Revised(5) Scheme

20 February 1998

Next: , Previous: , Up: (dir)   [Contents][Index]

Revised(5) Report on the Algorithmic Language Scheme


RICHARD KELSEY, WILLIAM CLINGER, AND JONATHAN REES (Editors)


H. ABELSONR. K. DYBVIGC. T. HAYNESG. J. ROZAS
N. I. ADAMS IVD. P. FRIEDMANE. KOHLBECKERG. L. STEELE JR.
D. H. BARTLEYR. HALSTEADD. OXLEYG. J. SUSSMAN
G. BROOKSC. HANSONK. M. PITMANM. WAND


Dedicated to the Memory of Robert Hieb




Summary

The report gives a defining description of the programming language Scheme. Scheme is a statically scoped and properly tail-recursive dialect of the Lisp programming language invented by Guy Lewis Steele Jr. and Gerald Jay Sussman. It was designed to have an exceptionally clear and simple semantics and few different ways to form expressions. A wide variety of programming paradigms, including imperative, functional, and message passing styles, find convenient expression in Scheme.

The introduction offers a brief history of the language and of the report.

The first three chapters present the fundamental ideas of the language and describe the notational conventions used for describing the language and for writing programs in the language.

Chapters Expressions and Program structure describe the syntax and semantics of expressions, programs, and definitions.

Chapter Standard procedures describes Scheme’s built-in procedures, which include all of the language’s data manipulation and input/output primitives.

Chapter Formal syntax and semantics provides a formal syntax for Scheme written in extended BNF, along with a formal denotational semantics. An example of the use of the language follows the formal syntax and semantics.

The report concludes with a list of references and an alphabetic index.

Contents


Next: , Previous: , Up: top   [Contents][Index]

Introduction

Programming languages should be designed not by piling feature on top of feature, but by removing the weaknesses and restrictions that make additional features appear necessary. Scheme demonstrates that a very small number of rules for forming expressions, with no restrictions on how they are composed, suffice to form a practical and efficient programming language that is flexible enough to support most of the major programming paradigms in use today.

Scheme was one of the first programming languages to incorporate first class procedures as in the lambda calculus, thereby proving the usefulness of static scope rules and block structure in a dynamically typed language. Scheme was the first major dialect of Lisp to distinguish procedures from lambda expressions and symbols, to use a single lexical environment for all variables, and to evaluate the operator position of a procedure call in the same way as an operand position. By relying entirely on procedure calls to express iteration, Scheme emphasized the fact that tail-recursive procedure calls are essentially goto’s that pass arguments. Scheme was the first widely used programming language to embrace first class escape procedures, from which all previously known sequential control structures can be synthesized. A subsequent version of Scheme introduced the concept of exact and inexact numbers, an extension of Common Lisp’s generic arithmetic. More recently, Scheme became the first programming language to support hygienic macros, which permit the syntax of a block-structured language to be extended in a consistent and reliable manner.


Next: , Previous: , Up: Introduction   [Contents][Index]

Background

The first description of Scheme was written in 1975 [Scheme75]. A revised report [Scheme78] appeared in 1978, which described the evolution of the language as its MIT implementation was upgraded to support an innovative compiler [Rabbit]. Three distinct projects began in 1981 and 1982 to use variants of Scheme for courses at MIT, Yale, and Indiana University [Rees82], [MITScheme], [Scheme311]. An introductory computer science textbook using Scheme was published in 1984 [SICP].

As Scheme became more widespread, local dialects began to diverge until students and researchers occasionally found it difficult to understand code written at other sites. Fifteen representatives of the major implementations of Scheme therefore met in October 1984 to work toward a better and more widely accepted standard for Scheme.

Their report [RRRS] was published at MIT and Indiana University in the summer of 1985. Further revision took place in the spring of 1986 [R3RS], and in the spring of 1988 [R4RS]. The present report reflects further revisions agreed upon in a meeting at Xerox PARC in June 1992.




We intend this report to belong to the entire Scheme community, and so we grant permission to copy it in whole or in part without fee. In particular, we encourage implementors of Scheme to use this report as a starting point for manuals and other documentation, modifying it as necessary.


Previous: , Up: Introduction   [Contents][Index]

Acknowledgements

We would like to thank the following people for their help: Alan Bawden, Michael Blair, George Carrette, Andy Cromarty, Pavel Curtis, Jeff Dalton, Olivier Danvy, Ken Dickey, Bruce Duba, Marc Feeley, Andy Freeman, Richard Gabriel, Yekta G"ursel, Ken Haase, Robert Hieb, Paul Hudak, Morry Katz, Chris Lindblad, Mark Meyer, Jim Miller, Jim Philbin, John Ramsdell, Mike Shaff, Jonathan Shapiro, Julie Sussman, Perry Wagle, Daniel Weise, Henry Wu, and Ozan Yigit. We thank Carol Fessenden, Daniel Friedman, and Christopher Haynes for permission to use text from the Scheme 311 version 4 reference manual. We thank Texas Instruments, Inc. for permission to use text from the TI Scheme Language Reference Manual[TImanual85]. We gladly acknowledge the influence of manuals for MIT Scheme[MITScheme], T[Rees84], Scheme 84[Scheme84],Common Lisp[CLtL], and Algol 60[Naur63].

We also thank Betty Dexter for the extreme effort she put into setting this report in TeX, and Donald Knuth for designing the program that caused her troubles.

The Artificial Intelligence Laboratory of the Massachusetts Institute of Technology, the Computer Science Department of Indiana University, the Computer and Information Sciences Department of the University of Oregon, and the NEC Research Institute supported the preparation of this report. Support for the MIT work was provided in part by the Advanced Research Projects Agency of the Department of Defense under Office of Naval Research contract N00014-80-C-0505. Support for the Indiana University work was provided by NSF grants NCS 83-04567 and NCS 83-03325.




Next: , Previous: , Up: top   [Contents][Index]

1 Overview of Scheme


Next: , Previous: , Up: Overview of Scheme   [Contents][Index]

1.1 Semantics

This section gives an overview of Scheme’s semantics. A detailed informal semantics is the subject of chapters Basic concepts through Standard procedures. For reference purposes, section Formal semantics provides a formal semantics of Scheme.

Following Algol, Scheme is a statically scoped programming language. Each use of a variable is associated with a lexically apparent binding of that variable.

Scheme has latent as opposed to manifest types. Types are associated with values (also called objects) rather than with variables. (Some authors refer to languages with latent types as weakly typed or dynamically typed languages.) Other languages with latent types are APL, Snobol, and other dialects of Lisp. Languages with manifest types (sometimes referred to as strongly typed or statically typed languages) include Algol 60, Pascal, and C.

All objects created in the course of a Scheme computation, including procedures and continuations, have unlimited extent. No Scheme object is ever destroyed. The reason that implementations of Scheme do not (usually!) run out of storage is that they are permitted to reclaim the storage occupied by an object if they can prove that the object cannot possibly matter to any future computation. Other languages in which most objects have unlimited extent include APL and other Lisp dialects.

Implementations of Scheme are required to be properly tail-recursive. This allows the execution of an iterative computation in constant space, even if the iterative computation is described by a syntactically recursive procedure. Thus with a properly tail-recursive implementation, iteration can be expressed using the ordinary procedure-call mechanics, so that special iteration constructs are useful only as syntactic sugar. See section Proper tail recursion.

Scheme procedures are objects in their own right. Procedures can be created dynamically, stored in data structures, returned as results of procedures, and so on. Other languages with these properties include Common Lisp and ML.

One distinguishing feature of Scheme is that continuations, which in most other languages only operate behind the scenes, also have “first-class” status. Continuations are useful for implementing a wide variety of advanced control constructs, including non-local exits, backtracking, and coroutines. See section Control features.

Arguments to Scheme procedures are always passed by value, which means that the actual argument expressions are evaluated before the procedure gains control, whether the procedure needs the result of the evaluation or not. ML, C, and APL are three other languages that always pass arguments by value. This is distinct from the lazy-evaluation semantics of Haskell, or the call-by-name semantics of Algol 60, where an argument expression is not evaluated unless its value is needed by the procedure.

Scheme’s model of arithmetic is designed to remain as independent as possible of the particular ways in which numbers are represented within a computer. In Scheme, every integer is a rational number, every rational is a real, and every real is a complex number. Thus the distinction between integer and real arithmetic, so important to many programming languages, does not appear in Scheme. In its place is a distinction between exact arithmetic, which corresponds to the mathematical ideal, and inexact arithmetic on approximations. As in Common Lisp, exact arithmetic is not limited to integers.


Next: , Previous: , Up: Overview of Scheme   [Contents][Index]

1.2 Syntax

Scheme, like most dialects of Lisp, employs a fully parenthesized prefix notation for programs and (other) data; the grammar of Scheme generates a sublanguage of the language used for data. An important consequence of this simple, uniform representation is the susceptibility of Scheme programs and data to uniform treatment by other Scheme programs. For example, the ‘eval’ procedure evaluates a Scheme program expressed as data.

The ‘read’ procedure performs syntactic as well as lexical decomposition of the data it reads. The ‘read’ procedure parses its input as data (section see External representation), not as program.

The formal syntax of Scheme is described in section Formal syntax.


Previous: , Up: Overview of Scheme   [Contents][Index]

1.3 Notation and terminology


Next: , Previous: , Up: Notation and terminology   [Contents][Index]

1.3.1 Primitive; library; and optional features

It is required that every implementation of Scheme support all features that are not marked as being optional. Implementations are free to omit optional features of Scheme or to add extensions, provided the extensions are not in conflict with the language reported here. In particular, implementations must support portable code by providing a syntactic mode that preempts no lexical conventions of this report.

To aid in understanding and implementing Scheme, some features are marked as library. These can be easily implemented in terms of the other, primitive, features. They are redundant in the strict sense of the word, but they capture common patterns of usage, and are therefore provided as convenient abbreviations.


Next: , Previous: , Up: Notation and terminology   [Contents][Index]

1.3.2 Error situations and unspecified behavior

When speaking of an error situation, this report uses the phrase “an error is signalled” to indicate that implementations must detect and report the error. If such wording does not appear in the discussion of an error, then implementations are not required to detect or report the error, though they are encouraged to do so. An error situation that implementations are not required to detect is usually referred to simply as “an error.”

For example, it is an error for a procedure to be passed an argument that the procedure is not explicitly specified to handle, even though such domain errors are seldom mentioned in this report. Implementations may extend a procedure’s domain of definition to include such arguments.

This report uses the phrase “may report a violation of an implementation restriction” to indicate circumstances under which an implementation is permitted to report that it is unable to continue execution of a correct program because of some restriction imposed by the implementation. Implementation restrictions are of course discouraged, but implementations are encouraged to report violations of implementation restrictions.

For example, an implementation may report a violation of an implementation restriction if it does not have enough storage to run a program.

If the value of an expression is said to be “unspecified,” then the expression must evaluate to some object without signalling an error, but the value depends on the implementation; this report explicitly does not say what value should be returned.


Next: , Previous: , Up: Notation and terminology   [Contents][Index]

1.3.3 Entry format

Chapters Expressions and Standard procedures are organized into entries. Each entry describes one language feature or a group of related features, where a feature is either a syntactic construct or a built-in procedure. An entry begins with one or more header lines of the form

category: template

for required, primitive features, or

qualifier category: template

where qualifier is either “library” or “optional” as defined in section Primitive; library; and optional features.

If category is “syntax”, the entry describes an expression type, and the template gives the syntax of the expression type. Components of expressions are designated by syntactic variables, which are written using angle brackets, for example, <expression>, <variable>. Syntactic variables should be understood to denote segments of program text; for example, <expression> stands for any string of characters which is a syntactically valid expression. The notation

 <thing1>

indicates zero or more occurrences of a <thing>, and

 <thing1> <thing2>

indicates one or more occurrences of a <thing>.

If category is “procedure”, then the entry describes a procedure, and the header line gives a template for a call to the procedure. Argument names in the template are italicized. Thus the header line

procedure: vector-ref vector k

indicates that the built-in procedure vector-ref takes two arguments, a vector vector and an exact non-negative integer k (see below). The header lines

procedure: make-vector k
procedure: make-vector k fill

indicate that the make-vector procedure must be defined to take either one or two arguments.

It is an error for an operation to be presented with an argument that it is not specified to handle. For succinctness, we follow the convention that if an argument name is also the name of a type listed in section Disjointness of types, then that argument must be of the named type. For example, the header line for vector-ref given above dictates that the first argument to vector-ref must be a vector. The following naming conventions also imply type restrictions:

obj

any object

list, list1, … listj, …

list (see section see Pairs and lists)

z, z1, … zj, …

complex number

x, x1, … xj, …

real number

y, y1, … yj, …

real number

q, q1, … qj, …

rational number

n, n1, … nj, …

integer

k, k1, … kj, …

exact non-negative integer


Next: , Previous: , Up: Notation and terminology   [Contents][Index]

1.3.4 Evaluation examples

The symbol “⇒” used in program examples should be read “evaluates to.” For example,


(* 5 8)                                ==>  40

means that the expression (* 5 8) evaluates to the object 40. Or, more precisely: the expression given by the sequence of characters “(* 5 8)” evaluates, in the initial environment, to an object that may be represented externally by the sequence of characters “40”. See section External representations for a discussion of external representations of objects.


Previous: , Up: Notation and terminology   [Contents][Index]

1.3.5 Naming conventions

By convention, the names of procedures that always return a boolean value usually end in “?”. Such procedures are called predicates.

By convention, the names of procedures that store values into previously allocated locations (see section see Storage model) usually end in “!”. Such procedures are called mutation procedures. By convention, the value returned by a mutation procedure is unspecified.

By convention, “->” appears within the names of procedures that take an object of one type and return an analogous object of another type. For example, ‘list->vector’ takes a list and returns a vector whose elements are the same as those of the list.


Next: , Previous: , Up: top   [Contents][Index]

2 Lexical conventions

This section gives an informal account of some of the lexical conventions used in writing Scheme programs. For a formal syntax of Scheme, see section Formal syntax.

Upper and lower case forms of a letter are never distinguished except within character and string constants. For example, ‘Foo’ is the same identifier as ‘FOO’, and #x1AB is the same number as #X1ab.


Next: , Previous: , Up: Lexical conventions   [Contents][Index]

2.1 Identifiers

Most identifiers allowed by other programming languages are also acceptable to Scheme. The precise rules for forming identifiers vary among implementations of Scheme, but in all implementations a sequence of letters, digits, and “extended alphabetic characters” that begins with a character that cannot begin a number is an identifier. In addition, +, -, and ... are identifiers. Here are some examples of identifiers:


lambda                   q
list->vector             soup
+                        V17a
<=?                      a34kTMNs
the-word-recursion-has-many-meanings

Extended alphabetic characters may be used within identifiers as if they were letters. The following are extended alphabetic characters:


! $ % & * + - . / : < = > ? @ ^ _ ~ 

See section Lexical structure for a formal syntax of identifiers.

Identifiers have two uses within Scheme programs:


Next: , Previous: , Up: Lexical conventions   [Contents][Index]

2.2 Whitespace and comments

Whitespace characters are spaces and newlines. (Implementations typically provide additional whitespace characters such as tab or page break.) Whitespace is used for improved readability and as necessary to separate tokens from each other, a token being an indivisible lexical unit such as an identifier or number, but is otherwise insignificant. Whitespace may occur between any two tokens, but not within a token. Whitespace may also occur inside a string, where it is significant.

A semicolon (;) indicates the start of a comment. The comment continues to the end of the line on which the semicolon appears. Comments are invisible to Scheme, but the end of the line is visible as whitespace. This prevents a comment from appearing in the middle of an identifier or number.


;;; The FACT procedure computes the factorial
;;; of a non-negative integer.
(define fact
  (lambda (n)
    (if (= n 0)
        1        ;Base case: return 1
        (* n (fact (- n 1))))))


Previous: , Up: Lexical conventions   [Contents][Index]

2.3 Other notations

For a description of the notations used for numbers, see section Numbers.

. + -

These are used in numbers, and may also occur anywhere in an identifier except as the first character. A delimited plus or minus sign by itself is also an identifier. A delimited period (not occurring within a number or identifier) is used in the notation for pairs (section see Pairs and lists), and to indicate a rest-parameter in a formal parameter list (section see Procedures). A delimited sequence of three successive periods is also an identifier.

( )

Parentheses are used for grouping and to notate lists (section see Pairs and lists).

'

The single quote character is used to indicate literal data (section see Literal expressions).

`

The backquote character is used to indicate almost-constant data (section see Quasiquotation).

, ,@

The character comma and the sequence comma at-sign are used in conjunction with backquote (section see Quasiquotation).

"

The double quote character is used to delimit strings (section see Strings).

\

Backslash is used in the syntax for character constants (section see Characters) and as an escape character within string constants (section see Strings).

[ ] { } |

Left and right square brackets and curly braces and vertical bar are reserved for possible future extensions to the language.

#

Sharp sign is used for a variety of purposes depending on the character that immediately follows it:

#t #f

These are the boolean constants (section see Booleans).

#\

This introduces a character constant (section see Characters).

#(

This introduces a vector constant (section see Vectors). Vector constants are terminated by ) .

#e #i #b #o #d #x

These are used in the notation for numbers (section see Syntax of numerical constants).


