow package is one in which the primary source resides in the top-level directory, while various parts (typically libraries) reside in subdirectories. Automake is one such package (as is GNU make, which does not currently use automake).

2.3 Strictness

While Automake is intended to be used by maintainers of GNU packages, it does make some effort to accommodate those who wish to use it, but do not want to use all the GNU conventions.

To this end, Automake supports three levels of strictness—the strictness indicating how stringently Automake should check standards conformance.

The valid strictness levels are:


Automake will check for only those things which are absolutely required for proper operations. For instance, whereas GNU standards dictate the existence of a NEWS file, it will not be required in this mode. The name comes from the fact that Automake is intended to be used for GNU programs; these relaxed rules are not the standard mode of operation.


Automake will check—as much as possible—for compliance to the GNU standards for packages. This is the default.


Automake will check for compliance to the as-yet-unwritten Gnits standards. These are based on the GNU standards, but are even more detailed. Unless you are a Gnits standards contributor, it is recommended that you avoid this option until such time as the Gnits standard is actually published.

For more information on the precise implications of the strictness level, see The effect of --gnu and --gnits.

2.4 The Uniform Naming Scheme

Automake macros (from here on referred to as variables) generally follow a uniform naming scheme that makes it easy to decide how programs (and other derived objects) are built, and how they are installed. This scheme also supports configure time determination of what should be built.

At make time, certain variables are used to determine which objects are to be built. These variables are called primary variables. For instance, the primary variable PROGRAMS holds a list of programs which are to be compiled and linked.

A different set of variables is used to decide where the built objects should be installed. These variables are named after the primary variables, but have a prefix indicating which standard directory should be used as the installation directory. The standard directory names are given in the GNU standards (see Directory Variables in The GNU Coding Standards). Automake extends this list with pkglibdir, pkgincludedir, and pkgdatadir; these are the same as the non-‘pkg’ versions, but with ‘@PACKAGE@’ appended. For instance, pkglibdir is defined as $(datadir)/@PACKAGE@.

For each primary, there is one additional variable named by prepending ‘EXTRA_’ to the primary name. This variable is used to list objects which may or may not be built, depending on what configure decides. This variable is required because Automake must statically know the entire list of objects that may be built in order to generate a that will work in all cases.

For instance, cpio decides at configure time which programs are built. Some of the programs are installed in bindir, and some are installed in sbindir:

bin_PROGRAMS = cpio pax

Defining a primary variable without a prefix (e.g. PROGRAMS) is an error.

Note that the common ‘dir’ suffix is left off when constructing the variable names; thus one writes ‘bin_PROGRAMS’ and not ‘bindir_PROGRAMS’.

Not every sort of object can be installed in every directory. Automake will flag those attempts it finds in error. Automake will also diagnose obvious misspellings in directory names.

Sometimes the standard directories—even as augmented by Automake— are not enough. In particular it is sometimes useful, for clarity, to install objects in a subdirectory of some predefined directory. To this end, Automake allows you to extend the list of possible installation directories. A given prefix (e.g. ‘zar’) is valid if a variable of the same name with ‘dir’ appended is defined (e.g. zardir).

For instance, until HTML support is part of Automake, you could use this to install raw HTML documentation:

htmldir = $(prefix)/html
html_DATA = automake.html

The special prefix ‘noinst’ indicates that the objects in question should not be installed at all.

The special prefix ‘check’ indicates that the objects in question should not be built until the make check command is run.

Possible primary names are ‘PROGRAMS’, ‘LIBRARIES’, ‘LISP’, ‘SCRIPTS’, ‘DATA’, ‘HEADERS’, ‘MANS’, and ‘TEXINFOS’.

2.5 How derived variables are named

Sometimes a Makefile variable name is derived from some text the user supplies. For instance, program names are rewritten into Makefile macro names. Automake canonicalizes this text, so that it does not have to follow Makefile macro naming rules. All characters in the name except for letters, numbers, and the underscore are turned into underscores when making macro references. For example, if your program is named sniff-glue, the derived variable name would be sniff_glue_SOURCES, not sniff-glue_SOURCES.

3 Some example packages

3.1 A simple example, start to finish

Let’s suppose you just finished writing zardoz, a program to make your head float from vortex to vortex. You’ve been using Autoconf to provide a portability framework, but your Makefile.ins have been ad-hoc. You want to make them bulletproof, so you turn to Automake.

The first step is to update your to include the commands that automake needs. The simplest way to do this is to add an AM_INIT_AUTOMAKE call just after AC_INIT:

AM_INIT_AUTOMAKE(zardoz, 1.0)

Since your program doesn’t have any complicating factors (e.g., it doesn’t use gettext, it doesn’t want to build a shared library), you’re done with this part. That was easy!

Now you must regenerate configure. But to do that, you’ll need to tell autoconf how to find the new macro you’ve used. The easiest way to do this is to use the aclocal program to generate your aclocal.m4 for you. But wait... you already have an aclocal.m4, because you had to write some hairy macros for your program. The aclocal program lets you put your own macros into acinclude.m4, so simply rename and then run:

mv aclocal.m4 acinclude.m4

Now it is time to write your for zardoz. Since zardoz is a user program, you want to install it where the rest of the user programs go. Additionally, zardoz has some Texinfo documentation. Your script uses AC_REPLACE_FUNCS, so you need to link against ‘@LIBOBJS@’. So here’s what you’d write:

bin_PROGRAMS = zardoz
zardoz_SOURCES = main.c head.c float.c vortex9.c gun.c
zardoz_LDADD = @LIBOBJS@

info_TEXINFOS = zardoz.texi

Now you can run automake --add-missing to generate your and grab any auxiliary files you might need, and you’re done!

3.2 A classic program

GNU hello is renowned for its classic simplicity and versatility. This section shows how Automake could be used with the GNU Hello package. The examples below are from the latest beta version of GNU Hello, but with all of the maintainer-only code stripped out, as well as all copyright comments.

Of course, GNU Hello is somewhat more featureful than your traditional two-liner. GNU Hello is internationalized, does option processing, and has a manual and a test suite. GNU Hello is a deep package.

Here is the from GNU Hello:

dnl Process this file with autoconf to produce a configure script.
AM_INIT_AUTOMAKE(hello, 1.3.11)

dnl Set of available languages.
ALL_LINGUAS="de fr es ko nl no pl pt sl sv"

dnl Checks for programs.

dnl Checks for libraries.

dnl Checks for header files.
AC_HAVE_HEADERS(string.h fcntl.h sys/file.h sys/param.h)

dnl Checks for library functions.

dnl Check for st_blksize in struct stat

dnl internationalization macros
AC_OUTPUT([Makefile doc/Makefile intl/Makefile po/ \
           src/Makefile tests/Makefile tests/hello],
   [chmod +x tests/hello])

The ‘AM_’ macros are provided by Automake (or the Gettext library); the rest are standard Autoconf macros.

The top-level

SUBDIRS = doc intl po src tests

As you can see, all the work here is really done in subdirectories.

The po and intl directories are automatically generated using gettextize; they will not be discussed here.

In doc/ we see:

info_TEXINFOS = hello.texi
hello_TEXINFOS = gpl.texi

This is sufficient to build, install, and distribute the GNU Hello manual.

Here is tests/

TESTS = hello
EXTRA_DIST = testdata

The script hello is generated by configure, and is the only test case. make check will run this test.

Last we have src/, where all the real work is done:

bin_PROGRAMS = hello
hello_SOURCES = hello.c version.c getopt.c getopt1.c getopt.h system.h 
localedir = $(datadir)/locale
INCLUDES = -I../intl -DLOCALEDIR=\"$(localedir)\"

3.3 Building etags and ctags

Here is another, trickier example. It shows how to generate two programs (ctags and etags) from the same source file (etags.c). The difficult part is that each compilation of etags.c requires different cpp flags.

bin_PROGRAMS = etags ctags
ctags_SOURCES =
ctags_LDADD = ctags.o

etags.o: etags.c
        $(COMPILE) -DETAGS_REGEXPS -c etags.c

ctags.o: etags.c
        $(COMPILE) -DCTAGS -o ctags.o -c etags.c

Note that ctags_SOURCES is defined to be empty—that way no implicit value is substituted. The implicit value, however, is used to generate etags from etags.o.

ctags_LDADD is used to get ctags.o into the link line. ctags_DEPENDENCIES is generated by Automake.

The above rules won’t work if your compiler doesn’t accept both ‘-c’ and ‘-o’. The simplest fix for this is to introduce a bogus dependency (to avoid problems with a parallel make):

etags.o: etags.c ctags.o
        $(COMPILE) -DETAGS_REGEXPS -c etags.c

ctags.o: etags.c
        $(COMPILE) -DCTAGS -c etags.c && mv etags.o ctags.o

Also, these explicit rules do not work if the de-ANSI-fication feature is used (see Automatic de-ANSI-fication). Supporting de-ANSI-fication requires a little more work:

etags._o: etags._c ctags.o
        $(COMPILE) -DETAGS_REGEXPS -c etags.c

ctags._o: etags._c
        $(COMPILE) -DCTAGS -c etags.c && mv etags._o ctags.o

4 Creating a

To create all the Makefile.ins for a package, run the automake program in the top level directory, with no arguments. automake will automatically find each appropriate (by scanning; see Scanning and generate the corresponding Note that automake has a rather simplistic view of what constitutes a package; it assumes that a package has only one, at the top. If your package has multiple configure.ins, then you must run automake in each directory holding a

You can optionally give automake an argument; .am is appended to the argument and the result is used as the name of the input file. This feature is generally only used to automatically rebuild an out-of-date Note that automake must always be run from the topmost directory of a project, even if being used to regenerate the in some subdirectory. This is necessary because automake must scan, and because automake uses the knowledge that a is in a subdirectory to change its behavior in some cases.

automake accepts the following options:


Automake requires certain common files to exist in certain situations; for instance config.guess is required if runs AC_CANONICAL_HOST. Automake is distributed with several of these files; this option will cause the missing ones to be automatically added to the package, whenever possible. In general if Automake tells you a file is missing, try using this option. By default Automake tries to make a symbolic link pointing to its own copy of the missing file; this can be changed with --copy.


Look for Automake data files in directory dir instead of in the installation directory. This is typically used for debugging.


Tell Automake where the build directory is. This option is used when including dependencies into a generated by make dist; it should not be used otherwise.


When used with --add-missing, causes installed files to be copied. The default is to make a symbolic link.


Causes the generated Makefile.ins to follow Cygnus rules, instead of GNU or Gnits rules. For more information, see The effect of --cygnus.


Set the global strictness to ‘foreign’. For more information, see Strictness.


Set the global strictness to ‘gnits’. For more information, see The effect of --gnu and --gnits.


Set the global strictness to ‘gnu’. For more information, see The effect of --gnu and --gnits. This is the default strictness.


Print a summary of the command line options and exit.


Include all automatically generated dependency information (see Automatic dependency tracking) in the generated This is generally done when making a distribution; see What Goes in a Distribution.


Generate a file concatenating all automatically generated dependency information (see Automatic dependency tracking) into one file, .dep_segment. This is generally done when making a distribution; see What Goes in a Distribution. It is useful when maintaining a SMakefile or makefiles for other platforms (Makefile.DOS, etc.) It can only be used in conjunction with ‘--include-deps’, ‘--srcdir-name’, and ‘--build-dir’. Note that if this option is given, no other processing is done.


Ordinarily automake creates all Makefile.ins mentioned in This option causes it to only update those Makefile.ins which are out of date with respect to one of their dependents.

-o dir

Put the generated in the directory dir. Ordinarily each is created in the directory of the corresponding This option is used when making distributions.


Tell Automake the name of the source directory associated with the current build. This option is used when including dependencies into a generated by make dist; it should not be used otherwise.


Cause Automake to print information about which files are being read or created.


Print the version number of Automake and exit.

5 Scanning

Automake scans the package’s to determine certain information about the package. Some autoconf macros are required and some variables must be defined in Automake will also use information from to further tailor its output.

Automake also supplies some Autoconf macros to make the maintenance easier. These macros can automatically be put into your aclocal.m4 using the aclocal program.

5.1 Configuration requirements

The simplest way to meet the basic Automake requirements is to use the macro AM_INIT_AUTOMAKE (see Autoconf macros supplied with Automake). But if you prefer, you can do the required steps by hand:

  • Define the variables PACKAGE and VERSION with AC_SUBST. PACKAGE should be the name of the package as it appears when bundled for distribution. For instance, Automake defines PACKAGE to be ‘automake’. VERSION should be the version number of the release that is being developed. We recommend that you make the only place in your package where the version number is defined; this makes releases simpler.

    Automake doesn’t do any interpretation of PACKAGE or VERSION, except in ‘Gnits’ mode (see The effect of --gnu and --gnits).

  • Use the macro AC_ARG_PROGRAM if a program or script is installed. See Transforming Program Names When Installing in The Autoconf.
  • Use AC_PROG_MAKE_SET if the package is not flat. See Creating Output Files in The Autoconf Manual.
  • Use AM_SANITY_CHECK to make sure the build environment is sane.
  • Call AC_PROG_INSTALL (see Particular Program Checks in The Autoconf Manual).
  • Use AM_MISSING_PROG to see whether the programs aclocal, autoconf, automake, autoheader, and makeinfo are in the build environment. Here is how this is done:
    missing_dir=`cd $ac_aux_dir && pwd`
    AM_MISSING_PROG(ACLOCAL, aclocal, $missing_dir)
    AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir)
    AM_MISSING_PROG(AUTOMAKE, automake, $missing_dir)
    AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir)
    AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir)

Here are the other macros which Automake requires but which are not run by AM_INIT_AUTOMAKE:


Automake uses this to determine which files to create (see Creating Output Files in The Autoconf Manual). Listed files named Makefile are treated as Makefiles. Other listed files are treated differently. Currently the only difference is that a Makefile is removed by make distclean, while other files are removed by make clean.

5.2 Other things Automake recognizes

Automake will also recognize the use of certain macros and tailor the generated appropriately. Currently recognized macros and their effects are:


Automake requires the use of AM_CONFIG_HEADER, which is similar to AC_CONFIG_HEADER (see Configuration Header Files in The Autoconf Manual), but does some useful Automake-specific work.


Automake will look for various helper scripts, such as mkinstalldirs, in the directory named in this macro invocation. If not seen, the scripts are looked for in their ‘standard’ locations (either the top source directory, or in the source directory corresponding to the current, whichever is appropriate). See Finding ‘configure’ Input in The Autoconf Manual. FIXME: give complete list of things looked for in this directory


Automake will insert definitions for the variables defined by AC_PATH_XTRA into each that builds a C program or library. See System Services in The Autoconf Manual.


Automake will ensure that config.guess and config.sub exist. Also, the Makefile variables ‘host_alias’ and ‘host_triplet’ are introduced. See both Getting the Canonical System Type in The Autoconf Manual, and Generic Program Checks in The Autoconf Manual.


This is similar to AC_CANONICAL_HOST, but also defines the Makefile variables ‘build_alias’ and ‘target_alias’. See Getting the Canonical System Type in The Autoconf Manual.


Automake will ensure that the appropriate dependencies are generated for the objects corresponding to these macros. Also, Automake will verify that the appropriate source files are part of the distribution. Note that Automake does not come with any of the C sources required to use these macros, so automake -a will not install the sources. See Building a library, for more information. Also, see Particular Function Checks in The Autoconf Manual.


Automake will detect statements which put .o files into LIBOBJS, and will treat these additional files as if they were discovered via AC_REPLACE_FUNCS. See Generic Function Checks in The Autoconf Manual.


This is required if any libraries are built in the package. See Particular Program Checks in The Autoconf Manual.


This is required if any C++ source is included. See Particular Program Checks in The Autoconf Manual.


This is required if any Fortran 77 source is included. This macro is distributed with Autoconf version 2.13 and later. See Particular Program Checks in The Autoconf Manual.


This is required for programs and shared libraries that are a mixture of languages that include Fortran 77 (see Mixing Fortran 77 With C and C++). See Autoconf macros supplied with Automake.


Automake will turn on processing for libtool (see Introduction in The Libtool Manual).


If a Yacc source file is seen, then you must either use this macro or define the variable ‘YACC’ in The former is preferred (see Particular Program Checks in The Autoconf Manual).


This macro is required if there is Lex source in the package. See Particular Program Checks in The Autoconf Manual.


If a Lex source file is seen, then this macro must be used. See Particular Program Checks in The Autoconf Manual.


If Automake sees that this variable is set in, it will check the po directory to ensure that all the named ‘.po’ files exist, and that all the ‘.po’ files that exist are named.


This is required when using automatic de-ANSI-fication; see Automatic de-ANSI-fication.


This macro is required for packages which use GNU gettext (see Gettext). It is distributed with gettext. If Automake sees this macro it ensures that the package meets some of gettext’s requirements.


This macro adds a ‘--enable-maintainer-mode’ option to configure. If this is used, automake will cause ‘maintainer-only’ rules to be turned off by default in the generated Makefile.ins. This macro is disallowed in ‘Gnits’ mode (see The effect of --gnu and --gnits). This macro defines the ‘MAINTAINER_MODE’ conditional, which you can use in your own


For each of these macros, the first argument is automatically defined as a variable in each generated See Setting Output Variables in The Autoconf Manual, and Generic Program Checks in The Autoconf Manual.

5.3 Auto-generating aclocal.m4

Automake includes a number of Autoconf macros which can be used in your package; some of them are actually required by Automake in certain situations. These macros must be defined in your aclocal.m4; otherwise they will not be seen by autoconf.

The aclocal program will automatically generate aclocal.m4 files based on the contents of This provides a convenient way to get Automake-provided macros, without having to search around. Also, the aclocal mechanism is extensible for use by other packages.

At startup, aclocal scans all the .m4 files it can find, looking for macro definitions. Then it scans Any mention of one of the macros found in the first step causes that macro, and any macros it in turn requires, to be put into aclocal.m4.

The contents of acinclude.m4, if it exists, are also automatically included in aclocal.m4. This is useful for incorporating local macros into configure.

aclocal accepts the following options:


Look for the macro files in dir instead of the installation directory. This is typically used for debugging.


Print a summary of the command line options and exit.

-I dir

Add the directory dir to the list of directories searched for .m4 files.


Cause the output to be put into file instead of aclocal.m4.


Prints the name of the directory which aclocal will search to find the .m4 files. When this option is given, normal processing is suppressed. This option can be used by a package to determine where to install a macro file.


Print the names of the files it examines.


Print the version number of Automake and exit.

5.4 Autoconf macros supplied with Automake


Automake will generate rules to automatically regenerate the config header. If you do use this macro, you must create the file in your source directory. It can be empty.


This is used when a “multilib” library is being built. A multilib library is one that is built multiple times, once per target flag combination. This is only useful when the library is intended to be cross-compiled. The first optional argument is the name of the Makefile being generated; it defaults to ‘Makefile’. The second option argument is used to find the top source directory; it defaults to the empty string (generally this should not be used unless you are familiar with the internals).


If the strtod function is not available, or does not work correctly (like the one on SunOS 5.4), add strtod.o to output variable LIBOBJS.


If the function error_at_line is not found, then add error.o to LIBOBJS.


Check for a working mktime function. If not found, add mktime.o to ‘LIBOBJS’.


Check for the GNU obstacks code; if not found, add obstack.o to ‘LIBOBJS’.


Check to see if function prototypes are understood by the compiler. If so, define ‘PROTOTYPES’ and set the output variables ‘U’ and ‘ANSI2KNR’ to the empty string. Otherwise, set ‘U’ to ‘_’ and ‘ANSI2KNR’ to ‘./ansi2knr’. Automake uses these values to implement automatic de-ANSI-fication.


If the use of TIOCGWINSZ requires <sys/ioctl.h>, then define GWINSZ_IN_SYS_IOCTL. Otherwise TIOCGWINSZ can be found in <termios.h>.


Runs many macros that most’s need. This macro has two required arguments, the package and the version number. By default this macro AC_DEFINE’s ‘PACKAGE’ and ‘VERSION’. This can be avoided by passing in a non-empty third argument.