Next: , Previous: , Up: top   [Contents][Index]

3 Basic concepts


Next: , Previous: , Up: Basic concepts   [Contents][Index]

3.1 Variables; syntactic keywords; and regions

An identifier may name a type of syntax, or it may name a location where a value can be stored. An identifier that names a type of syntax is called a syntactic keyword and is said to be bound to that syntax. An identifier that names a location is called a variable and is said to be bound to that location. The set of all visible bindings in effect at some point in a program is known as the environment in effect at that point. The value stored in the location to which a variable is bound is called the variable’s value. By abuse of terminology, the variable is sometimes said to name the value or to be bound to the value. This is not quite accurate, but confusion rarely results from this practice.

Certain expression types are used to create new kinds of syntax and bind syntactic keywords to those new syntaxes, while other expression types create new locations and bind variables to those locations. These expression types are called binding constructs.

Those that bind syntactic keywords are listed in section Macros. The most fundamental of the variable binding constructs is the ‘lambda’ expression, because all other variable binding constructs can be explained in terms of ‘lambda’ expressions. The other variable binding constructs are ‘let’, ‘let*’, ‘letrec’, and ‘do’ expressions (see sections see Procedures, see Binding constructs, and see Iteration).

Like Algol and Pascal, and unlike most other dialects of Lisp except for Common Lisp, Scheme is a statically scoped language with block structure. To each place where an identifier is bound in a program there corresponds a region of the program text within which the binding is visible. The region is determined by the particular binding construct that establishes the binding; if the binding is established by a ‘lambda’ expression, for example, then its region is the entire ‘lambda’ expression. Every mention of an identifier refers to the binding of the identifier that established the innermost of the regions containing the use. If there is no binding of the identifier whose region contains the use, then the use refers to the binding for the variable in the top level environment, if any (chapters see Expressions and see Standard procedures); if there is no binding for the identifier, it is said to be unbound.


Next: , Previous: , Up: Basic concepts   [Contents][Index]

3.2 Disjointness of types

No object satisfies more than one of the following predicates:


boolean?          pair?
symbol?           number?
char?             string?
vector?           port?
procedure?

These predicates define the types boolean, pair, symbol, number, char (or character), string, vector, port, and procedure. The empty list is a special object of its own type; it satisfies none of the above predicates.

Although there is a separate boolean type, any Scheme value can be used as a boolean value for the purpose of a conditional test. As explained in section Booleans, all values count as true in such a test except for #f. This report uses the word “true” to refer to any Scheme value except #f, and the word “false” to refer to #f.


Next: , Previous: , Up: Basic concepts   [Contents][Index]

3.3 External representations

An important concept in Scheme (and Lisp) is that of the external representation of an object as a sequence of characters. For example, an external representation of the integer 28 is the sequence of characters “28”, and an external representation of a list consisting of the integers 8 and 13 is the sequence of characters “(8 13)”.

The external representation of an object is not necessarily unique. The integer 28 also has representations “#e28.000” and “#x1c”, and the list in the previous paragraph also has the representations “( 08 13 )” and “(8 . (13 . ()))” (see section see Pairs and lists).

Many objects have standard external representations, but some, such as procedures, do not have standard representations (although particular implementations may define representations for them).

An external representation may be written in a program to obtain the corresponding object (see ‘quote’, section see Literal expressions).

External representations can also be used for input and output. The procedure ‘read’ (section see Input) parses external representations, and the procedure ‘write’ (section see Output) generates them. Together, they provide an elegant and powerful input/output facility.

Note that the sequence of characters “(+ 2 6)” is not an external representation of the integer 8, even though it is an expression evaluating to the integer 8; rather, it is an external representation of a three-element list, the elements of which are the symbol + and the integers 2 and 6. Scheme’s syntax has the property that any sequence of characters that is an expression is also the external representation of some object. This can lead to confusion, since it may not be obvious out of context whether a given sequence of characters is intended to denote data or program, but it is also a source of power, since it facilitates writing programs such as interpreters and compilers that treat programs as data (or vice versa).

The syntax of external representations of various kinds of objects accompanies the description of the primitives for manipulating the objects in the appropriate sections of chapter Standard procedures.


Next: , Previous: , Up: Basic concepts   [Contents][Index]

3.4 Storage model

Variables and objects such as pairs, vectors, and strings implicitly denote locations or sequences of locations. A string, for example, denotes as many locations as there are characters in the string. (These locations need not correspond to a full machine word.) A new value may be stored into one of these locations using the string-set! procedure, but the string continues to denote the same locations as before.

An object fetched from a location, by a variable reference or by a procedure such as ‘car’, ‘vector-ref’, or ‘string-ref’, is equivalent in the sense of eqv? (section see Equivalence predicates) to the object last stored in the location before the fetch.

Every location is marked to show whether it is in use. No variable or object ever refers to a location that is not in use. Whenever this report speaks of storage being allocated for a variable or object, what is meant is that an appropriate number of locations are chosen from the set of locations that are not in use, and the chosen locations are marked to indicate that they are now in use before the variable or object is made to denote them.

In many systems it is desirable for constants (i.e. the values of literal expressions) to reside in read-only-memory. To express this, it is convenient to imagine that every object that denotes locations is associated with a flag telling whether that object is mutable or immutable. In such systems literal constants and the strings returned by symbol->string are immutable objects, while all objects created by the other procedures listed in this report are mutable. It is an error to attempt to store a new value into a location that is denoted by an immutable object.


Previous: , Up: Basic concepts   [Contents][Index]

3.5 Proper tail recursion

Implementations of Scheme are required to be properly tail-recursive. Procedure calls that occur in certain syntactic contexts defined below are ‘tail calls’. A Scheme implementation is properly tail-recursive if it supports an unbounded number of active tail calls. A call is active if the called procedure may still return. Note that this includes calls that may be returned from either by the current continuation or by continuations captured earlier by ‘call-with-current-continuation’ that are later invoked. In the absence of captured continuations, calls could return at most once and the active calls would be those that had not yet returned. A formal definition of proper tail recursion can be found in [propertailrecursion].

Rationale:

Intuitively, no space is needed for an active tail call because the continuation that is used in the tail call has the same semantics as the continuation passed to the procedure containing the call. Although an improper implementation might use a new continuation in the call, a return to this new continuation would be followed immediately by a return to the continuation passed to the procedure. A properly tail-recursive implementation returns to that continuation directly.

Proper tail recursion was one of the central ideas in Steele and Sussman’s original version of Scheme. Their first Scheme interpreter implemented both functions and actors. Control flow was expressed using actors, which differed from functions in that they passed their results on to another actor instead of returning to a caller. In the terminology of this section, each actor finished with a tail call to another actor.

Steele and Sussman later observed that in their interpreter the code for dealing with actors was identical to that for functions and thus there was no need to include both in the language.

A tail call is a procedure call that occurs in a tail context. Tail contexts are defined inductively. Note that a tail context is always determined with respect to a particular lambda expression.

Certain built-in procedures are also required to perform tail calls. The first argument passed to apply and to call-with-current-continuation, and the second argument passed to call-with-values, must be called via a tail call. Similarly, eval must evaluate its argument as if it were in tail position within the eval procedure.

In the following example the only tail call is the call to ‘f’. None of the calls to ‘g’ or ‘h’ are tail calls. The reference to ‘x’ is in a tail context, but it is not a call and thus is not a tail call.


(lambda ()
  (if (g)
      (let ((x (h)))
        x)
      (and (g) (f))))

Note: Implementations are allowed, but not required, to recognize that some non-tail calls, such as the call to ‘h’ above, can be evaluated as though they were tail calls. In the example above, the ‘let’ expression could be compiled as a tail call to ‘h’. (The possibility of ‘h’ returning an unexpected number of values can be ignored, because in that case the effect of the ‘let’ is explicitly unspecified and implementation-dependent.)


Next: , Previous: , Up: top   [Contents][Index]

4 Expressions

Expression types are categorized as primitive or derived. Primitive expression types include variables and procedure calls. Derived expression types are not semantically primitive, but can instead be defined as macros. With the exception of ‘quasiquote’, whose macro definition is complex, the derived expressions are classified as library features. Suitable definitions are given in section Derived expression type.


Next: , Previous: , Up: Expressions   [Contents][Index]

4.1 Primitive expression types


Next: , Previous: , Up: Primitive expression types   [Contents][Index]

4.1.1 Variable references

syntax: <variable>

An expression consisting of a variable (section see Variables; syntactic keywords; and regions) is a variable reference. The value of the variable reference is the value stored in the location to which the variable is bound. It is an error to reference an unbound variable.

(define x 28)
x                                      ==>  28


Next: , Previous: , Up: Primitive expression types   [Contents][Index]

4.1.2 Literal expressions

syntax: quote <datum>
syntax: '<datum>
syntax: <constant>

(quote <datum>)’ evaluates to <datum>. <Datum> may be any external representation of a Scheme object (see section see External representations). This notation is used to include literal constants in Scheme code.


(quote a)                              ==>  a
(quote #(a b c))                       ==>  #(a b c)
(quote (+ 1 2))                        ==>  (+ 1 2)

(quote <datum>)’ may be abbreviated as '<datum>. The two notations are equivalent in all respects.

'a                                     ==>  a
'#(a b c)                              ==>  #(a b c)
'()                                    ==>  ()
'(+ 1 2)                               ==>  (+ 1 2)
'(quote a)                             ==>  (quote a)
''a                                    ==>  (quote a)

Numerical constants, string constants, character constants, and boolean constants evaluate “to themselves”; they need not be quoted.

'"abc"                                 ==>  "abc"
"abc"                                  ==>  "abc"
'145932                                ==>  145932
145932                                 ==>  145932
'#t                                    ==>  #t
#t                                     ==>  #t

As noted in section Storage model, it is an error to alter a constant (i.e. the value of a literal expression) using a mutation procedure like ‘set-car!’ or ‘string-set!’.


Next: , Previous: , Up: Primitive expression types   [Contents][Index]

4.1.3 Procedure calls

syntax: <operator> <operand1> …,

A procedure call is written by simply enclosing in parentheses expressions for the procedure to be called and the arguments to be passed to it. The operator and operand expressions are evaluated (in an unspecified order) and the resulting procedure is passed the resulting arguments.


(+ 3 4)                                ==>  7
((if #f + *) 3 4)                      ==>  12

A number of procedures are available as the values of variables in the initial environment; for example, the addition and multiplication procedures in the above examples are the values of the variables ‘+’ and ‘*’. New procedures are created by evaluating lambda expressions (see section see Procedures).

Procedure calls may return any number of values (see values in section see Control features). With the exception of ‘values’ the procedures available in the initial environment return one value or, for procedures such as ‘apply’, pass on the values returned by a call to one of their arguments.

Procedure calls are also called combinations.

Note: In contrast to other dialects of Lisp, the order of evaluation is unspecified, and the operator expression and the operand expressions are always evaluated with the same evaluation rules.

Note: Although the order of evaluation is otherwise unspecified, the effect of any concurrent evaluation of the operator and operand expressions is constrained to be consistent with some sequential order of evaluation. The order of evaluation may be chosen differently for each procedure call.

Note: In many dialects of Lisp, the empty combination, (), is a legitimate expression. In Scheme, combinations must have at least one subexpression, so () is not a syntactically valid expression.


Next: , Previous: , Up: Primitive expression types   [Contents][Index]

4.1.4 Procedures

syntax: lambda <formals> <body>

Syntax: <Formals> should be a formal arguments list as described below, and <body> should be a sequence of one or more expressions.

Semantics: A lambda expression evaluates to a procedure. The environment in effect when the lambda expression was evaluated is remembered as part of the procedure. When the procedure is later called with some actual arguments, the environment in which the lambda expression was evaluated will be extended by binding the variables in the formal argument list to fresh locations, the corresponding actual argument values will be stored in those locations, and the expressions in the body of the lambda expression will be evaluated sequentially in the extended environment. The result(s) of the last expression in the body will be returned as the result(s) of the procedure call.

(lambda (x) (+ x x))                   ==>  a procedure
((lambda (x) (+ x x)) 4)               ==>  8

(define reverse-subtract
  (lambda (x y) (- y x)))
(reverse-subtract 7 10)                ==>  3

(define add4
  (let ((x 4))
    (lambda (y) (+ x y))))
(add4 6)                               ==>  10

<Formals> should have one of the following forms:

It is an error for a <variable> to appear more than once in <formals>.

((lambda x x) 3 4 5 6)                 ==>  (3 4 5 6)
((lambda (x y . z) z)
 3 4 5 6)                              ==>  (5 6)

Each procedure created as the result of evaluating a lambda expression is (conceptually) tagged with a storage location, in order to make eqv? and eq? work on procedures (see section see Equivalence predicates).


Next: , Previous: , Up: Primitive expression types   [Contents][Index]

4.1.5 Conditionals

syntax: if <test> <consequent> <alternate>
syntax: if <test> <consequent>

Syntax: <Test>, <consequent>, and <alternate> may be arbitrary expressions.

Semantics: An ‘if’ expression is evaluated as follows: first, <test> is evaluated. If it yields a true value (see section see Booleans), then <consequent> is evaluated and its value(s) is(are) returned. Otherwise <alternate> is evaluated and its value(s) is(are) returned. If <test> yields a false value and no <alternate> is specified, then the result of the expression is unspecified.

(if (> 3 2) 'yes 'no)                  ==>  yes
(if (> 2 3) 'yes 'no)                  ==>  no
(if (> 3 2)
    (- 3 2)
    (+ 3 2))                           ==>  1


Previous: , Up: Primitive expression types   [Contents][Index]

4.1.6 Assignments

syntax: set! <variable> <expression>

<Expression> is evaluated, and the resulting value is stored in the location to which <variable> is bound. <Variable> must be bound either in some region enclosing the ‘set!’ expression or at top level. The result of the ‘set!’ expression is unspecified.

(define x 2)
(+ x 1)                                ==>  3
(set! x 4)                             ==>  unspecified
(+ x 1)                                ==>  5


Next: , Previous: , Up: Expressions   [Contents][Index]

4.2 Derived expression types

The constructs in this section are hygienic, as discussed in section Macros. For reference purposes, section Derived expression type gives macro definitions that will convert most of the constructs described in this section into the primitive constructs described in the previous section.


Next: , Previous: , Up: Derived expression types   [Contents][Index]

4.2.1 Conditionals

library syntax: cond <clause1> <clause2> …,

Syntax: Each <clause> should be of the form

(<test> <expression1> …,)

where <test> is any expression. Alternatively, a <clause> may be of the form

(<test> => <expression>)

The last <clause> may be an “else clause,” which has the form

(else <expression1> <expression2> …,).

Semantics: A ‘cond’ expression is evaluated by evaluating the <test> expressions of successive <clause>s in order until one of them evaluates to a true value (see section see Booleans). When a <test> evaluates to a true value, then the remaining <expression>s in its <clause> are evaluated in order, and the result(s) of the last <expression> in the <clause> is(are) returned as the result(s) of the entire ‘cond’ expression. If the selected <clause> contains only the <test> and no <expression>s, then the value of the <test> is returned as the result. If the selected <clause> uses the => alternate form, then the <expression> is evaluated. Its value must be a procedure that accepts one argument; this procedure is then called on the value of the <test> and the value(s) returned by this procedure is(are) returned by the ‘cond’ expression. If all <test>s evaluate to false values, and there is no else clause, then the result of the conditional expression is unspecified; if there is an else clause, then its <expression>s are evaluated, and the value(s) of the last one is(are) returned.

(cond ((> 3 2) 'greater)
      ((< 3 2) 'less))                 ==>  greater

(cond ((> 3 3) 'greater)
      ((< 3 3) 'less)
      (else 'equal))                   ==>  equal

(cond ((assv 'b '((a 1) (b 2))) => cadr)
      (else #f))                       ==>  2

library syntax: case <key> <clause1> <clause2> …,

Syntax: <Key> may be any expression. Each <clause> should have the form

((<datum1> …,) <expression1> <expression2> …,),

where each <datum> is an external representation of some object. All the <datum>s must be distinct. The last <clause> may be an “else clause,” which has the form

(else <expression1> <expression2> …,).

Semantics: A ‘case’ expression is evaluated as follows. <Key> is evaluated and its result is compared against each <datum>. If the result of evaluating <key> is equivalent (in the sense of ‘eqv?’; see section see Equivalence predicates) to a <datum>, then the expressions in the corresponding <clause> are evaluated from left to right and the result(s) of the last expression in the <clause> is(are) returned as the result(s) of the ‘case’ expression. If the result of evaluating <key> is different from every <datum>, then if there is an else clause its expressions are evaluated and the result(s) of the last is(are) the result(s) of the ‘case’ expression; otherwise the result of the ‘case’ expression is unspecified.

(case (* 2 3)
  ((2 3 5 7) 'prime)
  ((1 4 6 8 9) 'composite))            ==>  composite
(case (car '(c d))
  ((a) 'a)
  ((b) 'b))                            ==>  unspecified
(case (car '(c d))
  ((a e i o u) 'vowel)
  ((w y) 'semivowel)
  (else 'consonant))                   ==>  consonant

library syntax: and <test1> …,

The <test> expressions are evaluated from left to right, and the value of the first expression that evaluates to a false value (see section see Booleans) is returned. Any remaining expressions are not evaluated. If all the expressions evaluate to true values, the value of the last expression is returned. If there are no expressions then #t is returned.

(and (= 2 2) (> 2 1))                  ==>  #t
(and (= 2 2) (< 2 1))                  ==>  #f
(and 1 2 'c '(f g))                    ==>  (f g)
(and)                                  ==>  #t

library syntax: or <test1> …,

The <test> expressions are evaluated from left to right, and the value of the first expression that evaluates to a true value (see section see Booleans) is returned. Any remaining expressions are not evaluated. If all expressions evaluate to false values, the value of the last expression is returned. If there are no expressions then #f is returned.

(or (= 2 2) (> 2 1))                   ==>  #t
(or (= 2 2) (< 2 1))                   ==>  #t
(or #f #f #f)                          ==>  #f
(or (memq 'b '(a b c)) 
    (/ 3 0))                           ==>  (b c)


Next: , Previous: , Up: Derived expression types   [Contents][Index]

4.2.2 Binding constructs

The three binding constructs ‘let’, ‘let*’, and ‘letrec’ give Scheme a block structure, like Algol 60. The syntax of the three constructs is identical, but they differ in the regions they establish for their variable bindings. In a ‘let’ expression, the initial values are computed before any of the variables become bound; in a ‘let*’ expression, the bindings and evaluations are performed sequentially; while in a ‘letrec’ expression, all the bindings are in effect while their initial values are being computed, thus allowing mutually recursive definitions.

library syntax: let <bindings> <body>

Syntax: <Bindings> should have the form

((<variable1> <init1>) …,),

where each <init> is an expression, and <body> should be a sequence of one or more expressions. It is an error for a <variable> to appear more than once in the list of variables being bound.

Semantics: The <init>s are evaluated in the current environment (in some unspecified order), the <variable>s are bound to fresh locations holding the results, the <body> is evaluated in the extended environment, and the value(s) of the last expression of <body> is(are) returned. Each binding of a <variable> has <body> as its region.

(let ((x 2) (y 3))
  (* x y))                             ==>  6

(let ((x 2) (y 3))
  (let ((x 7)
        (z (+ x y)))
    (* z x)))                          ==>  35

See also named ‘let’, section Iteration.

library syntax: let* <bindings> <body>

Syntax: <Bindings> should have the form

((<variable1> <init1>) …,),

and <body> should be a sequence of one or more expressions.

Semantics:Let*’ is similar to ‘let’, but the bindings are performed sequentially from left to right, and the region of a binding indicated by ‘(<variable> <init>)’ is that part of the ‘let*’ expression to the right of the binding. Thus the second binding is done in an environment in which the first binding is visible, and so on.

(let ((x 2) (y 3))
  (let* ((x 7)
         (z (+ x y)))
    (* z x)))                          ==>  70

library syntax: letrec <bindings> <body>

Syntax: <Bindings> should have the form

((<variable1> <init1>) …,),

and <body> should be a sequence of one or more expressions. It is an error for a <variable> to appear more than once in the list of variables being bound.

Semantics: The <variable>s are bound to fresh locations holding undefined values, the <init>s are evaluated in the resulting environment (in some unspecified order), each <variable> is assigned to the result of the corresponding <init>, the <body> is evaluated in the resulting environment, and the value(s) of the last expression in <body> is(are) returned. Each binding of a <variable> has the entire ‘letrec’ expression as its region, making it possible to define mutually recursive procedures.

(letrec ((even?
          (lambda (n)
            (if (zero? n)
                #t
                (odd? (- n 1)))))
         (odd?
          (lambda (n)
            (if (zero? n)
                #f
                (even? (- n 1))))))
  (even? 88))   
                                       ==>  #t

One restriction on ‘letrec’ is very important: it must be possible to evaluate each <init> without assigning or referring to the value of any <variable>. If this restriction is violated, then it is an error. The restriction is necessary because Scheme passes arguments by value rather than by name. In the most common uses of ‘letrec’, all the <init>s are lambda expressions and the restriction is satisfied automatically.


Next: , Previous: , Up: Derived expression types   [Contents][Index]

4.2.3 Sequencing

library syntax: begin <expression1> <expression2> …,

The <expression>s are evaluated sequentially from left to right, and the value(s) of the last <expression> is(are) returned. This expression type is used to sequence side effects such as input and output.

(define x 0)

(begin (set! x 5)
       (+ x 1))                        ==>  6

(begin (display "4 plus 1 equals ")
       (display (+ 4 1)))              ==>  unspecified
          and prints  4 plus 1 equals 5


Next: , Previous: , Up: Derived expression types   [Contents][Index]

4.2.4 Iteration

library syntax: do ((<variable1> <init1> <step1>) …) (<test> <expression> …) <command>

Do’ is an iteration construct. It specifies a set of variables to be bound, how they are to be initialized at the start, and how they are to be updated on each iteration. When a termination condition is met, the loop exits after evaluating the <expression>s.

Do’ expressions are evaluated as follows: The <init> expressions are evaluated (in some unspecified order), the <variable>s are bound to fresh locations, the results of the <init> expressions are stored in the bindings of the <variable>s, and then the iteration phase begins.

Each iteration begins by evaluating <test>; if the result is false (see section see Booleans), then the <command> expressions are evaluated in order for effect, the <step> expressions are evaluated in some unspecified order, the <variable>s are bound to fresh locations, the results of the <step>s are stored in the bindings of the <variable>s, and the next iteration begins.

If <test> evaluates to a true value, then the <expression>s are evaluated from left to right and the value(s) of the last <expression> is(are) returned. If no <expression>s are present, then the value of the ‘do’ expression is unspecified.

The region of the binding of a <variable> consists of the entire ‘do’ expression except for the <init>s. It is an error for a <variable> to appear more than once in the list of ‘do’ variables.

A <step> may be omitted, in which case the effect is the same as if ‘(<variable> <init> <variable>)’ had been written instead of ‘(<variable> <init>)’.

(do ((vec (make-vector 5))
     (i 0 (+ i 1)))
    ((= i 5) vec)
  (vector-set! vec i i))               ==>  #(0 1 2 3 4)

(let ((x '(1 3 5 7 9)))
  (do ((x x (cdr x))
       (sum 0 (+ sum (car x))))
      ((null? x) sum)))                ==>  25

library syntax: let <variable> <bindings> <body>

“Named ‘let’” is a variant on the syntax of let which provides a more general looping construct than ‘do’ and may also be used to express recursions. It has the same syntax and semantics as ordinary ‘let’ except that <variable> is bound within <body> to a procedure whose formal arguments are the bound variables and whose body is <body>. Thus the execution of <body> may be repeated by invoking the procedure named by <variable>.

(let loop ((numbers '(3 -2 1 6 -5))
           (nonneg '())
           (neg '()))
  (cond ((null? numbers) (list nonneg neg))
        ((>= (car numbers) 0)
         (loop (cdr numbers)
               (cons (car numbers) nonneg)
               neg))
        ((< (car numbers) 0)
         (loop (cdr numbers)
               nonneg
               (cons (car numbers) neg)))))   
          ==>  ((6 1 3) (-5 -2))


Next: , Previous: , Up: Derived expression types   [Contents][Index]

4.2.5 Delayed evaluation

library syntax: delay <expression>

The ‘delay’ construct is used together with the procedure force to implement lazy evaluation or call by need. (delay <expression>) returns an object called a promise which at some point in the future may be asked (by the ‘force’ procedure) to evaluate <expression>, and deliver the resulting value. The effect of <expression> returning multiple values is unspecified.

See the description of ‘force’ (section see Control features) for a more complete description of ‘delay’.


Previous: , Up: Derived expression types   [Contents][Index]

4.2.6 Quasiquotation

syntax: quasiquote <qq template>
syntax: `<qq template>

“Backquote” or “quasiquote” expressions are useful for constructing a list or vector structure when most but not all of the desired structure is known in advance. If no commas appear within the <qq template>, the result of evaluating `<qq template> is equivalent to the result of evaluating '<qq template>. If a comma appears within the <qq template>, however, the expression following the comma is evaluated (“unquoted”) and its result is inserted into the structure instead of the comma and the expression. If a comma appears followed immediately by an at-sign (@), then the following expression must evaluate to a list; the opening and closing parentheses of the list are then “stripped away” and the elements of the list are inserted in place of the comma at-sign expression sequence. A comma at-sign should only appear within a list or vector <qq template>.

`(list ,(+ 1 2) 4)                     ==>  (list 3 4)
(let ((name 'a)) `(list ,name ',name))           
          ==>  (list a (quote a))
`(a ,(+ 1 2) ,@(map abs '(4 -5 6)) b)           
          ==>  (a 3 4 5 6 b)
`((‘foo’ ,(- 10 3)) ,@(cdr '(c)) . ,(car '(cons)))           
          ==>  ((foo 7) . cons)
`#(10 5 ,(sqrt 4) ,@(map sqrt '(16 9)) 8)           
          ==>  #(10 5 2 4 3 8)

Quasiquote forms may be nested. Substitutions are made only for unquoted components appearing at the same nesting level as the outermost backquote. The nesting level increases by one inside each successive quasiquotation, and decreases by one inside each unquotation.

`(a `(b ,(+ 1 2) ,(foo ,(+ 1 3) d) e) f)           
          ==>  (a `(b ,(+ 1 2) ,(foo 4 d) e) f)
(let ((name1 'x)
      (name2 'y))
  `(a `(b ,,name1 ,',name2 d) e))           
          ==>  (a `(b ,x ,'y d) e)

The two notations `<qq template> and (quasiquote <qq template>) are identical in all respects. ‘,<expression>’ is identical to ‘(unquote <expression>)’, and ‘,@<expression>’ is identical to ‘(unquote-splicing <expression>)’. The external syntax generated by write for two-element lists whose car is one of these symbols may vary between implementations.

(quasiquote (list (unquote (+ 1 2)) 4))           
          ==>  (list 3 4)
'(quasiquote (list (unquote (+ 1 2)) 4))           
          ==>  `(list ,(+ 1 2) 4)
     i.e., (quasiquote (list (unquote (+ 1 2)) 4))

Unpredictable behavior can result if any of the symbols quasiquote, unquote, or unquote-splicing appear in positions within a <qq template> otherwise than as described above.


Previous: , Up: Expressions   [Contents][Index]

4.3 Macros

Scheme programs can define and use new derived expression types, called macros. Program-defined expression types have the syntax


(<keyword> <datum> ...)

where <keyword> is an identifier that uniquely determines the expression type. This identifier is called the syntactic keyword, or simply keyword, of the macro. The number of the <datum>s, and their syntax, depends on the expression type.

Each instance of a macro is called a use of the macro. The set of rules that specifies how a use of a macro is transcribed into a more primitive expression is called the transformer of the macro.

The macro definition facility consists of two parts:

The syntactic keyword of a macro may shadow variable bindings, and local variable bindings may shadow keyword bindings. All macros defined using the pattern language are “hygienic” and “referentially transparent” and thus preserve Scheme’s lexical scoping [Kohlbecker86], [ hygienic], [Bawden88], [macrosthatwork], [syntacticabstraction]:


Next: , Previous: , Up: Macros   [Contents][Index]

4.3.1 Binding constructs for syntactic keywords

Let-syntax’ and ‘letrec-syntax’ are analogous to ‘let’ and ‘letrec’, but they bind syntactic keywords to macro transformers instead of binding variables to locations that contain values. Syntactic keywords may also be bound at top level; see section Syntax definitions.

syntax: let-syntax <bindings> <body>

Syntax: <Bindings> should have the form

((<keyword> <transformer spec>) …,)

Each <keyword> is an identifier, each <transformer spec> is an instance of ‘syntax-rules’, and <body> should be a sequence of one or more expressions. It is an error for a <keyword> to appear more than once in the list of keywords being bound.

Semantics: The <body> is expanded in the syntactic environment obtained by extending the syntactic environment of the ‘let-syntax’ expression with macros whose keywords are the <keyword>s, bound to the specified transformers. Each binding of a <keyword> has <body> as its region.

(let-syntax ((when (syntax-rules ()
                     ((when test stmt1 stmt2 ...)
                      (if test
                          (begin stmt1
                                 stmt2 ...))))))
  (let ((if #t))
    (when if (set! if 'now))
    if))                               ==>  now

(let ((x 'outer))
  (let-syntax ((m (syntax-rules () ((m) x))))
    (let ((x 'inner))
      (m))))                           ==>  outer

syntax: letrec-syntax <bindings> <body>

Syntax: Same as for ‘let-syntax’.

Semantics: The <body> is expanded in the syntactic environment obtained by extending the syntactic environment of the ‘letrec-syntax’ expression with macros whose keywords are the <keyword>s, bound to the specified transformers. Each binding of a <keyword> has the <bindings> as well as the <body> within its region, so the transformers can transcribe expressions into uses of the macros introduced by the ‘letrec-syntax’ expression.

(letrec-syntax
  ((my-or (syntax-rules ()
            ((my-or) #f)
            ((my-or e) e)
            ((my-or e1 e2 ...)
             (let ((temp e1))
               (if temp
                   temp
                   (my-or e2 ...)))))))
  (let ((x #f)
        (y 7)
        (temp 8)
        (let odd?)
        (if even?))
    (my-or x
           (let temp)
           (if y)
           y)))                        ==>  7


Previous: , Up: Macros   [Contents][Index]

4.3.2 Pattern language

A <transformer spec> has the following form:

: syntax-rules <literals> <syntax rule> …,

Syntax: <Literals> is a list of identifiers and each <syntax rule> should be of the form

(<pattern> <template>)

The <pattern> in a <syntax rule> is a list <pattern> that begins with the keyword for the macro.

A <pattern> is either an identifier, a constant, or one of the following

(<pattern> …)
(<pattern> <pattern> … . <pattern>)
(<pattern><pattern> <ellipsis>)
#(<pattern> …)
#(<pattern><pattern> <ellipsis>)

and a template is either an identifier, a constant, or one of the following

(<element> …)
(<element> <element> … . <template>)
#(<element> …)

where an <element> is a <template> optionally followed by an <ellipsis> and an <ellipsis> is the identifier “‘...’” (which cannot be used as an identifier in either a template or a pattern).

Semantics: An instance of ‘syntax-rules’ produces a new macro transformer by specifying a sequence of hygienic rewrite rules. A use of a macro whose keyword is associated with a transformer specified by ‘syntax-rules’ is matched against the patterns contained in the <syntax rule>s, beginning with the leftmost <syntax rule>. When a match is found, the macro use is transcribed hygienically according to the template.

An identifier that appears in the pattern of a <syntax rule> is a pattern variable, unless it is the keyword that begins the pattern, is listed in <literals>, or is the identifier “‘...’”. Pattern variables match arbitrary input elements and are used to refer to elements of the input in the template. It is an error for the same pattern variable to appear more than once in a <pattern>.

The keyword at the beginning of the pattern in a <syntax rule> is not involved in the matching and is not considered a pattern variable or literal identifier.

Rationale: The scope of the keyword is determined by the expression or syntax definition that binds it to the associated macro transformer. If the keyword were a pattern variable or literal identifier, then the template that follows the pattern would be within its scope regardless of whether the keyword were bound by ‘let-syntax’ or by ‘letrec-syntax’.

Identifiers that appear in <literals> are interpreted as literal identifiers to be matched against corresponding subforms of the input. A subform in the input matches a literal identifier if and only if it is an identifier and either both its occurrence in the macro expression and its occurrence in the macro definition have the same lexical binding, or the two identifiers are equal and both have no lexical binding.

A subpattern followed by ‘...’ can match zero or more elements of the input. It is an error for ‘...’ to appear in <literals>. Within a pattern the identifier ‘...’ must follow the last element of a nonempty sequence of subpatterns.

More formally, an input form F matches a pattern P if and only if:

It is an error to use a macro keyword, within the scope of its binding, in an expression that does not match any of the patterns.

When a macro use is transcribed according to the template of the matching <syntax rule>, pattern variables that occur in the template are replaced by the subforms they match in the input. Pattern variables that occur in subpatterns followed by one or more instances of the identifier ‘...’ are allowed only in subtemplates that are followed by as many instances of ‘...’. They are replaced in the output by all of the subforms they match in the input, distributed as indicated. It is an error if the output cannot be built up as specified.

Identifiers that appear in the template but are not pattern variables or the identifier ‘...’ are inserted into the output as literal identifiers. If a literal identifier is inserted as a free identifier then it refers to the binding of that identifier within whose scope the instance of ‘syntax-rules’ appears. If a literal identifier is inserted as a bound identifier then it is in effect renamed to prevent inadvertent captures of free identifiers.

As an example, if let and cond are defined as in section Derived expression type then they are hygienic (as required) and the following is not an error.

(let ((=> #f))
  (cond (#t => 'ok)))                  ==> ok

The macro transformer for ‘cond’ recognizes ‘=>’ as a local variable, and hence an expression, and not as the top-level identifier ‘=>’, which the macro transformer treats as a syntactic keyword. Thus the example expands into

(let ((=> #f))
  (if #t (begin => 'ok)))

instead of

(let ((=> #f))
  (let ((temp #t))
    (if temp ('ok temp))))

which would result in an invalid procedure call.


Next: , Previous: , Up: top   [Contents][Index]

5 Program structure


Next: , Previous: , Up: Program structure   [Contents][Index]

5.1 Programs

A Scheme program consists of a sequence of expressions, definitions, and syntax definitions. Expressions are described in chapter Expressions; definitions and syntax definitions are the subject of the rest of the present chapter.