Searches for the program emacs, and, if found, sets the output variable lispdir to the full path to Emacs’ site-lisp directory.


If the C compiler in not in ANSI C mode by default, try to add an option to output variable CC to make it so. This macro tries various options that select ANSI C on some system or another. It considers the compiler to be in ANSI C mode if it handles function prototypes correctly.

If you use this macro, you should check after calling it whether the C compiler has been set to accept ANSI C; if not, the shell variable am_cv_prog_cc_stdc is set to ‘no’. If you wrote your source code in ANSI C, you can make an un-ANSIfied copy of it by using the ansi2knr option (see Automatic de-ANSI-fication).


Like AC_PROG_LEX with AC_DECL_YYTEXT (see Particular Program Checks in The Autoconf Manual), but uses the missing script on systems that do not have lex. ‘HP-UX 10’ is one such system.


This checks to make sure that a file created in the build directory is newer than a file in the source directory. This can fail on systems where the clock is set incorrectly. This macro is automatically run from AM_INIT_AUTOMAKE.


Check to see if POSIX termios headers and functions are available on the system. If so, set the shell variable am_cv_sys_posix_termios to ‘yes’. If not, set the variable to ‘no’.


Define ‘HAVE_PTRDIFF_T’ if the type ‘ptrdiff_t’ is defined in <stddef.h>.


Add support for the dmalloc package. If the user configures with ‘--with-dmalloc’, then define WITH_DMALLOC and add ‘-ldmalloc’ to LIBS.


Adds ‘--with-regex’ to the configure command line. If specified (the default), then the ‘regex’ regular expression library is used, regex.o is put into ‘LIBOBJS’, and ‘WITH_REGEX’ is defined.. If ‘--without-regex’ is given, then the ‘rx’ regular expression library is used, and rx.o is put into ‘LIBOBJS’.

5.5 Writing your own aclocal macros

The aclocal program doesn’t have any built-in knowledge of any macros, so it is easy to extend it with your own macros.

This is mostly used for libraries which want to supply their own Autoconf macros for use by other programs. For instance the gettext library supplies a macro AM_GNU_GETTEXT which should be used by any package using gettext. When the library is installed, it installs this macro so that aclocal will find it.

A file of macros should be a series of AC_DEFUN’s. The aclocal programs also understands AC_REQUIRE, so it is safe to put each macro in a separate file. See Prerequisite Macros in The Autoconf Manual, and Macro Definitions in The Autoconf Manual.

A macro file’s name should end in .m4. Such files should be installed in $(datadir)/aclocal.

6 The top-level

In non-flat packages, the top level must tell Automake which subdirectories are to be built. This is done via the SUBDIRS variable.

The SUBDIRS macro holds a list of subdirectories in which building of various sorts can occur. Many targets (e.g. all) in the generated Makefile will run both locally and in all specified subdirectories. Note that the directories listed in SUBDIRS are not required to contain Makefile.ams; only Makefiles (after configuration). This allows inclusion of libraries from packages which do not use Automake (such as gettext). The directories mentioned in SUBDIRS must be direct children of the current directory. For instance, you cannot put ‘src/subdir’ into SUBDIRS.

In a deep package, the top-level is often very short. For instance, here is the from the GNU Hello distribution:

SUBDIRS = doc intl po src tests

It is possible to override the SUBDIRS variable if, like in the case of GNU Inetutils, you want to only build a subset of the entire package. In your include:


Then in your you can specify:

SUBDIRS = "src doc lib po"

The upshot of this is that Automake is tricked into building the package to take the subdirs, but doesn’t actually bind that list until configure is run.

Although the SUBDIRS macro can contain configure substitutions (e.g. ‘@DIRS@’); Automake itself does not actually examine the contents of this variable.

If SUBDIRS is defined, then your must include AC_PROG_MAKE_SET.

The use of SUBDIRS is not restricted to just the top-level Automake can be used to construct packages of arbitrary depth.

By default, Automake generates Makefiles which work depth-first (‘postfix’). However, it is possible to change this ordering. You can do this by putting ‘.’ into SUBDIRS. For instance, putting ‘.’ first will cause a ‘prefix’ ordering of directories.

7 Building Programs and Libraries

A large part of Automake’s functionality is dedicated to making it easy to build programs and libraries.

7.1 Building a program

In a directory containing source that gets built into a program (as opposed to a library), the ‘PROGRAMS’ primary is used. Programs can be installed in bindir, sbindir, libexecdir, pkglibdir, or not at all (‘noinst’).

For instance:

bin_PROGRAMS = hello

In this simple case, the resulting will contain code to generate a program named hello. The variable hello_SOURCES is used to specify which source files get built into an executable:

hello_SOURCES = hello.c version.c getopt.c getopt1.c getopt.h system.h 

This causes each mentioned ‘.c’ file to be compiled into the corresponding ‘.o’. Then all are linked to produce hello.

If ‘prog_SOURCES’ is needed, but not specified, then it defaults to the single file prog.c.

Multiple programs can be built in a single directory. Multiple programs can share a single source file, which must be listed in each ‘_SOURCES’ definition.

Header files listed in a ‘_SOURCES’ definition will be included in the distribution but otherwise ignored. In case it isn’t obvious, you should not include the header file generated by configure in an ‘_SOURCES’ variable; this file should not be distributed. Lex (‘.l’) and Yacc (‘.y’) files can also be listed; see Yacc and Lex support.

Automake must know all the source files that could possibly go into a program, even if not all the files are built in every circumstance. Any files which are only conditionally built should be listed in the appropriate ‘EXTRA_’ variable. For instance, if hello-linux.c were conditionally included in hello, the would contain:

EXTRA_hello_SOURCES = hello-linux.c

Similarly, sometimes it is useful to determine the programs that are to be built at configure time. For instance, GNU cpio only builds mt and rmt under special circumstances.

In this case, you must notify Automake of all the programs that can possibly be built, but at the same time cause the generated to use the programs specified by configure. This is done by having configure substitute values into each ‘_PROGRAMS’ definition, while listing all optionally built programs in EXTRA_PROGRAMS.

If you need to link against libraries that are not found by configure, you can use LDADD to do so. This variable actually can be used to add any options to the linker command line.

Sometimes, multiple programs are built in one directory but do not share the same link-time requirements. In this case, you can use the ‘prog_LDADD’ variable (where prog is the name of the program as it appears in some ‘_PROGRAMS’ variable, and usually written in lowercase) to override the global LDADD. If this variable exists for a given program, then that program is not linked using LDADD.

For instance, in GNU cpio, pax, cpio and mt are linked against the library libcpio.a. However, rmt is built in the same directory, and has no such link requirement. Also, mt and rmt are only built on certain architectures. Here is what cpio’s src/ looks like (abridged):

bin_PROGRAMS = cpio pax @MT@
libexec_PROGRAMS = @RMT@

LDADD = ../lib/libcpio.a @INTLLIBS@
rmt_LDADD =

cpio_SOURCES = …
pax_SOURCES = …
mt_SOURCES = …
rmt_SOURCES = …

prog_LDADD’ is inappropriate for passing program-specific linker flags (except for ‘-l’ and ‘-L’). So, use the ‘prog_LDFLAGS’ variable for this purpose.

It is also occasionally useful to have a program depend on some other target which is not actually part of that program. This can be done using the ‘prog_DEPENDENCIES’ variable. Each program depends on the contents of such a variable, but no further interpretation is done.

If ‘prog_DEPENDENCIES’ is not supplied, it is computed by Automake. The automatically-assigned value is the contents of ‘prog_LDADD’, with most configure substitutions, ‘-l’, and ‘-L’ options removed. The configure substitutions that are left in are only ‘@LIBOBJS@’ and ‘@ALLOCA@’; these are left because it is known that they will not cause an invalid value for ‘prog_DEPENDENCIES’ to be generated.

7.2 Building a library

Building a library is much like building a program. In this case, the name of the primary is ‘LIBRARIES’. Libraries can be installed in libdir or pkglibdir.

See Building a Shared Library, for information on how to build shared libraries using Libtool and the ‘LTLIBRARIES’ primary.

Each ‘_LIBRARIES’ variable is a list of the libraries to be built. For instance to create a library named libcpio.a, but not install it, you would write:

noinst_LIBRARIES = libcpio.a

The sources that go into a library are determined exactly as they are for programs, via the ‘_SOURCES’ variables. Note that the library name is canonicalized (see How derived variables are named), so the ‘_SOURCES’ variable corresponding to liblob.a is ‘liblob_a_SOURCES’, not ‘liblob.a_SOURCES’.

Extra objects can be added to a library using the ‘library_LIBADD’ variable. This should be used for objects determined by configure. Again from cpio:


7.3 Special handling for LIBOBJS and ALLOCA

Automake explicitly recognizes the use of @LIBOBJS@ and @ALLOCA@, and uses this information, plus the list of LIBOBJS files derived from to automatically include the appropriate source files in the distribution (see What Goes in a Distribution). These source files are also automatically handled in the dependency-tracking scheme; see See Automatic dependency tracking.

@LIBOBJS@ and @ALLOCA@ are specially recognized in any ‘_LDADD’ or ‘_LIBADD’ variable.

7.4 Building a Shared Library

Building shared libraries is a relatively complex matter. For this reason, GNU Libtool (see Introduction in The Libtool Manual) was created to help build shared libraries in a platform-independent way.

Automake uses Libtool to build libraries declared with the ‘LTLIBRARIES’ primary. Each ‘_LTLIBRARIES’ variable is a list of shared libraries to build. For instance, to create a library named libgettext.a and its corresponding shared libraries, and install them in ‘libdir’, write:


Note that shared libraries must be installed, so check_LTLIBRARIES is not allowed. However, noinst_LTLIBRARIES is allowed. This feature should be used for libtool “convenience libraries”.

For each library, the ‘library_LIBADD’ variable contains the names of extra libtool objects (.lo files) to add to the shared library. The ‘library_LDFLAGS’ variable contains any additional libtool flags, such as ‘-version-info’ or ‘-static’.

Where an ordinary library might include @LIBOBJS@, a libtool library must use @LTLIBOBJS@. This is required because the object files that libtool operates on do not necessarily end in .o. The libtool manual contains more details on this topic.