Programs are typically stored in files or entered interactively to a running Scheme system, although other paradigms are possible; questions of user interface lie outside the scope of this report. (Indeed, Scheme would still be useful as a notation for expressing computational methods even in the absence of a mechanical implementation.)

Definitions and syntax definitions occurring at the top level of a program can be interpreted declaratively. They cause bindings to be created in the top level environment or modify the value of existing top-level bindings. Expressions occurring at the top level of a program are interpreted imperatively; they are executed in order when the program is invoked or loaded, and typically perform some kind of initialization.

At the top level of a program (begin <form1> …,) is equivalent to the sequence of expressions, definitions, and syntax definitions that form the body of the begin.


Next: , Previous: , Up: Program structure   [Contents][Index]

5.2 Definitions

Definitions are valid in some, but not all, contexts where expressions are allowed. They are valid only at the top level of a <program> and at the beginning of a <body>.

A definition should have one of the following forms:


Next: , Previous: , Up: Definitions   [Contents][Index]

5.2.1 Top level definitions

At the top level of a program, a definition


(define <variable> <expression>)

has essentially the same effect as the assignment expression


(set! <variable> <expression>)

if <variable> is bound. If <variable> is not bound, however, then the definition will bind <variable> to a new location before performing the assignment, whereas it would be an error to perform a ‘set!’ on an unbound variable.


(define add3
  (lambda (x) (+ x 3)))
(add3 3)                               ==>  6
(define first car)
(first '(1 2))                         ==>  1

Some implementations of Scheme use an initial environment in which all possible variables are bound to locations, most of which contain undefined values. Top level definitions in such an implementation are truly equivalent to assignments.


Previous: , Up: Definitions   [Contents][Index]

5.2.2 Internal definitions

Definitions may occur at the beginning of a <body> (that is, the body of a lambda, let, let*, letrec, let-syntax, or letrec-syntax expression or that of a definition of an appropriate form). Such definitions are known as internal definitions as opposed to the top level definitions described above. The variable defined by an internal definition is local to the <body>. That is, <variable> is bound rather than assigned, and the region of the binding is the entire <body>. For example,


(let ((x 5))
  (define foo (lambda (y) (bar x y)))
  (define bar (lambda (a b) (+ (* a b) a)))
  (foo (+ x 3)))                       ==>  45

A <body> containing internal definitions can always be converted into a completely equivalent ‘letrec’ expression. For example, the ‘let’ expression in the above example is equivalent to


(let ((x 5))
  (letrec ((foo (lambda (y) (bar x y)))
           (bar (lambda (a b) (+ (* a b) a))))
    (foo (+ x 3))))

Just as for the equivalent ‘letrec’ expression, it must be possible to evaluate each <expression> of every internal definition in a <body> without assigning or referring to the value of any <variable> being defined.

Wherever an internal definition may occur (begin <definition1> …,) is equivalent to the sequence of definitions that form the body of the begin.


Previous: , Up: Program structure   [Contents][Index]

5.3 Syntax definitions

Syntax definitions are valid only at the top level of a <program>.

They have the following form:

(define-syntax <keyword> <transformer spec>)

<Keyword> is an identifier, and the <transformer spec> should be an instance of syntax-rules. The top-level syntactic environment is extended by binding the <keyword> to the specified transformer.

There is no ‘define-syntax’ analogue of internal definitions.

Although macros may expand into definitions and syntax definitions in any context that permits them, it is an error for a definition or syntax definition to shadow a syntactic keyword whose meaning is needed to determine whether some form in the group of forms that contains the shadowing definition is in fact a definition, or, for internal definitions, is needed to determine the boundary between the group and the expressions that follow the group. For example, the following are errors:


(define define 3)

(begin (define begin list))

(let-syntax
  ((foo (syntax-rules ()
          ((foo (proc args ...) body ...)
           (define proc
             (lambda (args ...)
               body ...))))))
  (let ((x 3))
    (foo (plus x y) (+ x y))
    (define foo x)
    (plus foo x)))


Next: , Previous: , Up: top   [Contents][Index]

6 Standard procedures

This chapter describes Scheme’s built-in procedures. The initial (or “top level”) Scheme environment starts out with a number of variables bound to locations containing useful values, most of which are primitive procedures that manipulate data. For example, the variable ‘abs’ is bound to (a location initially containing) a procedure of one argument that computes the absolute value of a number, and the variable ‘+’ is bound to a procedure that computes sums. Built-in procedures that can easily be written in terms of other built-in procedures are identified as “library procedures”.

A program may use a top-level definition to bind any variable. It may subsequently alter any such binding by an assignment (see see Assignments). These operations do not modify the behavior of Scheme’s built-in procedures. Altering any top-level binding that has not been introduced by a definition has an unspecified effect on the behavior of the built-in procedures.


Next: , Previous: , Up: Standard procedures   [Contents][Index]

6.1 Equivalence predicates

A predicate is a procedure that always returns a boolean value (#t or #f). An equivalence predicate is the computational analogue of a mathematical equivalence relation (it is symmetric, reflexive, and transitive). Of the equivalence predicates described in this section, ‘eq?’ is the finest or most discriminating, and ‘equal?’ is the coarsest. ‘Eqv?’ is slightly less discriminating than ‘eq?’.

procedure: eqv? obj1 obj2

The ‘eqv?’ procedure defines a useful equivalence relation on objects. Briefly, it returns #t if obj1 and obj2 should normally be regarded as the same object. This relation is left slightly open to interpretation, but the following partial specification of ‘eqv?’ holds for all implementations of Scheme.

The ‘eqv?’ procedure returns #t if:

The ‘eqv?’ procedure returns #f if:

(eqv? 'a 'a)                           ==>  #t
(eqv? 'a 'b)                           ==>  #f
(eqv? 2 2)                             ==>  #t
(eqv? '() '())                         ==>  #t
(eqv? 100000000 100000000)             ==>  #t
(eqv? (cons 1 2) (cons 1 2))           ==>  #f
(eqv? (lambda () 1)
      (lambda () 2))                   ==>  #f
(eqv? #f 'nil)                         ==>  #f
(let ((p (lambda (x) x)))
  (eqv? p p))                          ==>  #t

The following examples illustrate cases in which the above rules do not fully specify the behavior of ‘eqv?’. All that can be said about such cases is that the value returned by ‘eqv?’ must be a boolean.

(eqv? "" "")                           ==>  unspecified
(eqv? '#() '#())                       ==>  unspecified
(eqv? (lambda (x) x)
      (lambda (x) x))                  ==>  unspecified
(eqv? (lambda (x) x)
      (lambda (y) y))                  ==>  unspecified

The next set of examples shows the use of ‘eqv?’ with procedures that have local state. ‘Gen-counter’ must return a distinct procedure every time, since each procedure has its own internal counter. ‘Gen-loser’, however, returns equivalent procedures each time, since the local state does not affect the value or side effects of the procedures.

(define gen-counter
  (lambda ()
    (let ((n 0))
      (lambda () (set! n (+ n 1)) n))))
(let ((g (gen-counter)))
  (eqv? g g))                          ==>  #t
(eqv? (gen-counter) (gen-counter))
                                       ==>  #f
(define gen-loser
  (lambda ()
    (let ((n 0))
      (lambda () (set! n (+ n 1)) 27))))
(let ((g (gen-loser)))
  (eqv? g g))                          ==>  #t
(eqv? (gen-loser) (gen-loser))
                                       ==>  unspecified

(letrec ((f (lambda () (if (eqv? f g) 'both 'f)))
         (g (lambda () (if (eqv? f g) 'both 'g))))
  (eqv? f g))
                                       ==>  unspecified

(letrec ((f (lambda () (if (eqv? f g) 'f 'both)))
         (g (lambda () (if (eqv? f g) 'g 'both))))
  (eqv? f g))
                                       ==>  #f

Since it is an error to modify constant objects (those returned by literal expressions), implementations are permitted, though not required, to share structure between constants where appropriate. Thus the value of ‘eqv?’ on constants is sometimes implementation-dependent.

(eqv? '(a) '(a))                       ==>  unspecified
(eqv? "a" "a")                         ==>  unspecified
(eqv? '(b) (cdr '(a b)))               ==>  unspecified
(let ((x '(a)))
  (eqv? x x))                          ==>  #t

Rationale: The above definition of ‘eqv?’ allows implementations latitude in their treatment of procedures and literals: implementations are free either to detect or to fail to detect that two procedures or two literals are equivalent to each other, and can decide whether or not to merge representations of equivalent objects by using the same pointer or bit pattern to represent both.

procedure: eq? obj1 obj2

Eq?’ is similar to ‘eqv?’ except that in some cases it is capable of discerning distinctions finer than those detectable by ‘eqv?’.

Eq?’ and ‘eqv?’ are guaranteed to have the same behavior on symbols, booleans, the empty list, pairs, procedures, and non-empty strings and vectors. ‘Eq?’’s behavior on numbers and characters is implementation-dependent, but it will always return either true or false, and will return true only when ‘eqv?’ would also return true. ‘Eq?’ may also behave differently from ‘eqv?’ on empty vectors and empty strings.

(eq? 'a 'a)                            ==>  #t
(eq? '(a) '(a))                        ==>  unspecified
(eq? (list 'a) (list 'a))              ==>  #f
(eq? "a" "a")                          ==>  unspecified
(eq? "" "")                            ==>  unspecified
(eq? '() '())                          ==>  #t
(eq? 2 2)                              ==>  unspecified
(eq? #\A #\A)                          ==>  unspecified
(eq? car car)                          ==>  #t
(let ((n (+ 2 3)))
  (eq? n n))                           ==>  unspecified
(let ((x '(a)))
  (eq? x x))                           ==>  #t
(let ((x '#()))
  (eq? x x))                           ==>  #t
(let ((p (lambda (x) x)))
  (eq? p p))                           ==>  #t

Rationale: It will usually be possible to implement ‘eq?’ much more efficiently than ‘eqv?’, for example, as a simple pointer comparison instead of as some more complicated operation. One reason is that it may not be possible to compute ‘eqv?’ of two numbers in constant time, whereas ‘eq?’ implemented as pointer comparison will always finish in constant time. ‘Eq?’ may be used like ‘eqv?’ in applications using procedures to implement objects with state since it obeys the same constraints as ‘eqv?’.

library procedure: equal? obj1 obj2

Equal?’ recursively compares the contents of pairs, vectors, and strings, applying ‘eqv?’ on other objects such as numbers and symbols. A rule of thumb is that objects are generally ‘equal?’ if they print the same. ‘Equal?’ may fail to terminate if its arguments are circular data structures.

(equal? 'a 'a)                         ==>  #t
(equal? '(a) '(a))                     ==>  #t
(equal? '(a (b) c)
        '(a (b) c))                    ==>  #t
(equal? "abc" "abc")                   ==>  #t
(equal? 2 2)                           ==>  #t
(equal? (make-vector 5 'a)
        (make-vector 5 'a))            ==>  #t
(equal? (lambda (x) x)
        (lambda (y) y))                ==>  unspecified


Next: , Previous: , Up: Standard procedures   [Contents][Index]

6.2 Numbers

Numerical computation has traditionally been neglected by the Lisp community. Until Common Lisp there was no carefully thought out strategy for organizing numerical computation, and with the exception of the MacLisp system [Pitman83] little effort was made to execute numerical code efficiently. This report recognizes the excellent work of the Common Lisp committee and accepts many of their recommendations. In some ways this report simplifies and generalizes their proposals in a manner consistent with the purposes of Scheme.

It is important to distinguish between the mathematical numbers, the Scheme numbers that attempt to model them, the machine representations used to implement the Scheme numbers, and notations used to write numbers. This report uses the types number, complex, real, rational, and integer to refer to both mathematical numbers and Scheme numbers. Machine representations such as fixed point and floating point are referred to by names such as fixnum and flonum.


Next: , Previous: , Up: Numbers   [Contents][Index]

6.2.1 Numerical types

Mathematically, numbers may be arranged into a tower of subtypes in which each level is a subset of the level above it:

         number 
          complex 
          real 
          rational 
          integer 

For example, 3 is an integer. Therefore 3 is also a rational, a real, and a complex. The same is true of the Scheme numbers that model 3. For Scheme numbers, these types are defined by the predicates number?, complex?, real?, rational?, and integer?.

There is no simple relationship between a number’s type and its representation inside a computer. Although most implementations of Scheme will offer at least two different representations of 3, these different representations denote the same integer.

Scheme’s numerical operations treat numbers as abstract data, as independent of their representation as possible. Although an implementation of Scheme may use fixnum, flonum, and perhaps other representations for numbers, this should not be apparent to a casual programmer writing simple programs.

It is necessary, however, to distinguish between numbers that are represented exactly and those that may not be. For example, indexes into data structures must be known exactly, as must some polynomial coefficients in a symbolic algebra system. On the other hand, the results of measurements are inherently inexact, and irrational numbers may be approximated by rational and therefore inexact approximations. In order to catch uses of inexact numbers where exact numbers are required, Scheme explicitly distinguishes exact from inexact numbers. This distinction is orthogonal to the dimension of type.


Next: , Previous: , Up: Numbers   [Contents][Index]

6.2.2 Exactness

Scheme numbers are either exact or inexact. A number is exact if it was written as an exact constant or was derived from exact numbers using only exact operations. A number is inexact if it was written as an inexact constant, if it was derived using inexact ingredients, or if it was derived using inexact operations. Thus inexactness is a contagious property of a number.

If two implementations produce exact results for a computation that did not involve inexact intermediate results, the two ultimate results will be mathematically equivalent. This is generally not true of computations involving inexact numbers since approximate methods such as floating point arithmetic may be used, but it is the duty of each implementation to make the result as close as practical to the mathematically ideal result.

Rational operations such as ‘+’ should always produce exact results when given exact arguments. If the operation is unable to produce an exact result, then it may either report the violation of an implementation restriction or it may silently coerce its result to an inexact value. See section Implementation restrictions.

With the exception of inexact->exact, the operations described in this section must generally return inexact results when given any inexact arguments. An operation may, however, return an exact result if it can prove that the value of the result is unaffected by the inexactness of its arguments. For example, multiplication of any number by an exact zero may produce an exact zero result, even if the other argument is inexact.


Next: , Previous: , Up: Numbers   [Contents][Index]

6.2.3 Implementation restrictions

Implementations of Scheme are not required to implement the whole tower of subtypes given in section Numerical types, but they must implement a coherent subset consistent with both the purposes of the implementation and the spirit of the Scheme language. For example, an implementation in which all numbers are real may still be quite useful.

Implementations may also support only a limited range of numbers of any type, subject to the requirements of this section. The supported range for exact numbers of any type may be different from the supported range for inexact numbers of that type. For example, an implementation that uses flonums to represent all its inexact real numbers may support a practically unbounded range of exact integers and rationals while limiting the range of inexact reals (and therefore the range of inexact integers and rationals) to the dynamic range of the flonum format. Furthermore the gaps between the representable inexact integers and rationals are likely to be very large in such an implementation as the limits of this range are approached.

An implementation of Scheme must support exact integers throughout the range of numbers that may be used for indexes of lists, vectors, and strings or that may result from computing the length of a list, vector, or string. The length, vector-length, and string-length procedures must return an exact integer, and it is an error to use anything but an exact integer as an index. Furthermore any integer constant within the index range, if expressed by an exact integer syntax, will indeed be read as an exact integer, regardless of any implementation restrictions that may apply outside this range. Finally, the procedures listed below will always return an exact integer result provided all their arguments are exact integers and the mathematically expected result is representable as an exact integer within the implementation:


+            -             *
quotient     remainder     modulo
max          min           abs
numerator    denominator   gcd
lcm          floor         ceiling
truncate     round         rationalize
expt

Implementations are encouraged, but not required, to support exact integers and exact rationals of practically unlimited size and precision, and to implement the above procedures and the ‘/’ procedure in such a way that they always return exact results when given exact arguments. If one of these procedures is unable to deliver an exact result when given exact arguments, then it may either report a violation of an implementation restriction or it may silently coerce its result to an inexact number. Such a coercion may cause an error later.

An implementation may use floating point and other approximate representation strategies for inexact numbers.

This report recommends, but does not require, that the IEEE 32-bit and 64-bit floating point standards be followed by implementations that use flonum representations, and that implementations using other representations should match or exceed the precision achievable using these floating point standards [IEEE].

In particular, implementations that use flonum representations must follow these rules: A flonum result must be represented with at least as much precision as is used to express any of the inexact arguments to that operation. It is desirable (but not required) for potentially inexact operations such as ‘sqrt’, when applied to exact arguments, to produce exact answers whenever possible (for example the square root of an exact 4 ought to be an exact 2). If, however, an exact number is operated upon so as to produce an inexact result (as by ‘sqrt’), and if the result is represented as a flonum, then the most precise flonum format available must be used; but if the result is represented in some other way then the representation must have at least as much precision as the most precise flonum format available.

Although Scheme allows a variety of written notations for numbers, any particular implementation may support only some of them. For example, an implementation in which all numbers are real need not support the rectangular and polar notations for complex numbers. If an implementation encounters an exact numerical constant that it cannot represent as an exact number, then it may either report a violation of an implementation restriction or it may silently represent the constant by an inexact number.