For libraries installed in some directory, Automake will automatically supply the appropriate ‘-rpath’ option. However, for libraries determined at configure time (and thus mentioned in EXTRA_LTLIBRARIES), Automake does not know the eventual installation directory; for such libraries you must add the ‘-rpath’ option to the appropriate ‘_LDFLAGS’ variable by hand.

See The Libtool Manual in The Libtool Manual, for more information.

7.5 Variables used when building a program

Occasionally it is useful to know which Makefile variables Automake uses for compilations; for instance you might need to do your own compilation in some special cases.

Some variables are inherited from Autoconf; these are CC, CFLAGS, CPPFLAGS, DEFS, LDFLAGS, and LIBS.

There are some additional variables which Automake itself defines:


A list of ‘-I’ options. This can be set in your if you have special directories you want to look in. Automake already provides some ‘-I’ options automatically. In particular it generates ‘-I$(srcdir)’ and a ‘-I’ pointing to the directory holding config.h (if you’ve used AC_CONFIG_HEADER or AM_CONFIG_HEADER).

INCLUDES can actually be used for other cpp options besides ‘-I’. For instance, it is sometimes used to pass arbitrary ‘-D’ options to the compiler.


This is the command used to actually compile a C source file. The filename is appended to form the complete command line.

This is the command used to actually link a C program.

7.6 Yacc and Lex support

Automake has somewhat idiosyncratic support for Yacc and Lex.

Automake assumes that the .c file generated by yacc (or lex) should be named using the basename of the input file. That is, for a yacc source file foo.y, Automake will cause the intermediate file to be named foo.c (as opposed to, which is more traditional).

The extension of a yacc source file is used to determine the extension of the resulting ‘C’ or ‘C++’ file. Files with the extension ‘.y’ will be turned into ‘.c’ files; likewise, ‘.yy’ will become ‘.cc’; ‘.y++’, ‘c++’; and ‘.yxx’, ‘.cxx’.

Likewise, lex source files can be used to generate ‘C’ or ‘C++’; the extensions ‘.l’, ‘.ll’, ‘.l++’, and ‘.lxx’ are recognized.

You should never explicitly mention the intermediate (‘C’ or ‘C++’) file in any ‘SOURCES’ variable; only list the source file.

The intermediate files generated by yacc (or lex) will be included in any distribution that is made. That way the user doesn’t need to have yacc or lex.

If a yacc source file is seen, then your must define the variable ‘YACC’. This is most easily done by invoking the macro ‘AC_PROG_YACC’ (see Particular Program Checks in The Autoconf Manual).

Similarly, if a lex source file is seen, then your must define the variable ‘LEX’. You can use ‘AC_PROG_LEX’ to do this (see Particular Program Checks in The Autoconf Manual). Automake’s lex support also requires that you use the ‘AC_DECL_YYTEXT’ macro—automake needs to know the value of ‘LEX_OUTPUT_ROOT’. This is all handled for you if you use the AM_PROG_LEX macro (see Autoconf macros supplied with Automake).

Automake makes it possible to include multiple yacc (or lex) source files in a single program. Automake uses a small program called ylwrap to run yacc (or lex) in a subdirectory. This is necessary because yacc’s output filename is fixed, and a parallel make could conceivably invoke more than one instance of yacc simultaneously. The ylwrap program is distributed with Automake. It should appear in the directory specified by ‘AC_CONFIG_AUX_DIR’ (see Finding ‘configure’ Input in The Autoconf Manual), or the current directory if that macro is not used in

For yacc, simply managing locking is insufficient. The output of yacc always uses the same symbol names internally, so it isn’t possible to link two yacc parsers into the same executable.

We recommend using the following renaming hack used in gdb:

#define	yymaxdepth c_maxdepth
#define	yyparse	c_parse
#define	yylex	c_lex
#define	yyerror	c_error
#define	yylval	c_lval
#define	yychar	c_char
#define	yydebug	c_debug
#define	yypact	c_pact	
#define	yyr1	c_r1			
#define	yyr2	c_r2			
#define	yydef	c_def		
#define	yychk	c_chk		
#define	yypgo	c_pgo		
#define	yyact	c_act		
#define	yyexca	c_exca
#define yyerrflag c_errflag
#define yynerrs	c_nerrs
#define	yyps	c_ps
#define	yypv	c_pv
#define	yys	c_s
#define	yy_yys	c_yys
#define	yystate	c_state
#define	yytmp	c_tmp
#define	yyv	c_v
#define	yy_yyv	c_yyv
#define	yyval	c_val
#define	yylloc	c_lloc
#define yyreds	c_reds
#define yytoks	c_toks
#define yylhs	c_yylhs
#define yylen	c_yylen
#define yydefred c_yydefred
#define yydgoto	c_yydgoto
#define yysindex c_yysindex
#define yyrindex c_yyrindex
#define yygindex c_yygindex
#define yytable	 c_yytable
#define yycheck	 c_yycheck
#define yyname   c_yyname
#define yyrule   c_yyrule

For each define, replace the ‘c_’ prefix with whatever you like. These defines work for bison, byacc, and traditional yaccs. If you find a parser generator that uses a symbol not covered here, please report the new name so it can be added to the list.

7.7 C++ Support

Automake includes full support for C++.

Any package including C++ code must define the output variable ‘CXX’ in; the simplest way to do this is to use the AC_PROG_CXX macro (see Particular Program Checks in The Autoconf Manual).

A few additional variables are defined when a C++ source file is seen:


The name of the C++ compiler.


Any flags to pass to the C++ compiler.


The command used to actually compile a C++ source file. The file name is appended to form the complete command line.

The command used to actually link a C++ program.

7.8 Fortran 77 Support

Automake includes full support for Fortran 77.

Any package including Fortran 77 code must define the output variable ‘F77’ in; the simplest way to do this is to use the AC_PROG_F77 macro (see Particular Program Checks in The Autoconf Manual). See Fortran 77 and Autoconf.

A few additional variables are defined when a Fortran 77 source file is seen:


The name of the Fortran 77 compiler.


Any flags to pass to the Fortran 77 compiler.


Any flags to pass to the Ratfor compiler.


The command used to actually compile a Fortran 77 source file. The file name is appended to form the complete command line.

The command used to actually link a pure Fortran 77 program or shared library.

Automake can handle preprocessing Fortran 77 and Ratfor source files in addition to compiling them1. Automake also contains some support for creating programs and shared libraries that are a mixture of Fortran 77 and other languages (see Mixing Fortran 77 With C and C++).

These issues are covered in the following sections.

7.8.1 Preprocessing Fortran 77

N.f is made automatically from N.F or N.r. This rule runs just the preprocessor to convert a preprocessable Fortran 77 or Ratfor source file into a strict Fortran 77 source file. The precise command used is as follows:





7.8.2 Compiling Fortran 77 Files

N.o is made automatically from N.f, N.F or N.r by running the Fortran 77 compiler. The precise command used is as follows:


$(F77) -c $(AM_FFLAGS) $(FFLAGS)





7.8.3 Mixing Fortran 77 With C and C++

Automake currently provides limited support for creating programs and shared libraries that are a mixture of Fortran 77 and C and/or C++. However, there are many other issues related to mixing Fortran 77 with other languages that are not (currently) handled by Automake, but that are handled by other packages2.

Automake can help in two ways:

  1. Automatic selection of the linker depending on which combinations of source code.
  2. Automatic selection of the appropriate linker flags (e.g. ‘-L’ and ‘-l’) to pass to the automatically selected linker in order to link in the appropriate Fortran 77 intrinsic and run-time libraries.

    These extra Fortran 77 linker flags are supplied in the output variable FLIBS by the AC_F77_LIBRARY_LDFLAGS Autoconf macro supplied with newer versions of Autoconf (Autoconf version 2.13 and later). See Fortran 77 Compiler Characteristics in The Autoconf.

If Automake detects that a program or shared library (as mentioned in some _PROGRAMS or _LTLIBRARIES primary) contains source code that is a mixture of Fortran 77 and C and/or C++, then it requires that the macro AC_F77_LIBRARY_LDFLAGS be called in, and that either $(FLIBS) or @FLIBS@ appear in the appropriate _LDADD (for programs) or _LIBADD (for shared libraries) variables. It is the responsibility of the person writing the to make sure that $(FLIBS) or @FLIBS@ appears in the appropriate _LDADD or _LIBADD variable.

For example, consider the following

bin_PROGRAMS = foo
foo_SOURCES  = foo.f
foo_LDADD    = @FLIBS@

libfoo_la_SOURCES  = bar.f baz.c
libfoo_la_LIBADD   = $(FLIBS)

In this case, Automake will insist that AC_F77_LIBRARY_LDFLAGS is mentioned in Also, if @FLIBS@ hadn’t been mentioned in foo_LDADD and libfoo_la_LIBADD, then Automake would have issued a warning. How the Linker is Chosen

The following diagram demonstrates under what conditions a particular linker is chosen by Automake.

For example, if Fortran 77, C and C++ source code were to be compiled into a program, then the C++ linker will be used. In this case, if the C or Fortran 77 linkers required any special libraries that weren’t included by the C++ linker, then they must be manually added to an _LDADD or _LIBADD variable by the user writing the

                     \              Linker
          source      \
           code        \     C        C++     Fortran
     -----------------  +---------+---------+---------+
                        |         |         |         |
     C                  |    x    |         |         |
                        |         |         |         |
                        |         |         |         |
         C++            |         |    x    |         |
                        |         |         |         |
                        |         |         |         |
               Fortran  |         |         |    x    |
                        |         |         |         |
                        |         |         |         |
     C + C++            |         |    x    |         |
                        |         |         |         |
                        |         |         |         |
     C +       Fortran  |         |         |    x    |
                        |         |         |         |
                        |         |         |         |
         C++ + Fortran  |         |    x    |         |
                        |         |         |         |
                        |         |         |         |
     C + C++ + Fortran  |         |    x    |         |
                        |         |         |         |

7.8.4 Fortran 77 and Autoconf

The current Automake support for Fortran 77 requires a recent enough version Autoconf that also includes support for Fortran 77. Full Fortran 77 support was added to Autoconf 2.13, so you will want to use that version of Autoconf or later.

7.9 Support for Other Languages

Automake currently only includes full support for C, C++ (see C++ Support)and Fortran 77 (see Fortran 77 Support). There is only rudimentary support for other languages, support for which will be improved based on user demand.

7.10 Automatic de-ANSI-fication

Although the GNU standards allow the use of ANSI C, this can have the effect of limiting portability of a package to some older compilers (notably SunOS).

Automake allows you to work around this problem on such machines by de-ANSI-fying each source file before the actual compilation takes place.

If the variable AUTOMAKE_OPTIONS (see Changing Automake’s Behavior) contains the option ansi2knr then code to handle de-ANSI-fication is inserted into the generated

This causes each C source file in the directory to be treated as ANSI C. If an ANSI C compiler is available, it is used. If no ANSI C compiler is available, the ansi2knr program is used to convert the source files into K&R C, which is then compiled.

The ansi2knr program is simple-minded. It assumes the source code will be formatted in a particular way; see the ansi2knr man page for details.

Support for de-ANSI-fication requires the source files ansi2knr.c and ansi2knr.1 to be in the same package as the ANSI C source; these files are distributed with Automake. Also, the package must call the macro AM_C_PROTOTYPES (see Autoconf macros supplied with Automake).

Automake also handles finding the ansi2knr support files in some other directory in the current package. This is done by prepending the relative path to the appropriate directory to the ansi2knr option. For instance, suppose the package has ANSI C code in the src and lib subdirs. The files ansi2knr.c and ansi2knr.1 appear in lib. Then this could appear in src/

AUTOMAKE_OPTIONS = ../lib/ansi2knr

If no directory prefix is given, the files are assumed to be in the current directory.

Files mentioned in LIBOBJS which need de-ANSI-fication will not be automatically handled. That’s because configure will generate an object name like regex.o, while make will be looking for regex_.o (when de-ANSI-fying). Eventually this problem will be fixed via autoconf magic, but for now you must put this code into your, just before the AC_OUTPUT call:

# This is necessary so that .o files in LIBOBJS are also built via
# the ANSI2KNR-filtering rules.
LIBOBJS=`echo $LIBOBJS|sed 's/\.o /\$U.o /g;s/\.o$/\$U.o/'`

7.11 Automatic dependency tracking

As a developer it is often painful to continually update the whenever the include-file dependencies change in a project. Automake supplies a way to automatically track dependency changes, and distribute the dependencies in the generated

Currently this support requires the use of GNU make and gcc. It might become possible in the future to supply a different dependency generating program, if there is enough demand. In the meantime, this mode is enabled by default if any C program or library is defined in the current directory, so you may get a ‘Must be a separator’ error from non-GNU make.

When you decide to make a distribution, the dist target will re-run automake with ‘--include-deps’ and other options. See Creating a, and Changing Automake’s Behavior. This will cause the previously generated dependencies to be inserted into the generated, and thus into the distribution. This step also turns off inclusion of the dependency generation code, so that those who download your distribution but don’t use GNU make and gcc will not get errors.

When added to the, the dependencies have all system-specific dependencies automatically removed. This can be done by listing the files in ‘OMIT_DEPENDENCIES’. For instance all references to system header files are removed by Automake. Sometimes it is useful to specify that a certain header file should be removed. For instance if your uses ‘AM_WITH_REGEX’, then any dependency on rx.h or regex.h should be removed, because the correct one cannot be known until the user configures the package.

As it turns out, Automake is actually smart enough to handle the particular case of the regular expression header. It will also automatically omit libintl.h if ‘AM_GNU_GETTEXT’ is used.

Automatic dependency tracking can be suppressed by putting no-dependencies in the variable AUTOMAKE_OPTIONS.

If you unpack a distribution made by make dist, and you want to turn on the dependency-tracking code again, simply re-run automake.

The actual dependency files are put under the build directory, in a subdirectory named .deps. These dependencies are machine specific. It is safe to delete them if you like; they will be automatically recreated during the next build.

8 Other Derived Objects

Automake can handle derived objects which are not C programs. Sometimes the support for actually building such objects must be explicitly supplied, but Automake will still automatically handle installation and distribution.

8.1 Executable Scripts

It is possible to define and install programs which are scripts. Such programs are listed using the ‘SCRIPTS’ primary name. Automake doesn’t define any dependencies for scripts; the should include the appropriate rules.

Automake does not assume that scripts are derived objects; such objects must be deleted by hand (see What Gets Cleaned).

The automake program itself is a Perl script that is generated at configure time from Here is how this is handled:

bin_SCRIPTS = automake

Since automake appears in the AC_OUTPUT macro, a target for it is automatically generated.

Script objects can be installed in bindir, sbindir, libexecdir, or pkgdatadir.

8.2 Header files

Header files are specified by the ‘HEADERS’ family of variables. Generally header files are not installed, so the noinst_HEADERS variable will be the most used.

All header files must be listed somewhere; missing ones will not appear in the distribution. Often it is clearest to list uninstalled headers with the rest of the sources for a program. See Building a program. Headers listed in a ‘_SOURCES’ variable need not be listed in any ‘_HEADERS’ variable.

Headers can be installed in includedir, oldincludedir, or pkgincludedir.

8.3 Architecture-independent data files

Automake supports the installation of miscellaneous data files using the ‘DATA’ family of variables.

Such data can be installed in the directories datadir, sysconfdir, sharedstatedir, localstatedir, or pkgdatadir.

By default, data files are not included in a distribution.

Here is how Automake installs its auxiliary data files:

pkgdata_DATA = …

8.4 Built sources

Occasionally a file which would otherwise be called ‘source’ (e.g. a C ‘.h’ file) is actually derived from some other file. Such files should be listed in the BUILT_SOURCES variable.

Built sources are also not compiled by default. You must explicitly mention them in some other ‘_SOURCES’ variable for this to happen.

Note that, in some cases, BUILT_SOURCES will work in somewhat surprising ways. In order to get the built sources to work with automatic dependency tracking, the Makefile must depend on $(BUILT_SOURCES). This can cause these sources to be rebuilt at what might seem like funny times.

9 Other GNU Tools

Since Automake is primarily intended to generate Makefile.ins for use in GNU programs, it tries hard to interoperate with other GNU tools.

Next: , Previous: , Up: Other GNU Tools   [Contents][Index]

9.1 Emacs Lisp

Automake provides some support for Emacs Lisp. The ‘LISP’ primary is used to hold a list of .el files. Possible prefixes for this primary are ‘lisp_’ and ‘noinst_’. Note that if lisp_LISP is defined, then must run AM_PATH_LISPDIR (see Autoconf macros supplied with Automake).

By default Automake will byte-compile all Emacs Lisp source files using the Emacs found by AM_PATH_LISPDIR. If you wish to avoid byte-compiling, simply define the variable ELCFILES to be empty. Byte-compiled Emacs Lisp files are not portable among all versions of Emacs, so it makes sense to turn this off if you expect sites to have more than one version of Emacs installed. Furthermore, many packages don’t actually benefit from byte-compilation. Still, we recommend that you leave it enabled by default. It is probably better for sites with strange setups to cope for themselves than to make the installation less nice for everybody else.

Next: , Previous: , Up: Other GNU Tools   [Contents][Index]

9.2 Gettext

If AM_GNU_GETTEXT is seen in, then Automake turns on support for GNU gettext, a message catalog system for internationalization (see GNU Gettext in GNU gettext utilities).

The gettext support in Automake requires the addition of two subdirectories to the package, intl and po. Automake insures that these directories exist and are mentioned in SUBDIRS.

Furthermore, Automake checks that the definition of ALL_LINGUAS in corresponds to all the valid .po files, and nothing more.

Next: , Previous: , Up: Other GNU Tools   [Contents][Index]

9.3 Guile

Automake provides some automatic support for writing Guile modules. Automake will turn on Guile support if the AM_INIT_GUILE_MODULE macro is used in

Right now Guile support just means that the AM_INIT_GUILE_MODULE macro is understood to mean:

  • AM_INIT_AUTOMAKE is run.
  • AC_CONFIG_AUX_DIR is run, with a path of ...

As the Guile module code matures, no doubt the Automake support will grow as well.

Next: , Previous: , Up: Other GNU Tools   [Contents][Index]

9.4 Libtool

Automake provides support for GNU Libtool (see Introduction in The Libtool Manual) with the ‘LTLIBRARIES’ primary. See Building a Shared Library.

Previous: , Up: Other GNU Tools   [Contents][Index]

9.5 Java

Automake provides some minimal support for Java compilation with the ‘JAVA’ primary.

Any .java files listed in a ‘_JAVA’ variable will be compiled with JAVAC at build time. By default, .class files are not included in the distribution.

Currently Automake enforces the restriction that only one ‘_JAVA’ primary can be used in a given The reason for this restriction is that, in general, it isn’t possible to know which .class files were generated from which .java files – so it would be impossible to know which files to install where.

10 Building documentation

Currently Automake provides support for Texinfo and man pages.

10.1 Texinfo

If the current directory contains Texinfo source, you must declare it with the ‘TEXINFOS’ primary. Generally Texinfo files are converted into info, and thus the info_TEXINFOS macro is most commonly used here. Note that any Texinfo source file must end in the .texi or .texinfo extension.

If the .texi file @includes version.texi, then that file will be automatically generated. The file version.texi defines three Texinfo macros you can reference: EDITION, VERSION, and UPDATED. The first two hold the version number of your package (but are kept separate for clarity); the last is the date the primary file was last modified. The version.texi support requires the mdate-sh program; this program is supplied with Automake and automatically included when automake is invoked with the --add-missing option.

Sometimes an info file actually depends on more than one .texi file. For instance, in GNU Hello, hello.texi includes the file gpl.texi. You can tell Automake about these dependencies using the texi_TEXINFOS variable. Here is how GNU Hello does it:

info_TEXINFOS = hello.texi
hello_TEXINFOS = gpl.texi

By default, Automake requires the file texinfo.tex to appear in the same directory as the Texinfo source. However, if you used AC_CONFIG_AUX_DIR in (see Finding ‘configure’ Input in The Autoconf Manual), then texinfo.tex is looked for there. Automake supplies texinfo.tex if ‘--add-missing’ is given.