Next: , Previous: , Up: Numbers   [Contents][Index]

6.2.4 Syntax of numerical constants

The syntax of the written representations for numbers is described formally in section Lexical structure. Note that case is not significant in numerical constants.

A number may be written in binary, octal, decimal, or hexadecimal by the use of a radix prefix. The radix prefixes are ‘#b’ (binary), ‘#o’ (octal), ‘#d’ (decimal), and ‘#x’ (hexadecimal). With no radix prefix, a number is assumed to be expressed in decimal.

A numerical constant may be specified to be either exact or inexact by a prefix. The prefixes are ‘#e for exact, and ‘#i’ for inexact. An exactness prefix may appear before or after any radix prefix that is used. If the written representation of a number has no exactness prefix, the constant may be either inexact or exact. It is inexact if it contains a decimal point, an exponent, or a “#” character in the place of a digit, otherwise it is exact.

In systems with inexact numbers of varying precisions it may be useful to specify the precision of a constant. For this purpose, numerical constants may be written with an exponent marker that indicates the desired precision of the inexact representation. The letters ‘s’, ‘f’, ‘d’, and ‘l’ specify the use of short, single, double, and long precision, respectively. (When fewer than four internal inexact representations exist, the four size specifications are mapped onto those available. For example, an implementation with two internal representations may map short and single together and long and double together.) In addition, the exponent marker ‘e’ specifies the default precision for the implementation. The default precision has at least as much precision as double, but implementations may wish to allow this default to be set by the user.


3.14159265358979F0
       Round to single — 3.141593
0.6L0
       Extend to long — .600000000000000


Next: , Previous: , Up: Numbers   [Contents][Index]

6.2.5 Numerical operations

The reader is referred to section Entry format for a summary of the naming conventions used to specify restrictions on the types of arguments to numerical routines.

The examples used in this section assume that any numerical constant written using an exact notation is indeed represented as an exact number. Some examples also assume that certain numerical constants written using an inexact notation can be represented without loss of accuracy; the inexact constants were chosen so that this is likely to be true in implementations that use flonums to represent inexact numbers.

procedure: number? obj
procedure: complex? obj
procedure: real? obj
procedure: rational? obj
procedure: integer? obj

These numerical type predicates can be applied to any kind of argument, including non-numbers. They return #t if the object is of the named type, and otherwise they return #f. In general, if a type predicate is true of a number then all higher type predicates are also true of that number. Consequently, if a type predicate is false of a number, then all lower type predicates are also false of that number.

If z is an inexact complex number, then ‘(real? z)’ is true if and only if ‘(zero? (imag-part z))’ is true. If x is an inexact real number, then ‘(integer? x)’ is true if and only if ‘(= x (round x))’.

(complex? 3+4i)                        ==>  #t
(complex? 3)                           ==>  #t
(real? 3)                              ==>  #t
(real? -2.5+0.0i)                      ==>  #t
(real? #e1e10)                         ==>  #t
(rational? 6/10)                       ==>  #t
(rational? 6/3)                        ==>  #t
(integer? 3+0i)                        ==>  #t
(integer? 3.0)                         ==>  #t
(integer? 8/4)                         ==>  #t

Note: The behavior of these type predicates on inexact numbers is unreliable, since any inaccuracy may affect the result.

Note: In many implementations the rational? procedure will be the same as real?, and the complex? procedure will be the same as number?, but unusual implementations may be able to represent some irrational numbers exactly or may extend the number system to support some kind of non-complex numbers.

procedure: exact? z
procedure: inexact? z

These numerical predicates provide tests for the exactness of a quantity. For any Scheme number, precisely one of these predicates is true.

procedure: = z1 z2 z3 …,
procedure: < x1 x2 x3 …,
procedure: > x1 x2 x3 …,
procedure: <= x1 x2 x3 …,
procedure: >= x1 x2 x3 …,

These procedures return #t if their arguments are (respectively): equal, monotonically increasing, monotonically decreasing, monotonically nondecreasing, or monotonically nonincreasing.

These predicates are required to be transitive.

Note: The traditional implementations of these predicates in Lisp-like languages are not transitive.

Note: While it is not an error to compare inexact numbers using these predicates, the results may be unreliable because a small inaccuracy may affect the result; this is especially true of = and zero?. When in doubt, consult a numerical analyst.

library procedure: zero? z
library procedure: positive? x
library procedure: negative? x
library procedure: odd? n
library procedure: even? n

These numerical predicates test a number for a particular property, returning #t or #f. See note above.

library procedure: max x1 x2 …,
library procedure: min x1 x2 …,

These procedures return the maximum or minimum of their arguments.

(max 3 4)                              ==>  4    ; exact
(max 3.9 4)                            ==>  4.0  ; inexact

Note: If any argument is inexact, then the result will also be inexact (unless the procedure can prove that the inaccuracy is not large enough to affect the result, which is possible only in unusual implementations). If ‘min’ or ‘max’ is used to compare numbers of mixed exactness, and the numerical value of the result cannot be represented as an inexact number without loss of accuracy, then the procedure may report a violation of an implementation restriction.

procedure: + z1 …,
procedure: * z1 …,

These procedures return the sum or product of their arguments.

(+ 3 4)                                ==>  7
(+ 3)                                  ==>  3
(+)                                    ==>  0
(* 4)                                  ==>  4
(*)                                    ==>  1

procedure: - z1 z2
procedure: - z
optional procedure: - z1 z2 …,
procedure: / z1 z2
procedure: / z
optional procedure: / z1 z2 …,

With two or more arguments, these procedures return the difference or quotient of their arguments, associating to the left. With one argument, however, they return the additive or multiplicative inverse of their argument.

(- 3 4)                                ==>  -1
(- 3 4 5)                              ==>  -6
(- 3)                                  ==>  -3
(/ 3 4 5)                              ==>  3/20
(/ 3)                                  ==>  1/3

library procedure: abs x

Abs’ returns the absolute value of its argument.

(abs -7)                               ==>  7

procedure: quotient n1 n2
procedure: remainder n1 n2
procedure: modulo n1 n2

These procedures implement number-theoretic (integer) division. n2 should be non-zero. All three procedures return integers. If n1/n2 is an integer:

    (quotient n1 n2)                   ==> n1/n2
    (remainder n1 n2)                  ==> 0
    (modulo n1 n2)                     ==> 0

If n1/n2 is not an integer:

    (quotient n1 n2)                   ==> n_q
    (remainder n1 n2)                  ==> n_r
    (modulo n1 n2)                     ==> n_m

where n_q is n1/n2 rounded towards zero, 0 < |n_r| < |n2|, 0 < |n_m| < |n2|, n_r and n_m differ from n1 by a multiple of n2, n_r has the same sign as n1, and n_m has the same sign as n2.

From this we can conclude that for integers n1 and n2 with n2 not equal to 0,

     (= n1 (+ (* n2 (quotient n1 n2))
           (remainder n1 n2)))
                                       ==>  #t

provided all numbers involved in that computation are exact.

(modulo 13 4)                          ==>  1
(remainder 13 4)                       ==>  1

(modulo -13 4)                         ==>  3
(remainder -13 4)                      ==>  -1

(modulo 13 -4)                         ==>  -3
(remainder 13 -4)                      ==>  1

(modulo -13 -4)                        ==>  -1
(remainder -13 -4)                     ==>  -1

(remainder -13 -4.0)                   ==>  -1.0  ; inexact

library procedure: gcd n1 …,
library procedure: lcm n1 …,

These procedures return the greatest common divisor or least common multiple of their arguments. The result is always non-negative.

(gcd 32 -36)                           ==>  4
(gcd)                                  ==>  0
(lcm 32 -36)                           ==>  288
(lcm 32.0 -36)                         ==>  288.0  ; inexact
(lcm)                                  ==>  1

procedure: numerator q
procedure: denominator q

These procedures return the numerator or denominator of their argument; the result is computed as if the argument was represented as a fraction in lowest terms. The denominator is always positive. The denominator of 0 is defined to be 1.

(numerator (/ 6 4))                    ==>  3
(denominator (/ 6 4))                  ==>  2
(denominator
  (exact->inexact (/ 6 4)))            ==> 2.0

procedure: floor x
procedure: ceiling x
procedure: truncate x
procedure: round x

These procedures return integers. ‘Floor’ returns the largest integer not larger than x. ‘Ceiling’ returns the smallest integer not smaller than x. ‘Truncate’ returns the integer closest to x whose absolute value is not larger than the absolute value of x. ‘Round’ returns the closest integer to x, rounding to even when x is halfway between two integers.

Rationale:Round’ rounds to even for consistency with the default rounding mode specified by the IEEE floating point standard.

Note: If the argument to one of these procedures is inexact, then the result will also be inexact. If an exact value is needed, the result should be passed to the ‘inexact->exact’ procedure.

(floor -4.3)                           ==>  -5.0
(ceiling -4.3)                         ==>  -4.0
(truncate -4.3)                        ==>  -4.0
(round -4.3)                           ==>  -4.0

(floor 3.5)                            ==>  3.0
(ceiling 3.5)                          ==>  4.0
(truncate 3.5)                         ==>  3.0
(round 3.5)                            ==>  4.0  ; inexact

(round 7/2)                            ==>  4    ; exact
(round 7)                              ==>  7

library procedure: rationalize x y

Rationalize’ returns the simplest rational number differing from x by no more than y. A rational number r_1 is simpler than another rational number r_2 if r_1 = p_1/q_1 and r_2 = p_2/q_2 (in lowest terms) and |p_1|<= |p_2| and |q_1| <= |q_2|. Thus 3/5 is simpler than 4/7. Although not all rationals are comparable in this ordering (consider 2/7 and 3/5) any interval contains a rational number that is simpler than every other rational number in that interval (the simpler 2/5 lies between 2/7 and 3/5). Note that 0 = 0/1 is the simplest rational of all.

(rationalize
  (inexact->exact .3) 1/10)            ==> 1/3    ; exact
(rationalize .3 1/10)                  ==> #i1/3  ; inexact

procedure: exp z
procedure: log z
procedure: sin z
procedure: cos z
procedure: tan z
procedure: asin z
procedure: acos z
procedure: atan z
procedure: atan y x

These procedures are part of every implementation that supports general real numbers; they compute the usual transcendental functions. ‘log’ computes the natural logarithm of z (not the base ten logarithm). ‘asin’, ‘acos’, and ‘atan’ compute arcsine (sin^-1), arccosine (cos^-1), and arctangent (tan^-1), respectively. The two-argument variant of ‘atan’ computes (angle (make-rectangular x y)) (see below), even in implementations that don’t support general complex numbers.

In general, the mathematical functions log, arcsine, arccosine, and arctangent are multiply defined. The value of log z is defined to be the one whose imaginary part lies in the range from -pi (exclusive) to pi (inclusive). log 0 is undefined. With log defined this way, the values of sin^-1 z, cos^-1 z, and tan^-1 z are according to the following formulae:

sin^-1 z = -i log (i z + sqrt(1 - z^2))
cos^-1 z = pi / 2 - sin^-1 z
tan^-1 z = (log (1 + i z) - log (1 - i z)) / (2 i)

The above specification follows [CLtL], which in turn cites [Penfield81]; refer to these sources for more detailed discussion of branch cuts, boundary conditions, and implementation of these functions. When it is possible these procedures produce a real result from a real argument.

procedure: sqrt z

Returns the principal square root of z. The result will have either positive real part, or zero real part and non-negative imaginary part.

procedure: expt z1 z2

Returns z1 raised to the power z2. For z_1 ~= 0

z_1^z_2 = e^z_2 log z_1

0^z is 1 if z = 0 and 0 otherwise.

procedure: make-rectangular x1 x2
procedure: make-polar x3 x4
procedure: real-part z
procedure: imag-part z
procedure: magnitude z
procedure: angle z

These procedures are part of every implementation that supports general complex numbers. Suppose x1, x2, x3, and x4 are real numbers and z is a complex number such that

z = x1 + x2i = x3 . e^i x4

Then

(make-rectangular x1 x2)               ==> z
(make-polar x3 x4)                     ==> z
(real-part z)                          ==> x1
(imag-part z)                          ==> x2
(magnitude z)                          ==> |x3|
(angle z)                              ==> x_angle

where -pi < x_angle <= pi with x_angle = x4 + 2pi n for some integer n.

Rationale:Magnitude’ is the same as abs for a real argument, but ‘abs’ must be present in all implementations, whereas ‘magnitude’ need only be present in implementations that support general complex numbers.

procedure: exact->inexact z
procedure: inexact->exact z

Exact->inexact’ returns an inexact representation of z. The value returned is the inexact number that is numerically closest to the argument. If an exact argument has no reasonably close inexact equivalent, then a violation of an implementation restriction may be reported.

Inexact->exact’ returns an exact representation of z. The value returned is the exact number that is numerically closest to the argument. If an inexact argument has no reasonably close exact equivalent, then a violation of an implementation restriction may be reported.

These procedures implement the natural one-to-one correspondence between exact and inexact integers throughout an implementation-dependent range. See section Implementation restrictions.





Previous: , Up: Numbers   [Contents][Index]

6.2.6 Numerical input and output

procedure: number->string z
procedure: number->string z radix

Radix must be an exact integer, either 2, 8, 10, or 16. If omitted, radix defaults to 10. The procedure ‘number->string’ takes a number and a radix and returns as a string an external representation of the given number in the given radix such that

(let ((number number)
      (radix radix))
  (eqv? number
        (string->number (number->string number
                                        radix)
                        radix)))

is true. It is an error if no possible result makes this expression true.

If z is inexact, the radix is 10, and the above expression can be satisfied by a result that contains a decimal point, then the result contains a decimal point and is expressed using the minimum number of digits (exclusive of exponent and trailing zeroes) needed to make the above expression true [howtoprint], [howtoread]; otherwise the format of the result is unspecified.

The result returned by ‘number->string’ never contains an explicit radix prefix.

Note: The error case can occur only when z is not a complex number or is a complex number with a non-rational real or imaginary part.

Rationale: If z is an inexact number represented using flonums, and the radix is 10, then the above expression is normally satisfied by a result containing a decimal point. The unspecified case allows for infinities, NaNs, and non-flonum representations.

procedure: string->number string
procedure: string->number string radix

Returns a number of the maximally precise representation expressed by the given string. Radix must be an exact integer, either 2, 8, 10, or 16. If supplied, radix is a default radix that may be overridden by an explicit radix prefix in string (e.g. "#o177"). If radix is not supplied, then the default radix is 10. If string is not a syntactically valid notation for a number, then ‘string->number’ returns #f.

(string->number "100")                 ==>  100
(string->number "100" 16)              ==>  256
(string->number "1e2")                 ==>  100.0
(string->number "15##")                ==>  1500.0

Note: The domain of ‘string->number’ may be restricted by implementations in the following ways. ‘String->number’ is permitted to return #f whenever string contains an explicit radix prefix. If all numbers supported by an implementation are real, then ‘string->number’ is permitted to return #f whenever string uses the polar or rectangular notations for complex numbers. If all numbers are integers, then ‘string->number’ may return #f whenever the fractional notation is used. If all numbers are exact, then ‘string->number’ may return #f whenever an exponent marker or explicit exactness prefix is used, or if a # appears in place of a digit. If all inexact numbers are integers, then ‘string->number’ may return #f whenever a decimal point is used.


Next: , Previous: , Up: Standard procedures   [Contents][Index]

6.3 Other data types

This section describes operations on some of Scheme’s non-numeric data types: booleans, pairs, lists, symbols, characters, strings and vectors.


Next: , Previous: , Up: Other data types   [Contents][Index]

6.3.1 Booleans

The standard boolean objects for true and false are written as #t and #f. What really matters, though, are the objects that the Scheme conditional expressions (‘if’, ‘cond’, ‘and’, ‘or’, ‘do’) treat as true or false. The phrase “a true value” (or sometimes just “true”) means any object treated as true by the conditional expressions, and the phrase “a false value” (or “false”) means any object treated as false by the conditional expressions.

Of all the standard Scheme values, only #f counts as false in conditional expressions. Except for #f, all standard Scheme values, including #t, pairs, the empty list, symbols, numbers, strings, vectors, and procedures, count as true.

Note: Programmers accustomed to other dialects of Lisp should be aware that Scheme distinguishes both #f and the empty list from the symbol nil.

Boolean constants evaluate to themselves, so they do not need to be quoted in programs.


#t                                     ==>  #t
#f                                     ==>  #f
'#f                                    ==>  #f

library procedure: not obj

Not’ returns #t if obj is false, and returns #f otherwise.

(not #t)                               ==>  #f
(not 3)                                ==>  #f
(not (list 3))                         ==>  #f
(not #f)                               ==>  #t
(not '())                              ==>  #f
(not (list))                           ==>  #f
(not 'nil)                             ==>  #f

library procedure: boolean? obj

Boolean?’ returns #t if obj is either #t or #f and returns #f otherwise.

(boolean? #f)                          ==>  #t
(boolean? 0)                           ==>  #f
(boolean? '())                         ==>  #f


Next: , Previous: , Up: Other data types   [Contents][Index]

6.3.2 Pairs and lists

A pair (sometimes called a dotted pair) is a record structure with two fields called the car and cdr fields (for historical reasons). Pairs are created by the procedure ‘cons’. The car and cdr fields are accessed by the procedures ‘car’ and ‘cdr’. The car and cdr fields are assigned by the procedures ‘set-car!’ and ‘set-cdr!’.