If your package has Texinfo files in many directories, you can use the variable TEXINFO_TEX to tell Automake where to find the canonical texinfo.tex for your package. The value of this variable should be the relative path from the current to texinfo.tex:

TEXINFO_TEX = ../doc/texinfo.tex

The option ‘no-texinfo.tex’ can be used to eliminate the requirement for texinfo.tex. Use of the variable TEXINFO_TEX is preferable, however, because that allows the dvi target to still work.

Automake generates an install-info target; some people apparently use this. By default, info pages are installed by ‘make install’. This can be prevented via the no-installinfo option.

10.2 Man pages

A package can also include man pages (but see the GNU standards on this matter, Man Pages in The GNU Coding Standards.) Man pages are declared using the ‘MANS’ primary. Generally the man_MANS macro is used. Man pages are automatically installed in the correct subdirectory of mandir, based on the file extension. They are not automatically included in the distribution.

By default, man pages are installed by ‘make install’. However, since the GNU project does not require man pages, many maintainers do not expend effort to keep the man pages up to date. In these cases, the no-installman option will prevent the man pages from being installed by default. The user can still explicitly install them via ‘make install-man’.

Here is how the documentation is handled in GNU cpio (which includes both Texinfo documentation and man pages):

info_TEXINFOS = cpio.texi
man_MANS = cpio.1 mt.1

Texinfo source and info pages are all considered to be source for the purposes of making a distribution.

Man pages are not currently considered to be source, because it is not uncommon for man pages to be automatically generated. For the same reason, they are not automatically included in the distribution.

11 What Gets Installed

Naturally, Automake handles the details of actually installing your program once it has been built. All PROGRAMS, SCRIPTS, LIBRARIES, LISP, DATA and HEADERS are automatically installed in the appropriate places.

Automake also handles installing any specified info and man pages.

Automake generates separate install-data and install-exec targets, in case the installer is installing on multiple machines which share directory structure—these targets allow the machine-independent parts to be installed only once. The install target depends on both of these targets.

Automake also generates an uninstall target, an installdirs target, and an install-strip target.

It is possible to extend this mechanism by defining an install-exec-local or install-data-local target. If these targets exist, they will be run at ‘make install’ time.

Variables using the standard directory prefixes ‘data’, ‘info’, ‘man’, ‘include’, ‘oldinclude’, ‘pkgdata’, or ‘pkginclude’ (e.g. ‘data_DATA’) are installed by ‘install-data’.

Variables using the standard directory prefixes ‘bin’, ‘sbin’, ‘libexec’, ‘sysconf’, ‘localstate’, ‘lib’, or ‘pkglib’ (e.g. ‘bin_PROGRAMS’) are installed by ‘install-exec’.

Any variable using a user-defined directory prefix with ‘exec’ in the name (e.g. ‘myexecbin_PROGRAMS’ is installed by ‘install-exec’. All other user-defined prefixes are installed by ‘install-data’.

Automake generates support for the ‘DESTDIR’ variable in all install rules. ‘DESTDIR’ is used during the ‘make install’ step to relocate install objects into a staging area. Each object and path is prefixed with the value of ‘DESTDIR’ before being copied into the install area. Here is an example of typical DESTDIR usage:

make DESTDIR=/tmp/staging install

This places install objects in a directory tree built under /tmp/staging. If /gnu/bin/foo and /gnu/share/aclocal/foo.m4 are to be installed, the above command would install /tmp/staging/gnu/bin/foo and /tmp/staging/gnu/share/aclocal/foo.m4.

This feature is commonly used to build install images and packages. For more information, see Makefile Conventions in The GNU Coding Standards.

12 What Gets Cleaned

The GNU Makefile Standards specify a number of different clean rules. Generally the files that can be cleaned are determined automatically by Automake. Of course, Automake also recognizes some variables that can be defined to specify additional files to clean. These variables are MOSTLYCLEANFILES, CLEANFILES, DISTCLEANFILES, and MAINTAINERCLEANFILES.

13 What Goes in a Distribution

The dist target in the generated can be used to generate a gzip’d tar file for distribution. The tar file is named based on the ‘PACKAGE’ and ‘VERSION’ variables; more precisely it is named ‘package-version.tar.gz’. You can use the make variable ‘GZIP_ENV’ to control how gzip is run. The default setting is ‘--best’.

For the most part, the files to distribute are automatically found by Automake: all source files are automatically included in a distribution, as are all Makefile.ams and Makefile.ins. Automake also has a built-in list of commonly used files which, if present in the current directory, are automatically included. This list is printed by ‘automake --help’. Also, files which are read by configure (i.e. the source files corresponding to the files specified in the AC_OUTPUT invocation) are automatically distributed.

Still, sometimes there are files which must be distributed, but which are not covered in the automatic rules. These files should be listed in the EXTRA_DIST variable. You can mention files from subdirectories in EXTRA_DIST. You can also mention a directory there; in this case the entire directory will be recursively copied into the distribution.

If you define SUBDIRS, Automake will recursively include the subdirectories in the distribution. If SUBDIRS is defined conditionally (see Conditionals), Automake will normally include all directories that could possibly appear in SUBDIRS in the distribution. If you need to specify the set of directories conditionally, you can set the variable DIST_SUBDIRS to the exact list of subdirectories to include in the distribution.

Occasionally it is useful to be able to change the distribution before it is packaged up. If the dist-hook target exists, it is run after the distribution directory is filled, but before the actual tar (or shar) file is created. One way to use this is for distributing files in subdirectories for which a new is overkill:

        mkdir $(distdir)/random
        cp -p $(srcdir)/random/a1 $(srcdir)/random/a2 $(distdir)/random

Automake also generates a distcheck target which can be help to ensure that a given distribution will actually work. distcheck makes a distribution, and then tries to do a VPATH build.

14 Support for test suites

Automake supports two forms of test suites.

If the variable TESTS is defined, its value is taken to be a list of programs to run in order to do the testing. The programs can either be derived objects or source objects; the generated rule will look both in srcdir and .. Programs needing data files should look for them in srcdir (which is both an environment variable and a make variable) so they work when building in a separate directory (see Build Directories in The Autoconf Manual), and in particular for the distcheck target (see What Goes in a Distribution).

The number of failures will be printed at the end of the run. If a given test program exits with a status of 77, then its result is ignored in the final count. This feature allows non-portable tests to be ignored in environments where they don’t make sense.

The variable TESTS_ENVIRONMENT can be used to set environment variables for the test run; the environment variable srcdir is set in the rule. If all your test programs are scripts, you can also set TESTS_ENVIRONMENT to an invocation of the shell (e.g. ‘$(SHELL) -x’); this can be useful for debugging the tests.

If dejagnu appears in AUTOMAKE_OPTIONS, then a dejagnu-based test suite is assumed. The value of the variable DEJATOOL is passed as the --tool argument to runtest; it defaults to the name of the package.

The variable RUNTESTDEFAULTFLAGS holds the --tool and --srcdir flags that are passed to dejagnu by default; this can be overridden if necessary.

The variables EXPECT, RUNTEST and RUNTESTFLAGS can also be overridden to provide project-specific values. For instance, you will need to do this if you are testing a compiler toolchain, because the default values do not take into account host and target names.

In either case, the testing is done via ‘make check’.

15 Changing Automake’s Behavior

Various features of Automake can be controlled by options in the Such options are listed in a special variable named AUTOMAKE_OPTIONS. Currently understood options are:


Set the strictness as appropriate. The gnits option also implies readme-alpha and check-news.


Turn on automatic de-ANSI-fication. See Automatic de-ANSI-fication. If preceded by a path, the generated will look in the specified directory to find the ansi2knr program. Generally the path should be a relative path to another directory in the same distribution (though Automake currently does not check this).


Cause make dist to fail unless the current version number appears in the first few lines of the NEWS file.


Cause dejagnu-specific rules to be generated. See Support for test suites.


Generate a dist-shar target as well as the ordinary dist target. This new target will create a shar archive of the distribution.


Generate a dist-zip target as well as the ordinary dist target. This new target will create a zip archive of the distribution.


Generate a dist-tarZ target as well as the ordinary dist target. This new target will create a compressed tar archive of the distribution; a traditional tar and compress will be assumed. Warning: if you are actually using GNU tar, then the generated archive might contain nonportable constructs.


This is similar to using ‘--include-deps’ on the command line, but is useful for those situations where you don’t have the necessary bits to make automatic dependency tracking work See Automatic dependency tracking. In this case the effect is to effectively disable automatic dependency tracking.


The generated will not cause info pages to be built or installed by default. However, info and install-info targets will still be available. This option is disallowed at ‘GNU’ strictness and above.


The generated will not cause man pages to be installed by default. However, an install-man target will still be available for optional installation. This option is disallowed at ‘GNU’ strictness and above.


Don’t require texinfo.tex, even if there are texinfo files in this directory.


If this release is an alpha release, and the file README-alpha exists, then it will be added to the distribution. If this option is given, version numbers are expected to follow one of two forms. The first form is ‘MAJOR.MINOR.ALPHA’, where each element is a number; the final period and number should be left off for non-alpha releases. The second form is ‘MAJOR.MINORALPHA’, where ALPHA is a letter; it should be omitted for non-alpha releases.


A version number (e.g. ‘0.30’) can be specified. If Automake is not newer than the version specified, creation of the will be suppressed.

Unrecognized options are diagnosed by automake.

16 Miscellaneous Rules

There are a few rules and variables that didn’t fit anywhere else.

16.1 Interfacing to etags

Automake will generate rules to generate TAGS files for use with GNU Emacs under some circumstances.

If any C, C++ or Fortran 77 source code or headers are present, then tags and TAGS targets will be generated for the directory.

At the topmost directory of a multi-directory package, a tags target file will be generated which, when run, will generate a TAGS file that includes by reference all TAGS files from subdirectories.

Also, if the variable ETAGS_ARGS is defined, a tags target will be generated. This variable is intended for use in directories which contain taggable source that etags does not understand.

Here is how Automake generates tags for its source, and for nodes in its Texinfo file:

ETAGS_ARGS = --lang=none \
 --regex='/^@node[ \t]+\([^,]+\)/\1/' automake.texi

If you add filenames to ‘ETAGS_ARGS’, you will probably also want to set ‘TAGS_DEPENDENCIES’. The contents of this variable are added directly to the dependencies for the tags target.

Automake will also generate an ID target which will run mkid on the source. This is only supported on a directory-by-directory basis.

16.2 Handling new file extensions

It is sometimes useful to introduce a new implicit rule to handle a file type that Automake does not know about. If this is done, you must notify GNU Make of the new suffixes. This can be done by putting a list of new suffixes in the SUFFIXES variable.

For instance, currently Automake does not provide any Java support. If you wrote a macro to generate ‘.class’ files from ‘.java’ source files, you would also need to add these suffixes to the list:

SUFFIXES = .java .class

17 Include

To include another file (perhaps for common rules), the following syntax is supported:

include ($(srcdir)|$(top_srcdir))/filename

Using files in the current directory:

include $(srcdir)/Makefile.extra
include Makefile.generated

Using a file in the top level directory:

include $(top_srcdir)/filename

18 Conditionals

Automake supports a simple type of conditionals.

Before using a conditional, you must define it by using AM_CONDITIONAL in the file (see Autoconf macros supplied with Automake). The AM_CONDITIONAL macro takes two arguments.

The first argument to AM_CONDITIONAL is the name of the conditional. This should be a simple string starting with a letter and containing only letters, digits, and underscores.

The second argument to AM_CONDITIONAL is a shell condition, suitable for use in a shell if statement. The condition is evaluated when configure is run.

Conditionals typically depend upon options which the user provides to the configure script. Here is an example of how to write a conditional which is true if the user uses the ‘--enable-debug’ option.

[  --enable-debug    Turn on debugging],
[case "${enableval}" in
  yes) debug=true ;;
  no)  debug=false ;;
  *) AC_MSG_ERROR(bad value ${enableval} for --enable-debug) ;;
AM_CONDITIONAL(DEBUG, test x$debug = xtrue)

Here is an example of how to use that conditional in

DBG = debug
noinst_PROGRAMS = $(DBG)

This trivial example could also be handled using EXTRA_PROGRAMS (see Building a program).

You may only test a single variable in an if statement. The else statement may be omitted. Conditionals may be nested to any depth.

Note that conditionals in Automake are not the same as conditionals in GNU Make. Automake conditionals are checked at configure time by the configure script, and affect the translation from to Makefile. They are based on options passed to configure and on results that configure has discovered about the host system. GNU Make conditionals are checked at make time, and are based on variables passed to the make program or defined in the Makefile.

Automake conditionals will work with any make program.

19 The effect of --gnu and --gnits

The ‘--gnu’ option (or ‘gnu’ in the ‘AUTOMAKE_OPTIONS’ variable) causes automake to check the following:

Note that this option will be extended in the future to do even more checking; it is advisable to be familiar with the precise requirements of the GNU standards. Also, ‘--gnu’ can require certain non-standard GNU programs to exist for use by various maintainer-only targets; for instance in the future pathchk might be required for ‘make dist’.

The ‘--gnits’ option does everything that ‘--gnu’ does, and checks the following as well:

20 The effect of --cygnus

Cygnus Solutions has slightly different rules for how a is to be constructed. Passing ‘--cygnus’ to automake will cause any generated to comply with Cygnus rules.

Here are the precise effects of ‘--cygnus’:

GNU maintainers are advised to use ‘gnu’ strictness in preference to the special Cygnus mode.

21 When Automake Isn’t Enough

Automake’s implicit copying semantics means that many problems can be worked around by simply adding some make targets and rules to Automake will ignore these additions.

There are some caveats to doing this. Although you can overload a target already used by Automake, it is often inadvisable, particularly in the topmost directory of a non-flat package. However, various useful targets have a ‘-local’ version you can specify in your Automake will supplement the standard target with these user-supplied targets.

The targets that support a local version are all, info, dvi, check, install-data, install-exec, uninstall, and the various clean targets (mostlyclean, clean, distclean, and maintainer-clean). Note that there are no uninstall-exec-local or uninstall-data-local targets; just use uninstall-local. It doesn’t make sense to uninstall just data or just executables.

For instance, here is one way to install a file in /etc:

        $(INSTALL_DATA) $(srcdir)/afile /etc/afile

Some targets also have a way to run another target, called a hook, after their work is done. The hook is named after the principal target, with ‘-hook’ appended. The targets allowing hooks are install-data, install-exec, dist, and distcheck.

For instance, here is how to create a hard link to an installed program:

        ln $(bindir)/program $(bindir)/proglink

22 Distributing Makefile.ins

Automake places no restrictions on the distribution of the resulting Makefile.ins. We still encourage software authors to distribute their work under terms like those of the GPL, but doing so is not required to use Automake.

Some of the files that can be automatically installed via the --add-missing switch do fall under the GPL; examine each file to see.

23 Some ideas for the future

Here are some things that might happen in the future:

Macro and Variable Index

Jump to:   _  
A   B   C   D   E   F   H   I   L   M   N   O   P   R   S   T   V   W   Y  
Index Entry  Section

_LDADD: A Program
_LDFLAGS: A Program
_LIBADD: A Library
_SOURCES: A Program
_TEXINFOS: Texinfo

AC_ARG_PROGRAM: Requirements
AC_OUTPUT: Requirements
AC_PATH_PROG: Optional
AC_PATH_XTRA: Optional
AC_PROG_CXX: Optional
AC_PROG_F77: Optional
AC_PROG_INSTALL: Requirements
AC_PROG_LEX: Optional
AC_PROG_MAKE_SET: Requirements
AC_PROG_YACC: Optional
AC_SUBST: Optional
AM_CONDITIONAL: Conditionals
am_cv_sys_posix_termios: Macros
AM_INIT_AUTOMAKE: Requirements

bin_PROGRAMS: A Program
bin_SCRIPTS: Scripts
build_alias: Optional

check_LTLIBRARIES: A Shared Library
COMPILE: Program variables
CXX: C++ Support
CXXFLAGS: C++ Support
CXXLINK: C++ Support

DATA: Uniform
DATA: Data
data_DATA: Data
DESTDIR: Install

ELCFILES: Emacs Lisp

F77: Fortran 77 Support
F77COMPILE: Fortran 77 Support
FFLAGS: Fortran 77 Support
FLINK: Fortran 77 Support

HEADERS: Uniform
HEADERS: Headers
host_alias: Optional
host_triplet: Optional

INCLUDES: Program variables
include_HEADERS: Headers
info_TEXINFOS: Texinfo

LDADD: A Program
LDFLAGS: Program variables
LIBADD: A Library
libexec_PROGRAMS: A Program
libexec_SCRIPTS: Scripts
LIBOBJS: Optional
lib_LIBRARIES: A Library
lib_LTLIBRARIES: A Shared Library
LINK: Program variables
LISP: Uniform
LISP: Emacs Lisp
lisp_LISP: Emacs Lisp
localstate_DATA: Data

MANS: Uniform
MANS: Man pages
man_MANS: Man pages

noinst_HEADERS: Headers
noinst_LIBRARIES: A Library
noinst_LISP: Emacs Lisp
noinst_LTLIBRARIES: A Shared Library
noinst_PROGRAMS: A Program
noinst_SCRIPTS: Scripts

oldinclude_HEADERS: Headers

PACKAGE: Uniform
PACKAGE: Requirements
pkgdatadir: Uniform
pkgdata_DATA: Data
pkgdata_SCRIPTS: Scripts
pkgincludedir: Uniform
pkginclude_HEADERS: Headers
pkglibdir: Uniform
pkglib_LIBRARIES: A Library
pkglib_LTLIBRARIES: A Shared Library
pkglib_PROGRAMS: A Program
ptrdiff_t: Macros

RFLAGS: Fortran 77 Support

sbin_PROGRAMS: A Program
sbin_SCRIPTS: Scripts
SCRIPTS: Uniform
SCRIPTS: Scripts
sharedstate_DATA: Data
SOURCES: A Program
SUBDIRS: Top level
SUFFIXES: Suffixes
sysconf_DATA: Data

target_alias: Optional
TESTS: Tests

VERSION: Requirements


YACC: Optional

Jump to:   _  
A   B   C   D   E   F   H   I   L   M   N   O   P   R   S   T   V   W   Y  

General Index

Jump to:   #   -   @   _  
A   B   C   D   E   F   G   H   I   J   L   M   N   O   P   R   S   T   U   V   Y   Z  
Index Entry  Section

## (special Automake comment): General Operation

--acdir: Invoking aclocal
--add-missing: Invoking Automake
--amdir: Invoking Automake
--build-dir: Invoking Automake
--cygnus: Invoking Automake
--enable-maintainer-mode: Optional
--foreign: Invoking Automake
--generate-deps: Invoking Automake
--gnits: Invoking Automake
--gnu: Invoking Automake
--help: Invoking Automake
--help: Invoking aclocal
--include-deps: Invoking Automake
--no-force: Invoking Automake
--output: Invoking aclocal
--output-dir: Invoking Automake
--print-ac-dir: Invoking aclocal
--srcdir-name: Invoking Automake
--verbose: Invoking Automake
--verbose: Invoking aclocal
--version: Invoking Automake
--version: Invoking aclocal
--with-dmalloc: Macros
--with-regex: Macros
-a: Invoking Automake
–enable-debug, example: Conditionals
–gnits, complete description: Gnits
–gnu, complete description: Gnits
–gnu, required files: Gnits
-hook targets: Extending
-i: Invoking Automake
-I: Invoking aclocal
-local targets: Extending
-o: Invoking Automake
-v: Invoking Automake

@ALLOCA@, special handling: LIBOBJS
@LIBOBJS@, special handling: LIBOBJS
@LTLIBOBJS@, special handling: A Shared Library