Pairs are used primarily to represent lists. A list can be defined recursively as either the empty list or a pair whose cdr is a list. More precisely, the set of lists is defined as the smallest set X such that

The objects in the car fields of successive pairs of a list are the elements of the list. For example, a two-element list is a pair whose car is the first element and whose cdr is a pair whose car is the second element and whose cdr is the empty list. The length of a list is the number of elements, which is the same as the number of pairs.

The empty list is a special object of its own type (it is not a pair); it has no elements and its length is zero.

Note: The above definitions imply that all lists have finite length and are terminated by the empty list.

The most general notation (external representation) for Scheme pairs is the “dotted” notation ‘(c1 . c2) where c1 is the value of the car field and c2 is the value of the cdr field. For example ‘(4 . 5)’ is a pair whose car is 4 and whose cdr is 5. Note that ‘(4 . 5)’ is the external representation of a pair, not an expression that evaluates to a pair.

A more streamlined notation can be used for lists: the elements of the list are simply enclosed in parentheses and separated by spaces. The empty list is written () . For example,


(a b c d e)

and


(a . (b . (c . (d . (e . ())))))

are equivalent notations for a list of symbols.

A chain of pairs not ending in the empty list is called an improper list. Note that an improper list is not a list. The list and dotted notations can be combined to represent improper lists:


(a b c . d)

is equivalent to


(a . (b . (c . d)))

Whether a given pair is a list depends upon what is stored in the cdr field. When the set-cdr! procedure is used, an object can be a list one moment and not the next:


(define x (list 'a 'b 'c))
(define y x)
y                                      ==>  (a b c)
(list? y)                              ==>  #t
(set-cdr! x 4)                         ==>  unspecified
x                                      ==>  (a . 4)
(eqv? x y)                             ==>  #t
y                                      ==>  (a . 4)
(list? y)                              ==>  #f
(set-cdr! x x)                         ==>  unspecified
(list? x)                              ==>  #f

Within literal expressions and representations of objects read by the read procedure, the forms '<datum>, `<datum>, ,<datum>, and ,@<datum> denote two-element lists whose first elements are the symbols quote, quasiquote, unquote, and unquote-splicing, respectively. The second element in each case is <datum>. This convention is supported so that arbitrary Scheme programs may be represented as lists. That is, according to Scheme’s grammar, every <expression> is also a <datum> (see section see External representation). Among other things, this permits the use of the ‘read’ procedure to parse Scheme programs. See section External representations.

procedure: pair? obj

Pair?’ returns #t if obj is a pair, and otherwise returns #f.

(pair? '(a . b))                       ==>  #t
(pair? '(a b c))                       ==>  #t
(pair? '())                            ==>  #f
(pair? '#(a b))                        ==>  #f

procedure: cons obj1 obj2

Returns a newly allocated pair whose car is obj1 and whose cdr is obj2. The pair is guaranteed to be different (in the sense of ‘eqv?’) from every existing object.

(cons 'a '())                          ==>  (a)
(cons '(a) '(b c d))                   ==>  ((a) b c d)
(cons "a" '(b c))                      ==>  ("a" b c)
(cons 'a 3)                            ==>  (a . 3)
(cons '(a b) 'c)                       ==>  ((a b) . c)

procedure: car pair

Returns the contents of the car field of pair. Note that it is an error to take the car of the empty list.

(car '(a b c))                         ==>  a
(car '((a) b c d))                     ==>  (a)
(car '(1 . 2))                         ==>  1
(car '())                              ==>  error

procedure: cdr pair

Returns the contents of the cdr field of pair. Note that it is an error to take the cdr of the empty list.

(cdr '((a) b c d))                     ==>  (b c d)
(cdr '(1 . 2))                         ==>  2
(cdr '())                              ==>  error

procedure: set-car! pair obj

Stores obj in the car field of pair. The value returned by ‘set-car!’ is unspecified.

(define (f) (list 'not-a-constant-list))
(define (g) '(constant-list))
(set-car! (f) 3)                       ==>  unspecified
(set-car! (g) 3)                       ==>  error

procedure: set-cdr! pair obj

Stores obj in the cdr field of pair. The value returned by ‘set-cdr!’ is unspecified.

library procedure: caar pair
library procedure: cadr pair
         …:          …
library procedure: cdddar pair
library procedure: cddddr pair

These procedures are compositions of ‘car’ and ‘cdr’, where for example ‘caddr’ could be defined by

(define caddr (lambda (x) (car (cdr (cdr x))))).

Arbitrary compositions, up to four deep, are provided. There are twenty-eight of these procedures in all.

library procedure: null? obj

Returns #t if obj is the empty list, otherwise returns #f.

library procedure: list? obj

Returns #t if obj is a list, otherwise returns #f. By definition, all lists have finite length and are terminated by the empty list.

        (list? '(a b c))               ==>  #t
        (list? '())                    ==>  #t
        (list? '(a . b))               ==>  #f
        (let ((x (list 'a)))
          (set-cdr! x x)
          (list? x))                   ==>  #f

library procedure: list obj …,

Returns a newly allocated list of its arguments.

(list 'a (+ 3 4) 'c)                   ==>  (a 7 c)
(list)                                 ==>  ()

library procedure: length list

Returns the length of list.

(length '(a b c))                      ==>  3
(length '(a (b) (c d e)))              ==>  3
(length '())                           ==>  0

library procedure: append list …,

Returns a list consisting of the elements of the first list followed by the elements of the other lists.

(append '(x) '(y))                     ==>  (x y)
(append '(a) '(b c d))                 ==>  (a b c d)
(append '(a (b)) '((c)))               ==>  (a (b) (c))

The resulting list is always newly allocated, except that it shares structure with the last list argument. The last argument may actually be any object; an improper list results if the last argument is not a proper list.

(append '(a b) '(c . d))               ==>  (a b c . d)
(append '() 'a)                        ==>  a

library procedure: reverse list

Returns a newly allocated list consisting of the elements of list in reverse order.

(reverse '(a b c))                     ==>  (c b a)
(reverse '(a (b c) d (e (f))))  
          ==>  ((e (f)) d (b c) a)

library procedure: list-tail list k

Returns the sublist of list obtained by omitting the first k elements. It is an error if list has fewer than k elements. ‘List-tail’ could be defined by

(define list-tail
  (lambda (x k)
    (if (zero? k)
        x
        (list-tail (cdr x) (- k 1)))))

library procedure: list-ref list k

Returns the kth element of list. (This is the same as the car of (list-tail list k).) It is an error if list has fewer than k elements.

(list-ref '(a b c d) 2)                 ==>  c
(list-ref '(a b c d)
          (inexact->exact (round 1.8))) 
          ==>  c

library procedure: memq obj list
library procedure: memv obj list
library procedure: member obj list

These procedures return the first sublist of list whose car is obj, where the sublists of list are the non-empty lists returned by (list-tail list k) for k less than the length of list. If obj does not occur in list, then #f (not the empty list) is returned. ‘Memq’ uses ‘eq?’ to compare obj with the elements of list, while ‘memv’ uses ‘eqv?’ and ‘member’ uses ‘equal?’.

(memq 'a '(a b c))                     ==>  (a b c)
(memq 'b '(a b c))                     ==>  (b c)
(memq 'a '(b c d))                     ==>  #f
(memq (list 'a) '(b (a) c))            ==>  #f
(member (list 'a)
        '(b (a) c))                    ==>  ((a) c)
(memq 101 '(100 101 102))              ==>  unspecified
(memv 101 '(100 101 102))              ==>  (101 102)

library procedure: assq obj alist
library procedure: assv obj alist
library procedure: assoc obj alist

Alist (for “association list”) must be a list of pairs. These procedures find the first pair in alist whose car field is obj, and returns that pair. If no pair in alist has obj as its car, then #f (not the empty list) is returned. ‘Assq’ uses ‘eq?’ to compare obj with the car fields of the pairs in alist, while ‘assv’ uses ‘eqv?’ and ‘assoc’ uses ‘equal?’.

(define e '((a 1) (b 2) (c 3)))
(assq 'a e)                            ==>  (a 1)
(assq 'b e)                            ==>  (b 2)
(assq 'd e)                            ==>  #f
(assq (list 'a) '(((a)) ((b)) ((c))))
                                       ==>  #f
(assoc (list 'a) '(((a)) ((b)) ((c))))   
                                       ==>  ((a))
(assq 5 '((2 3) (5 7) (11 13)))    
                                       ==>  unspecified
(assv 5 '((2 3) (5 7) (11 13)))    
                                       ==>  (5 7)

Rationale: Although they are ordinarily used as predicates, ‘memq’, ‘memv’, ‘member’, ‘assq’, ‘assv’, and ‘assoc’ do not have question marks in their names because they return useful values rather than just #t or #f.


Next: , Previous: , Up: Other data types   [Contents][Index]

6.3.3 Symbols

Symbols are objects whose usefulness rests on the fact that two symbols are identical (in the sense of ‘eqv?’) if and only if their names are spelled the same way. This is exactly the property needed to represent identifiers in programs, and so most implementations of Scheme use them internally for that purpose. Symbols are useful for many other applications; for instance, they may be used the way enumerated values are used in Pascal.

The rules for writing a symbol are exactly the same as the rules for writing an identifier; see sections Identifiers and Lexical structure.

It is guaranteed that any symbol that has been returned as part of a literal expression, or read using the ‘read’ procedure, and subsequently written out using the ‘write’ procedure, will read back in as the identical symbol (in the sense of ‘eqv?’). The ‘string->symbol’ procedure, however, can create symbols for which this write/read invariance may not hold because their names contain special characters or letters in the non-standard case.

Note: Some implementations of Scheme have a feature known as “slashification” in order to guarantee write/read invariance for all symbols, but historically the most important use of this feature has been to compensate for the lack of a string data type.

Some implementations also have “uninterned symbols”, which defeat write/read invariance even in implementations with slashification, and also generate exceptions to the rule that two symbols are the same if and only if their names are spelled the same.

procedure: symbol? obj

Returns #t if obj is a symbol, otherwise returns #f.

(symbol? 'foo)                         ==>  #t
(symbol? (car '(a b)))                 ==>  #t
(symbol? "bar")                        ==>  #f
(symbol? 'nil)                         ==>  #t
(symbol? '())                          ==>  #f
(symbol? #f)                           ==>  #f

procedure: symbol->string symbol

Returns the name of symbol as a string. If the symbol was part of an object returned as the value of a literal expression (section see Literal expressions) or by a call to the ‘read’ procedure, and its name contains alphabetic characters, then the string returned will contain characters in the implementation’s preferred standard case—some implementations will prefer upper case, others lower case. If the symbol was returned by ‘string->symbol’, the case of characters in the string returned will be the same as the case in the string that was passed to ‘string->symbol’. It is an error to apply mutation procedures like string-set! to strings returned by this procedure.

The following examples assume that the implementation’s standard case is lower case:

(symbol->string 'flying-fish)     
                                       ==>  "flying-fish"
(symbol->string 'Martin)               ==>  "martin"
(symbol->string
   (string->symbol "Malvina"))     
                                       ==>  "Malvina"

procedure: string->symbol string

Returns the symbol whose name is string. This procedure can create symbols with names containing special characters or letters in the non-standard case, but it is usually a bad idea to create such symbols because in some implementations of Scheme they cannot be read as themselves. See ‘symbol->string’.

The following examples assume that the implementation’s standard case is lower case:

(eq? 'mISSISSIppi 'mississippi)  
          ==>  #t
(string->symbol "mISSISSIppi")  
          ==>
  the symbol with name "mISSISSIppi"
(eq? 'bitBlt (string->symbol "bitBlt"))     
          ==>  #f
(eq? 'JollyWog
     (string->symbol
       (symbol->string 'JollyWog)))  
          ==>  #t
(string=? "K. Harper, M.D."
          (symbol->string
            (string->symbol "K. Harper, M.D.")))  
          ==>  #t


Next: , Previous: , Up: Other data types   [Contents][Index]

6.3.4 Characters

Characters are objects that represent printed characters such as letters and digits. Characters are written using the notation #\<character> or #\<character name>. For example:

#\a

; lower case letter

#\A

; upper case letter

#\(

; left parenthesis

#\

; the space character

#\space

; the preferred way to write a space

#\newline

; the newline character

Case is significant in #\<character>, but not in #\<character name>.

If <character> in #\<character> is alphabetic, then the character following <character> must be a delimiter character such as a space or parenthesis. This rule resolves the ambiguous case where, for example, the sequence of characters “#\ space” could be taken to be either a representation of the space character or a representation of the character “#\ s” followed by a representation of the symbol “pace.”

Characters written in the #\ notation are self-evaluating. That is, they do not have to be quoted in programs.

Some of the procedures that operate on characters ignore the difference between upper case and lower case. The procedures that ignore case have “-ci (for “case insensitive”) embedded in their names.

procedure: char? obj

Returns #t if obj is a character, otherwise returns #f.

procedure: char=? char1 char2
procedure: char<? char1 char2
procedure: char>? char1 char2
procedure: char<=? char1 char2
procedure: char>=? char1 char2

These procedures impose a total ordering on the set of characters. It is guaranteed that under this ordering:

Some implementations may generalize these procedures to take more than two arguments, as with the corresponding numerical predicates.

library procedure: char-ci=? char1 char2
library procedure: char-ci<? char1 char2
library procedure: char-ci>? char1 char2
library procedure: char-ci<=? char1 char2
library procedure: char-ci>=? char1 char2

These procedures are similar to ‘char=?’ et cetera, but they treat upper case and lower case letters as the same. For example, ‘(char-ci=? #\A #\a)’ returns #t. Some implementations may generalize these procedures to take more than two arguments, as with the corresponding numerical predicates.

library procedure: char-alphabetic? char
library procedure: char-numeric? char
library procedure: char-whitespace? char
library procedure: char-upper-case? letter
library procedure: char-lower-case? letter

These procedures return #t if their arguments are alphabetic, numeric, whitespace, upper case, or lower case characters, respectively, otherwise they return #f. The following remarks, which are specific to the ASCII character set, are intended only as a guide: The alphabetic characters are the 52 upper and lower case letters. The numeric characters are the ten decimal digits. The whitespace characters are space, tab, line feed, form feed, and carriage return.

procedure: char->integer char
procedure: integer->char n

Given a character, ‘char->integer’ returns an exact integer representation of the character. Given an exact integer that is the image of a character under ‘char->integer’, ‘integer->char’ returns that character. These procedures implement order-preserving isomorphisms between the set of characters under the char<=? ordering and some subset of the integers under the ‘<=’ ordering. That is, if

(char<=? a b) ⇒ #t  and  (<= x y) ⇒ #t

and x and y are in the domain of ‘integer->char’, then

(<= (char->integer a)
    (char->integer b))                 ==>  #t

(char<=? (integer->char x)
         (integer->char y))            ==>  #t

library procedure: char-upcase char
library procedure: char-downcase char

These procedures return a character char2 such that ‘(char-ci=? char char2)’. In addition, if char is alphabetic, then the result of ‘char-upcase’ is upper case and the result of ‘char-downcase’ is lower case.


Next: , Previous: , Up: Other data types   [Contents][Index]

6.3.5 Strings

Strings are sequences of characters. Strings are written as sequences of characters enclosed within doublequotes (‘"’). A doublequote can be written inside a string only by escaping it with a backslash (\), as in


"The word \"recursion\" has many meanings."

A backslash can be written inside a string only by escaping it with another backslash. Scheme does not specify the effect of a backslash within a string that is not followed by a doublequote or backslash.

A string constant may continue from one line to the next, but the exact contents of such a string are unspecified.

The length of a string is the number of characters that it contains. This number is an exact, non-negative integer that is fixed when the string is created. The valid indexes of a string are the exact non-negative integers less than the length of the string. The first character of a string has index 0, the second has index 1, and so on.

In phrases such as “the characters of string beginning with index start and ending with index end,” it is understood that the index start is inclusive and the index end is exclusive. Thus if start and end are the same index, a null substring is referred to, and if start is zero and end is the length of string, then the entire string is referred to.

Some of the procedures that operate on strings ignore the difference between upper and lower case. The versions that ignore case have “‘-ci’” (for “case insensitive”) embedded in their names.

procedure: string? obj

Returns #t if obj is a string, otherwise returns #f.

procedure: make-string k
procedure: make-string k char

Make-string’ returns a newly allocated string of length k. If char is given, then all elements of the string are initialized to char, otherwise the contents of the string are unspecified.

library procedure: string char …,

Returns a newly allocated string composed of the arguments.

procedure: string-length string

Returns the number of characters in the given string.

procedure: string-ref string k

k must be a valid index of string. ‘String-ref’ returns character k of string using zero-origin indexing.

procedure: string-set! string k char

k must be a valid index of string . ‘String-set!’ stores char in element k of string and returns an unspecified value.

(define (f) (make-string 3 #\*))
(define (g) "***")
(string-set! (f) 0 #\?)                ==>  unspecified
(string-set! (g) 0 #\?)                ==>  error
(string-set! (symbol->string 'immutable)
             0
             #\?)                      ==>  error

library procedure: string=? string1 string2
library procedure: string-ci=? string1 string2

Returns #t if the two strings are the same length and contain the same characters in the same positions, otherwise returns #f. ‘String-ci=?’ treats upper and lower case letters as though they were the same character, but ‘string=?’ treats upper and lower case as distinct characters.

library procedure: string<? string1 string2
library procedure: string>? string1 string2
library procedure: string<=? string1 string2
library procedure: string>=? string1 string2
library procedure: string-ci<? string1 string2
library procedure: string-ci>? string1 string2
library procedure: string-ci<=? string1 string2
library procedure: string-ci>=? string1 string2

These procedures are the lexicographic extensions to strings of the corresponding orderings on characters. For example, ‘string<?’ is the lexicographic ordering on strings induced by the ordering ‘char<?’ on characters. If two strings differ in length but are the same up to the length of the shorter string, the shorter string is considered to be lexicographically less than the longer string.

Implementations may generalize these and the ‘string=?’ and ‘string-ci=?’ procedures to take more than two arguments, as with the corresponding numerical predicates.

library procedure: substring string start end

String must be a string, and start and end must be exact integers satisfying

0 <= start <= end <= (string-length string).

Substring’ returns a newly allocated string formed from the characters of string beginning with index start (inclusive) and ending with index end (exclusive).

library procedure: string-append string …,

Returns a newly allocated string whose characters form the concatenation of the given strings.

library procedure: string->list string
library procedure: list->string list

String->list’ returns a newly allocated list of the characters that make up the given string. ‘List->string’ returns a newly allocated string formed from the characters in the list list, which must be a list of characters. ‘String->list’ and ‘list->string’ are inverses so far as ‘equal?’ is concerned.

library procedure: string-copy string

Returns a newly allocated copy of the given string.

library procedure: string-fill! string char

Stores char in every element of the given string and returns an unspecified value.


Previous: , Up: Other data types   [Contents][Index]

6.3.6 Vectors

Vectors are heterogeneous structures whose elements are indexed by integers. A vector typically occupies less space than a list of the same length, and the average time required to access a randomly chosen element is typically less for the vector than for the list.

The length of a vector is the number of elements that it contains. This number is a non-negative integer that is fixed when the vector is created. The valid indexes of a vector are the exact non-negative integers less than the length of the vector. The first element in a vector is indexed by zero, and the last element is indexed by one less than the length of the vector.

Vectors are written using the notation #(obj …,). For example, a vector of length 3 containing the number zero in element 0, the list ‘(2 2 2 2)’ in element 1, and the string ‘"Anna"’ in element 2 can be written as following:


#(0 (2 2 2 2) "Anna")

Note that this is the external representation of a vector, not an expression evaluating to a vector. Like list constants, vector constants must be quoted:


'#(0 (2 2 2 2) "Anna")  
          ==>  #(0 (2 2 2 2) "Anna")

procedure: vector? obj

Returns #t if obj is a vector, otherwise returns #f.

procedure: make-vector k
procedure: make-vector k fill

Returns a newly allocated vector of k elements. If a second argument is given, then each element is initialized to fill. Otherwise the initial contents of each element is unspecified.

library procedure: vector obj …,

Returns a newly allocated vector whose elements contain the given arguments. Analogous to ‘list’.

(vector 'a 'b 'c)                      ==>  #(a b c)

procedure: vector-length vector

Returns the number of elements in vector as an exact integer.

procedure: vector-ref vector k

k must be a valid index of vector. ‘Vector-ref’ returns the contents of element k of vector.

(vector-ref '#(1 1 2 3 5 8 13 21)
            5)  
          ==>  8
(vector-ref '#(1 1 2 3 5 8 13 21)
            (let ((i (round (* 2 (acos -1)))))
              (if (inexact? i)
                  (inexact->exact i)
                  i))) 
          ==> 13

procedure: vector-set! vector k obj

k must be a valid index of vector. ‘Vector-set!’ stores obj in element k of vector. The value returned by ‘vector-set!’ is unspecified.

(let ((vec (vector 0 '(2 2 2 2) "Anna")))
  (vector-set! vec 1 '("Sue" "Sue"))
  vec)      
          ==>  #(0 ("Sue" "Sue") "Anna")

(vector-set! '#(0 1 2) 1 "doe")  
          ==>  error  ; constant vector

library procedure: vector->list vector
library procedure: list->vector list

Vector->list’ returns a newly allocated list of the objects contained in the elements of vector. ‘List->vector’ returns a newly created vector initialized to the elements of the list list.

(vector->list '#(dah dah didah))  
          ==>  (dah dah didah)
(list->vector '(dididit dah))   
          ==>  #(dididit dah)

library procedure: vector-fill! vector fill

Stores fill in every element of vector. The value returned by ‘vector-fill!’ is unspecified.


Next: , Previous: , Up: Standard procedures   [Contents][Index]

6.4 Control features

This chapter describes various primitive procedures which control the flow of program execution in special ways. The ‘procedure?’ predicate is also described here.

procedure: procedure? obj

Returns #t if obj is a procedure, otherwise returns #f.

(procedure? car)                       ==>  #t
(procedure? 'car)                      ==>  #f
(procedure? (lambda (x) (* x x)))   
                                       ==>  #t
(procedure? '(lambda (x) (* x x)))  
                                       ==>  #f
(call-with-current-continuation procedure?)
                                       ==>  #t

procedure: apply proc arg1 … args

Proc must be a procedure and args must be a list. Calls proc with the elements of the list ‘(append (list arg1 …,) args)’ as the actual arguments.

(apply + (list 3 4))                   ==>  7

(define compose
  (lambda (f g)
    (lambda args
      (f (apply g args)))))

((compose sqrt *) 12 75)               ==>  30

library procedure: map proc list1 list2 …,

The lists must be lists, and proc must be a procedure taking as many arguments as there are lists and returning a single value. If more than one list is given, then they must all be the same length. ‘Map’ applies proc element-wise to the elements of the lists and returns a list of the results, in order. The dynamic order in which proc is applied to the elements of the lists is unspecified.

(map cadr '((a b) (d e) (g h)))   
          ==>  (b e h)

(map (lambda (n) (expt n n))
     '(1 2 3 4 5))                
          ==>  (1 4 27 256 3125)

(map + '(1 2 3) '(4 5 6))              ==>  (5 7 9)

(let ((count 0))
  (map (lambda (ignored)
         (set! count (+ count 1))
         count)
       '(a b)))                        ==>  (1 2) or (2 1)

library procedure: for-each proc list1 list2 …,

The arguments to ‘for-each’ are like the arguments to ‘map’, but ‘for-each’ calls proc for its side effects rather than for its values. Unlike ‘map’, ‘for-each’ is guaranteed to call proc on the elements of the lists in order from the first element(s) to the last, and the value returned by ‘for-each’ is unspecified.

(let ((v (make-vector 5)))
  (for-each (lambda (i)
              (vector-set! v i (* i i)))
            '(0 1 2 3 4))
  v)                                   ==>  #(0 1 4 9 16)

library procedure: force promise

Forces the value of promise (see delay, section see Delayed evaluation). If no value has been computed for the promise, then a value is computed and returned. The value of the promise is cached (or “memoized”) so that if it is forced a second time, the previously computed value is returned.

(force (delay (+ 1 2)))                ==>  3
(let ((p (delay (+ 1 2))))
  (list (force p) (force p)))  
                                       ==>  (3 3)

(define a-stream
  (letrec ((next
            (lambda (n)
              (cons n (delay (next (+ n 1)))))))
    (next 0)))
(define head car)
(define tail
  (lambda (stream) (force (cdr stream))))

(head (tail (tail a-stream)))  
                                       ==>  2

Force’ and ‘delay’ are mainly intended for programs written in functional style. The following examples should not be considered to illustrate good programming style, but they illustrate the property that only one value is computed for a promise, no matter how many times it is forced.

(define count 0)
(define p
  (delay (begin (set! count (+ count 1))
                (if (> count x)
                    count
                    (force p)))))
(define x 5)
p                                      ==>  a promise
(force p)                              ==>  6
p                                      ==>  a promise, still
(begin (set! x 10)
       (force p))                      ==>  6

Here is a possible implementation of ‘delay’ and ‘force’. Promises are implemented here as procedures of no arguments, and ‘force’ simply calls its argument:

(define force
  (lambda (object)
    (object)))

We define the expression

(delay <expression>)

to have the same meaning as the procedure call

(make-promise (lambda () <expression>))

as follows

(define-syntax delay
  (syntax-rules ()
    ((delay expression)
     (make-promise (lambda () expression))))),

where ‘make-promise’ is defined as follows:

(define make-promise
  (lambda (proc)
    (let ((result-ready? #f)
          (result #f))
      (lambda ()
        (if result-ready?
            result
            (let ((x (proc)))
              (if result-ready?
                  result
                  (begin (set! result-ready? #t)
                         (set! result x)
                         result))))))))

Rationale: A promise may refer to its own value, as in the last example above. Forcing such a promise may cause the promise to be forced a second time before the value of the first force has been computed. This complicates the definition of ‘make-promise’.

Various extensions to this semantics of ‘delay’ and ‘force’ are supported in some implementations:

procedure: call-with-current-continuation proc

Proc must be a procedure of one argument. The procedure ‘call-with-current-continuation’ packages up the current continuation (see the rationale below) as an “escape procedure” and passes it as an argument to proc. The escape procedure is a Scheme procedure that, if it is later called, will abandon whatever continuation is in effect at that later time and will instead use the continuation that was in effect when the escape procedure was created. Calling the escape procedure may cause the invocation of before and after thunks installed using dynamic-wind.

The escape procedure accepts the same number of arguments as the continuation to the original call to call-with-current-continuation. Except for continuations created by the ‘call-with-values’ procedure, all continuations take exactly one value. The effect of passing no value or more than one value to continuations that were not created by call-with-values is unspecified.

The escape procedure that is passed to proc has unlimited extent just like any other procedure in Scheme. It may be stored in variables or data structures and may be called as many times as desired.

The following examples show only the most common ways in which ‘call-with-current-continuation’ is used. If all real uses were as simple as these examples, there would be no need for a procedure with the power of ‘call-with-current-continuation’.

(call-with-current-continuation
  (lambda (exit)
    (for-each (lambda (x)
                (if (negative? x)
                    (exit x)))
              '(54 0 37 -3 245 19))
    #t))                               ==>  -3

(define list-length
  (lambda (obj)
    (call-with-current-continuation
      (lambda (return)
        (letrec ((r
                  (lambda (obj)
                    (cond ((null? obj) 0)
                          ((pair? obj)
                           (+ (r (cdr obj)) 1))
                          (else (return #f))))))
          (r obj))))))

(list-length '(1 2 3 4))               ==>  4

(list-length '(a b . c))               ==>  #f

Rationale:

A common use of ‘call-with-current-continuation’ is for structured, non-local exits from loops or procedure bodies, but in fact ‘call-with-current-continuation’ is extremely useful for implementing a wide variety of advanced control structures.

Whenever a Scheme expression is evaluated there is a continuation wanting the result of the expression. The continuation represents an entire (default) future for the computation. If the expression is evaluated at top level, for example, then the continuation might take the result, print it on the screen, prompt for the next input, evaluate it, and so on forever. Most of the time the continuation includes actions specified by user code, as in a continuation that will take the result, multiply it by the value stored in a local variable, add seven, and give the answer to the top level continuation to be printed. Normally these ubiquitous continuations are hidden behind the scenes and programmers do not think much about them. On rare occasions, however, a programmer may need to deal with continuations explicitly. ‘Call-with-current-continuation’ allows Scheme programmers to do that by creating a procedure that acts just like the current continuation.

Most programming languages incorporate one or more special-purpose escape constructs with names like exit, ‘return, or even goto. In 1965, however, Peter Landin [Landin65] invented a general purpose escape operator called the J-operator. John Reynolds [Reynolds72] described a simpler but equally powerful construct in 1972. The ‘catch’ special form described by Sussman and Steele in the 1975 report on Scheme is exactly the same as Reynolds’s construct, though its name came from a less general construct in MacLisp. Several Scheme implementors noticed that the full power of the catch construct could be provided by a procedure instead of by a special syntactic construct, and the name ‘call-with-current-continuation’ was coined in 1982. This name is descriptive, but opinions differ on the merits of such a long name, and some people use the name call/cc instead.

procedure: values obj …

Delivers all of its arguments to its continuation. Except for continuations created by the call-with-values procedure, all continuations take exactly one value. Values might be defined as follows:

(define (values . things)
  (call-with-current-continuation 
    (lambda (cont) (apply cont things))))

procedure: call-with-values producer consumer

Calls its producer argument with no values and a continuation that, when passed some values, calls the consumer procedure with those values as arguments. The continuation for the call to consumer is the continuation of the call to call-with-values.

(call-with-values (lambda () (values 4 5))
                  (lambda (a b) b))
                                                   ==>  5

(call-with-values * -)                             ==>  -1

procedure: dynamic-wind before thunk after

Calls thunk without arguments, returning the result(s) of this call. Before and after are called, also without arguments, as required by the following rules (note that in the absence of calls to continuations captured using call-with-current-continuation the three arguments are called once each, in order). Before is called whenever execution enters the dynamic extent of the call to thunk and after is called whenever it exits that dynamic extent. The dynamic extent of a procedure call is the period between when the call is initiated and when it returns. In Scheme, because of ‘call-with-current-continuation’, the dynamic extent of a call may not be a single, connected time period. It is defined as follows:

If a second call to ‘dynamic-wind’ occurs within the dynamic extent of the call to thunk and then a continuation is invoked in such a way that the afters from these two invocations of ‘dynamic-wind’ are both to be called, then the after associated with the second (inner) call to ‘dynamic-wind’ is called first.

If a second call to ‘dynamic-wind’ occurs within the dynamic extent of the call to thunk and then a continuation is invoked in such a way that the befores from these two invocations of ‘dynamic-wind’ are both to be called, then the before associated with the first (outer) call to ‘dynamic-wind’ is called first.

If invoking a continuation requires calling the before from one call to ‘dynamic-wind’ and the after from another, then the after is called first.

The effect of using a captured continuation to enter or exit the dynamic extent of a call to before or after is undefined.

(let ((path '())
      (c #f))
  (let ((add (lambda (s)
               (set! path (cons s path)))))
    (dynamic-wind
      (lambda () (add 'connect))
      (lambda ()
        (add (call-with-current-continuation
               (lambda (c0)
                 (set! c c0)
                 'talk1))))
      (lambda () (add 'disconnect)))
    (if (< (length path) 4)
        (c 'talk2)
        (reverse path))))
    
          ==> (connect talk1 disconnect
               connect talk2 disconnect)


Next: , Previous: , Up: Standard procedures   [Contents][Index]

6.5 Eval

procedure: eval expression environment-specifier

Evaluates expression in the specified environment and returns its value. Expression must be a valid Scheme expression represented as data, and environment-specifier must be a value returned by one of the three procedures described below. Implementations may extend ‘eval’ to allow non-expression programs (definitions) as the first argument and to allow other values as environments, with the restriction that ‘eval’ is not allowed to create new bindings in the environments associated with ‘null-environment’ or ‘scheme-report-environment’.

(eval '(* 7 3) (scheme-report-environment 5))
                                                   ==>  21

(let ((f (eval '(lambda (f x) (f x x))
               (null-environment 5))))
  (f + 10))
                                                   ==>  20

procedure: scheme-report-environment version
procedure: null-environment version

Version must be the exact integer ‘5’, corresponding to this revision of the Scheme report (the Revised^5 Report on Scheme). ‘Scheme-report-environment’ returns a specifier for an environment that is empty except for all bindings defined in this report that are either required or both optional and supported by the implementation. ‘Null-environment’ returns a specifier for an environment that is empty except for the (syntactic) bindings for all syntactic keywords defined in this report that are either required or both optional and supported by the implementation.

Other values of version can be used to specify environments matching past revisions of this report, but their support is not required. An implementation will signal an error if version is neither ‘5’ nor another value supported by the implementation.

The effect of assigning (through the use of ‘eval’) a variable bound in a ‘scheme-report-environment’ (for example ‘car’) is unspecified. Thus the environments specified by ‘scheme-report-environment’ may be immutable.

optional procedure: interaction-environment

This procedure returns a specifier for the environment that contains implementation-defined bindings, typically a superset of those listed in the report. The intent is that this procedure will return the environment in which the implementation would evaluate expressions dynamically typed by the user.


Previous: , Up: Standard procedures   [Contents][Index]

6.6 Input and output


Next: , Previous: , Up: Input and output   [Contents][Index]

6.6.1 Ports

Ports represent input and output devices. To Scheme, an input port is a Scheme object that can deliver characters upon command, while an output port is a Scheme object that can accept characters.

library procedure: call-with-input-file string proc
library procedure: call-with-output-file string proc

String should be a string naming a file, and proc should be a procedure that accepts one argument. For ‘call-with-input-file’, the file should already exist; for ‘call-with-output-file’, the effect is unspecified if the file already exists. These procedures call proc with one argument: the port obtained by opening the named file for input or output. If the file cannot be opened, an error is signalled. If proc returns, then the port is closed automatically and the value(s) yielded by the proc is(are) returned. If proc does not return, then the port will not be closed automatically unless it is possible to prove that the port will never again be used for a read or write operation.