_DATA primary, defined: Data
_DEPENDENCIES, defined: A Program
_HEADERS primary, defined: Headers
_JAVA primary, defined: Java
_LDFLAGS, defined: A Program
_LIBADD primary, defined: A Library
_LIBRARIES primary, defined: A Library
_LISP primary, defined: Emacs Lisp
_LTLIBRARIES primary, defined: A Shared Library
_MANS primary, defined: Man pages
_PROGRAMS primary variable: Uniform
_SCRIPTS primary, defined: Scripts
_SOURCES and header files: A Program
_SOURCES primary, defined: A Program
_TEXINFOS primary, defined: Texinfo

acinclude.m4, defined: Complete
aclocal program, introduction: Complete
aclocal, extending: Extending aclocal
aclocal, Invoking: Invoking aclocal
aclocal.m4, preexisting: Complete
AC_OUTPUT, scanning: Requirements
Adding new SUFFIXES: Suffixes
all: Extending
all-local: Extending
AM_INIT_AUTOMAKE, example use: Complete
ansi2knr: ANSI
Automake constraints: Introduction
Automake options: Invoking Automake
Automake requirements: Introduction
Automake requirements: Requirements
Automake, invoking: Invoking Automake
Automake, recursive operation: General Operation
Automatic linker selection: How the Linker is Chosen

BUGS, reporting: Introduction
BUILT_SOURCES, defined: Sources

C++ support: C++ Support
canonicalizing Automake macros: Canonicalization
cfortran: Mixing Fortran 77 With C and C++
check: Extending
check primary prefix, definition: Uniform
check-local: Extending
check_LTLIBRARIES, not allowed: A Shared Library
clean-local: Extending
Comment, special to Automake: General Operation
Complete example: Complete
Conditional example, –enable-debug: Conditionals
Conditionals: Conditionals
config.guess: Invoking Automake, from GNU Hello: Hello, scanning: configure
Constraints of Automake: Introduction
cpio example: Uniform
ctags Example: etags
cvs-dist: General Operation
cvs-dist, non-standard example: General Operation
Cygnus strictness: Cygnus

DATA primary, defined: Data
de-ANSI-fication, defined: ANSI
Deep package: Depth
dejagnu: Tests
dist: Dependencies
dist: Dist
dist-hook: Dist
dist-hook: Extending
dist-shar: Options
dist-tarZ: Options
dist-zip: Options
distcheck: Dist
distclean-local: Extending
dmalloc, support for: Macros
dvi: Extending
dvi-local: Extending

E-mail, bug reports: Introduction
EDITION Texinfo macro: Texinfo
else: Conditionals
endif: Conditionals
etags Example: etags
Example conditional –enable-debug: Conditionals
Example of recursive operation: General Operation
Example of shared libraries: A Shared Library
Example, ctags and etags: etags
Example, EXTRA_PROGRAMS: Uniform
Example, GNU Hello: Hello
Example, handling Texinfo files: Hello
Example, mixed language: Mixing Fortran 77 With C and C++
Example, regression test: Hello
Exit status 77, special interpretation: Tests
Extending aclocal: Extending aclocal
Extending list of installation directories: Uniform
Extra files distributed with Automake: Invoking Automake
EXTRA_, prepending: Uniform
EXTRA_PROGRAMS, defined: Uniform
EXTRA_PROGRAMS, defined: A Program
EXTRA_prog_SOURCES, defined: A Program

Files distributed with Automake: Invoking Automake
First line of General Operation
Flat package: Depth
FLIBS, defined: Mixing Fortran 77 With C and C++
foreign strictness: Strictness
Fortran 77 support: Fortran 77 Support
Fortran 77, mixing with C and C++: Mixing Fortran 77 With C and C++
Fortran 77, Preprocessing: Preprocessing Fortran 77
Future directions: Future

Gettext support: gettext
gnits strictness: Strictness
gnits strictness: Strictness
GNU Gettext support: gettext
GNU Hello, Hello
GNU Hello, example: Hello
GNU make extensions: General Operation
GNU Makefile standards: Introduction
Guile rewrite: Future

Header files in _SOURCES: A Program
HEADERS primary, defined: Headers
HEADERS, installation directories: Headers
Hello example: Hello
Hello, Hello
hook targets: Extending
HP-UX 10, lex problems: Macros
HTML support, example: Uniform

id: Tags
if: Conditionals
include: Include
INCLUDES, example usage: Hello
info: Options
info: Extending
info-local: Extending
install: Install
install-data: Install
install-data: Extending
install-data-hook: Extending
install-data-local: Install
install-data-local: Extending
install-exec: Install
install-exec: Extending
install-exec-hook: Extending
install-exec-local: Install
install-exec-local: Extending
install-info: Texinfo
install-info: Options
install-info target: Texinfo
install-man: Man pages
install-man: Options
install-man target: Man pages
install-strip: Install
Installation directories, extending list: Uniform
Installation support: Install
installdirs: Install
Installing headers: Headers
Installing scripts: Scripts
Invoking aclocal: Invoking aclocal
Invoking Automake: Invoking Automake

JAVA primary, defined: Java
JAVA restrictions: Java

lex problems with HP-UX 10: Macros
lex, multiple lexers: Yacc and Lex
LIBADD primary, defined: A Library
LIBRARIES primary, defined: A Library
Linking Fortran 77 with C and C++: Mixing Fortran 77 With C and C++
LISP primary, defined: Emacs Lisp
local targets: Extending
LTLIBRARIES primary, defined: A Shared Library

Macros Automake recognizes: Optional
Macros, overriding: General Operation
make check: Tests
make clean support: Clean
make dist: Dist
make distcheck: Dist
make install support: Install
Make targets, overriding: General Operation, first line: General Operation
MANS primary, defined: Man pages
mdate-sh: Texinfo
Mixed language example: Mixing Fortran 77 With C and C++
Mixing Fortran 77 with C and C++: Mixing Fortran 77 With C and C++
Mixing Fortran 77 with C and/or C++: Mixing Fortran 77 With C and C++
mostlyclean-local: Extending
Multiple files: Invoking Automake
Multiple lex lexers: Yacc and Lex
Multiple yacc parsers: Yacc and Lex

no-dependencies: Dependencies
no-installinfo: Texinfo
no-installman: Man pages
no-texinfo.tex: Texinfo
noinst primary prefix, definition: Uniform
noinstall-info target: Texinfo
noinstall-man target: Man pages
Non-GNU packages: Strictness
Non-standard targets: General Operation

Option, ansi2knr: Options
Option, check-news: Options
Option, cygnus: Options
Option, dejagnu: Options
Option, dist-shar: Options
Option, dist-tarZ: Options
Option, dist-zip: Options
Option, foreign: Options
Option, gnits: Options
Option, gnu: Options
Option, no-dependencies: Options
Option, no-installinfo: Options
Option, no-installman: Options
Option, no-texinfo: Options
Option, readme-alpha: Options
Option, version: Options
Options, Automake: Invoking Automake
Overriding make macros: General Operation
Overriding make targets: General Operation
Overriding SUBDIRS: Top level

Package, deep: Depth
Package, Flat: Depth
Package, shallow: Depth
pkgdatadir, defined: Uniform
pkgincludedir, defined: Uniform
pkglibdir, defined: Uniform
POSIX termios headers: Macros
Preprocessing Fortran 77: Preprocessing Fortran 77
Primary variable, DATA: Data
Primary variable, defined: Uniform
Primary variable, HEADERS: Headers
Primary variable, JAVA: Java
Primary variable, LIBADD: A Library
Primary variable, LIBRARIES: A Library
Primary variable, LISP: Emacs Lisp
Primary variable, LTLIBRARIES: A Shared Library
Primary variable, MANS: Man pages
Primary variable, PROGRAMS: Uniform
Primary variable, SCRIPTS: Scripts
Primary variable, SOURCES: A Program
Primary variable, TEXINFOS: Texinfo
PROGRAMS primary variable: Uniform
PROGRAMS, bindir: A Program
prog_LDADD, defined: A Program

Ratfor programs: Preprocessing Fortran 77
README-alpha: Gnits
Recognized macros by Automake: Optional
Recursive operation of Automake: General Operation
regex package: Macros
Regression test example: Hello
Reporting BUGS: Introduction
Requirements of Automake: Requirements
Requirements, Automake: Introduction
Restrictions for JAVA: Java
rx package: Macros

Scanning configure
SCRIPTS primary, defined: Scripts
SCRIPTS, installation directories: Scripts
Selecting the linker automatically: How the Linker is Chosen
Shallow package: Depth
Shared libraries, support for: A Shared Library
SOURCES primary, defined: A Program
Special Automake comment: General Operation
Strictness, defined: Strictness
Strictness, foreign: Strictness
Strictness, gnits: Strictness
Strictness, gnu: Strictness
SUBDIRS, deep package: Depth
SUBDIRS, explained: Top level
SUBDIRS, overriding: Top level
suffix .la, defined: A Shared Library
suffix .lo, defined: A Shared Library
SUFFIXES, adding: Suffixes
Support for C++: C++ Support
Support for Fortran 77: Fortran 77 Support
Support for GNU Gettext: gettext

tags: Tags
TAGS support: Tags
Target, install-info: Texinfo
Target, install-man: Man pages
Target, noinstall-info: Texinfo
Target, noinstall-man: Man pages
termios POSIX headers: Macros
Test suites: Tests
Texinfo file handling example: Hello
Texinfo macro, EDITION: Texinfo
Texinfo macro, UPDATED: Texinfo
Texinfo macro, VERSION: Texinfo
texinfo.tex: Texinfo
TEXINFOS primary, defined: Texinfo

Uniform naming scheme: Uniform
uninstall: Install
uninstall: Extending
uninstall-local: Extending
UPDATED Texinfo macro: Texinfo

VERSION Texinfo macro: Texinfo

yacc, multiple parsers: Yacc and Lex
ylwrap: Yacc and Lex

zardoz example: Complete

Jump to:   #   -   @   _  
A   B   C   D   E   F   G   H   I   J   L   M   N   O   P   R   S   T   U   V   Y   Z  



Much, if not most, of the information in the following sections pertaining to preprocessing Fortran 77 programs was taken almost verbatim from Catalogue of Rules in The GNU Make Manual.


For example, the cfortran package addresses all of these inter-language issues, and runs under nearly all Fortran 77, C and C++ compilers on nearly all platforms. However, cfortran is not yet Free Software, but it will be in the next major release.