Rationale: Because Scheme’s escape procedures have unlimited extent, it is possible to escape from the current continuation but later to escape back in. If implementations were permitted to close the port on any escape from the current continuation, then it would be impossible to write portable code using both ‘call-with-current-continuation’ and ‘call-with-input-file’ or ‘call-with-output-file’.

procedure: input-port? obj
procedure: output-port? obj

Returns #t if obj is an input port or output port respectively, otherwise returns #f.

procedure: current-input-port
procedure: current-output-port

Returns the current default input or output port.

optional procedure: with-input-from-file string thunk
optional procedure: with-output-to-file string thunk

String should be a string naming a file, and proc should be a procedure of no arguments. For ‘with-input-from-file’, the file should already exist; for ‘with-output-to-file’, the effect is unspecified if the file already exists. The file is opened for input or output, an input or output port connected to it is made the default value returned by ‘current-input-port’ or ‘current-output-port’ (and is used by (read), (write obj), and so forth), and the thunk is called with no arguments. When the thunk returns, the port is closed and the previous default is restored. ‘With-input-from-file’ and ‘with-output-to-file’ return(s) the value(s) yielded by thunk. If an escape procedure is used to escape from the continuation of these procedures, their behavior is implementation dependent.

procedure: open-input-file filename

Takes a string naming an existing file and returns an input port capable of delivering characters from the file. If the file cannot be opened, an error is signalled.

procedure: open-output-file filename

Takes a string naming an output file to be created and returns an output port capable of writing characters to a new file by that name. If the file cannot be opened, an error is signalled. If a file with the given name already exists, the effect is unspecified.

procedure: close-input-port port
procedure: close-output-port port

Closes the file associated with port, rendering the port incapable of delivering or accepting characters.

These routines have no effect if the file has already been closed. The value returned is unspecified.


Next: , Previous: , Up: Input and output   [Contents][Index]

6.6.2 Input

 






library procedure: read
library procedure: read port

Read’ converts external representations of Scheme objects into the objects themselves. That is, it is a parser for the nonterminal <datum> (see sections see External representation and see Pairs and lists). ‘Read’ returns the next object parsable from the given input port, updating port to point to the first character past the end of the external representation of the object.

If an end of file is encountered in the input before any characters are found that can begin an object, then an end of file object is returned. The port remains open, and further attempts to read will also return an end of file object. If an end of file is encountered after the beginning of an object’s external representation, but the external representation is incomplete and therefore not parsable, an error is signalled.

The port argument may be omitted, in which case it defaults to the value returned by ‘current-input-port’. It is an error to read from a closed port.

procedure: read-char
procedure: read-char port

Returns the next character available from the input port, updating the port to point to the following character. If no more characters are available, an end of file object is returned. Port may be omitted, in which case it defaults to the value returned by ‘current-input-port’.

procedure: peek-char
procedure: peek-char port

Returns the next character available from the input port, without updating the port to point to the following character. If no more characters are available, an end of file object is returned. Port may be omitted, in which case it defaults to the value returned by ‘current-input-port’.

Note: The value returned by a call to ‘peek-char’ is the same as the value that would have been returned by a call to ‘read-char’ with the same port. The only difference is that the very next call to ‘read-char’ or ‘peek-char’ on that port will return the value returned by the preceding call to ‘peek-char’. In particular, a call to ‘peek-char’ on an interactive port will hang waiting for input whenever a call to ‘read-char’ would have hung.

procedure: eof-object? obj

Returns #t if obj is an end of file object, otherwise returns #f. The precise set of end of file objects will vary among implementations, but in any case no end of file object will ever be an object that can be read in using ‘read’.

procedure: char-ready?
procedure: char-ready? port

Returns #t if a character is ready on the input port and returns #f otherwise. If ‘char-ready’ returns #t then the next ‘read-char’ operation on the given port is guaranteed not to hang. If the port is at end of file then ‘char-ready?’ returns #t. Port may be omitted, in which case it defaults to the value returned by ‘current-input-port’.

Rationale:Char-ready?’ exists to make it possible for a program to accept characters from interactive ports without getting stuck waiting for input. Any input editors associated with such ports must ensure that characters whose existence has been asserted by ‘char-ready?’ cannot be rubbed out. If ‘char-ready?’ were to return #f at end of file, a port at end of file would be indistinguishable from an interactive port that has no ready characters.


Next: , Previous: , Up: Input and output   [Contents][Index]

6.6.3 Output






library procedure: write obj
library procedure: write obj port

Writes a written representation of obj to the given port. Strings that appear in the written representation are enclosed in doublequotes, and within those strings backslash and doublequote characters are escaped by backslashes. Character objects are written using the ‘#\’ notation. ‘Write’ returns an unspecified value. The port argument may be omitted, in which case it defaults to the value returned by ‘current-output-port’.

library procedure: display obj
library procedure: display obj port

Writes a representation of obj to the given port. Strings that appear in the written representation are not enclosed in doublequotes, and no characters are escaped within those strings. Character objects appear in the representation as if written by ‘write-char’ instead of by ‘write’. ‘Display’ returns an unspecified value. The port argument may be omitted, in which case it defaults to the value returned by ‘current-output-port’.

Rationale:Write’ is intended for producing machine-readable output and ‘display’ is for producing human-readable output. Implementations that allow “slashification” within symbols will probably want ‘write’ but not ‘display’ to slashify funny characters in symbols.

library procedure: newline
library procedure: newline port

Writes an end of line to port. Exactly how this is done differs from one operating system to another. Returns an unspecified value. The port argument may be omitted, in which case it defaults to the value returned by ‘current-output-port’.

procedure: write-char char
procedure: write-char char port

Writes the character char (not an external representation of the character) to the given port and returns an unspecified value. The port argument may be omitted, in which case it defaults to the value returned by ‘current-output-port’.


Previous: , Up: Input and output   [Contents][Index]

6.6.4 System interface

Questions of system interface generally fall outside of the domain of this report. However, the following operations are important enough to deserve description here.

optional procedure: load filename

Filename should be a string naming an existing file containing Scheme source code. The ‘load’ procedure reads expressions and definitions from the file and evaluates them sequentially. It is unspecified whether the results of the expressions are printed. The ‘load’ procedure does not affect the values returned by ‘current-input-port’ and ‘current-output-port’. ‘Load’ returns an unspecified value.

Rationale: For portability, ‘load’ must operate on source files. Its operation on other kinds of files necessarily varies among implementations.

optional procedure: transcript-on filename
optional procedure: transcript-off

Filename must be a string naming an output file to be created. The effect of ‘transcript-on’ is to open the named file for output, and to cause a transcript of subsequent interaction between the user and the Scheme system to be written to the file. The transcript is ended by a call to ‘transcript-off’, which closes the transcript file. Only one transcript may be in progress at any time, though some implementations may relax this restriction. The values returned by these procedures are unspecified.


Next: , Previous: , Up: top   [Contents][Index]

7 Formal syntax and semantics

This chapter provides formal descriptions of what has already been described informally in previous chapters of this report.


Next: , Previous: , Up: Formal syntax and semantics   [Contents][Index]

7.1 Formal syntax

This section provides a formal syntax for Scheme written in an extended BNF.

All spaces in the grammar are for legibility. Case is insignificant; for example, ‘#x1A’ and ‘#X1a’ are equivalent. <empty> stands for the empty string.

The following extensions to BNF are used to make the description more concise: <thing>* means zero or more occurrences of <thing>; and <thing>+ means at least one <thing>.


Next: , Previous: , Up: Formal syntax   [Contents][Index]

7.1.1 Lexical structure

This section describes how individual tokens (identifiers, numbers, etc.) are formed from sequences of characters. The following sections describe how expressions and programs are formed from sequences of tokens.

<Intertoken space> may occur on either side of any token, but not within a token.

Tokens which require implicit termination (identifiers, numbers, characters, and dot) may be terminated by any <delimiter>, but not necessarily by anything else.

The following five characters are reserved for future extensions to the language: [ ] { } |

<token> --> <identifier> | <boolean> | <number>
     | <character> | <string>
     | ( | ) | #( | ' | ` | , | ,@ | .
<delimiter> --> <whitespace> | ( | ) | " | ;
<whitespace> --> <space or newline>
<comment> --> ;  <all subsequent characters up to a
                 line break>
<atmosphere> --> <whitespace> | <comment>
<intertoken space> --> <atmosphere>*

<identifier> --> <initial> <subsequent>*
     | <peculiar identifier>
<initial> --> <letter> | <special initial>
<letter> --> a | b | c | ... | z

<special initial> --> ! | $ | % | & | * | / | : | < | =
     | > | ? | ^ | _ | ~
<subsequent> --> <initial> | <digit>
     | <special subsequent>
<digit> --> 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9
<special subsequent> --> + | - | . | @
<peculiar identifier> --> + | - | ...
<syntactic keyword> --> <expression keyword>
     | else | => | define 
     | unquote | unquote-splicing
<expression keyword> --> quote | lambda | if
     | set! | begin | cond | and | or | case
     | let | let* | letrec | do | delay
     | quasiquote

‘<variable> ⇒ <any <identifier> that isn’t
                also a <syntactic keyword>>

<boolean> --> #t | #f
<character> --> #\ <any character>
     | #\ <character name>
<character name> --> space | newline

<string> --> " <string element>* "
<string element> --> <any character other than " or \>
     | \" | \\ 

<number> --> <num 2>| <num 8>
     | <num 10>| <num 16>


The following rules for <num R>, <complex R>, <real R>, <ureal R>, <uinteger R>, and <prefix R> should be replicated for R = 2, 8, 10, and 16. There are no rules for <decimal 2>, <decimal 8>, and <decimal 16>, which means that numbers containing decimal points or exponents must be in decimal radix.

<num R> --> <prefix R> <complex R>
<complex R> --> <real R> | <real R> @ <real R>
    | <real R> + <ureal R> i | <real R> - <ureal R> i
    | <real R> + i | <real R> - i
    | + <ureal R> i | - <ureal R> i | + i | - i
<real R> --> <sign> <ureal R>
<ureal R> --> <uinteger R>
    | <uinteger R> / <uinteger R>
    | <decimal R>
<decimal 10> --> <uinteger 10> <suffix>
    | . <digit 10>+ #* <suffix>
    | <digit 10>+ . <digit 10>* #* <suffix>
    | <digit 10>+ #+ . #* <suffix>
<uinteger R> --> <digit R>+ #*
<prefix R> --> <radix R> <exactness>
    | <exactness> <radix R>


<suffix> --> <empty> 
    | <exponent marker> <sign> <digit 10>+
<exponent marker> --> e | s | f | d | l
<sign> --> <empty>  | + |  -
<exactness> --> <empty> | #i | #e
<radix 2> --> #b
<radix 8> --> #o
<radix 10> --> <empty> | #d
<radix 16> --> #x
<digit 2> --> 0 | 1
<digit 8> --> 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7
<digit 10> --> <digit>
<digit 16> --> <digit 10> | a | b | c | d | e | f 


Next: , Previous: , Up: Formal syntax   [Contents][Index]

7.1.2 External representations

<Datum> is what the read procedure (section see Input) successfully parses. Note that any string that parses as an <expression> will also parse as a <datum>.

<datum> --> <simple datum> | <compound datum>
<simple datum> --> <boolean> | <number>
     | <character> | <string> |  <symbol>
<symbol> --> <identifier>
<compound datum> --> <list> | <vector>
<list> --> (<datum>*) | (<datum>+ . <datum>)
       | <abbreviation>
<abbreviation> --> <abbrev prefix> <datum>
<abbrev prefix> --> ' | ` | , | ,@
<vector> --> #(<datum>*) 


Next: , Previous: , Up: Formal syntax   [Contents][Index]

7.1.3 Expressions

<expression> --> <variable>
     | <literal>
     | <procedure call>
     | <lambda expression>
     | <conditional>
     | <assignment>
     | <derived expression>
     | <macro use>
     | <macro block>

<literal> --> <quotation> | <self-evaluating>
<self-evaluating> --> <boolean> | <number>
     | <character> | <string>
<quotation> --> '<datum> | (quote <datum>)
<procedure call> --> (<operator> <operand>*)
<operator> --> <expression>
<operand> --> <expression>

<lambda expression> --> (lambda <formals> <body>)
<formals> --> (<variable>*) | <variable>
     | (<variable>+ . <variable>)
<body> --> <definition>* <sequence>
<sequence> --> <command>* <expression>
<command> --> <expression>

<conditional> --> (if <test> <consequent> <alternate>)
<test> --> <expression>
<consequent> --> <expression>
<alternate> --> <expression> | <empty>

<assignment> --> (set! <variable> <expression>)

<derived expression> -->
       (cond <cond clause>+)
     | (cond <cond clause>* (else <sequence>))
     | (case <expression>
         <case clause>+)
     | (case <expression>
         <case clause>*
         (else <sequence>))
     | (and <test>*)
     | (or <test>*)
     | (let (<binding spec>*) <body>)
     | (let <variable> (<binding spec>*) <body>)
     | (let* (<binding spec>*) <body>)
     | (letrec (<binding spec>*) <body>)
     | (begin <sequence>)
     | (do (<iteration spec>*)
           (<test> <do result>)
         <command>*)
     | (delay <expression>)
     | <quasiquotation>

<cond clause> --> (<test> <sequence>)
      | (<test>)
      | (<test> => <recipient>)
<recipient> --> <expression>
<case clause> --> ((<datum>*) <sequence>)
<binding spec> --> (<variable> <expression>)
<iteration spec> --> (<variable> <init> <step>)
    | (<variable> <init>)
<init> --> <expression>
<step> --> <expression>
<do result> --> <sequence> | <empty>

<macro use> --> (<keyword> <datum>*)
<keyword> --> <identifier>

<macro block> -->
     (let-syntax (<syntax spec>*) <body>)
     | (letrec-syntax (<syntax spec>*) <body>)
<syntax spec> --> (<keyword> <transformer spec>)




Next: , Previous: , Up: Formal syntax   [Contents][Index]

7.1.4 Quasiquotations

The following grammar for quasiquote expressions is not context-free. It is presented as a recipe for generating an infinite number of production rules. Imagine a copy of the following rules for D = 1, 2,3, …. D keeps track of the nesting depth.

<quasiquotation> --> <quasiquotation 1>
<qq template 0> --> <expression>
<quasiquotation D> --> `<qq template D>
       | (quasiquote <qq template D>)
<qq template D> --> <simple datum>
       | <list qq template D>
       | <vector qq template D>
       | <unquotation D>
<list qq template D> --> (<qq template or splice D>*)
       | (<qq template or splice D>+ . <qq template D>)
       | '<qq template D>
       | <quasiquotation D+1>
<vector qq template D> --> #(<qq template or splice D>*)
<unquotation D> --> ,<qq template D-1>
       | (unquote <qq template D-1>)
<qq template or splice D> --> <qq template D>
       | <splicing unquotation D>
<splicing unquotation D> --> ,@<qq template D-1>
       | (unquote-splicing <qq template D-1>) 

In <quasiquotation>s, a <list qq template D> can sometimes be confused with either an <unquotation D> or a <splicing unquotation D>. The interpretation as an <unquotation> or <splicing unquotation D> takes precedence.


Next: , Previous: , Up: Formal syntax   [Contents][Index]

7.1.5 Transformers

<transformer spec> -->
    (syntax-rules (<identifier>*) <syntax rule>*)
<syntax rule> --> (<pattern> <template>)
<pattern> --> <pattern identifier>
     | (<pattern>*)
     | (<pattern>+ . <pattern>)
     | (<pattern>* <pattern> <ellipsis>)
     | #(<pattern>*)
     | #(<pattern>* <pattern> <ellipsis>)
     | <pattern datum>
<pattern datum> --> <string>
     | <character>
     | <boolean>
     | <number>
<template> --> <pattern identifier>
     | (<template element>*)
     | (<template element>+ . <template>)
     | #(<template element>*)
     | <template datum>
<template element> --> <template>
     | <template> <ellipsis>
<template datum> --> <pattern datum>
<pattern identifier> --> <any identifier except ‘...’>
<ellipsis> --> <the identifier ‘...’>



Previous: , Up: Formal syntax   [Contents][Index]

7.1.6 Programs and definitions

<program> --> <command or definition>*
<command or definition> --> <command>
    | <definition>
    | <syntax definition>
    | (begin <command or definition>+)
<definition> --> (define <variable> <expression>)
      | (define (<variable> <def formals>) <body>)
      | (begin <definition>*)
<def formals> --> <variable>*
      | <variable>* . <variable>
<syntax definition> -->
     (define-syntax <keyword> <transformer spec>)



Next: , Previous: , Up: Formal syntax and semantics   [Contents][Index]

7.2 Formal semantics

This section provides a formal denotational semantics for the primitive expressions of Scheme and selected built-in procedures. The concepts and notation used here are described in [STOY77].

Note: The formal semantics section was written in LaTeX which is incompatible with TeXinfo. See the Formal semantics section of the original document from which this was derived.


Previous: , Up: Formal syntax and semantics   [Contents][Index]

7.3 Derived expression types

This section gives macro definitions for the derived expression types in terms of the primitive expression types (literal, variable, call, ‘lambda’, ‘if’, ‘set!’). See section Control features for a possible definition of ‘delay’.


(define-syntax cond
  (syntax-rules (else =>)
    ((cond (else result1 result2 ...))
     (begin result1 result2 ...))
    ((cond (test => result))
     (let ((temp test))
       (if temp (result temp))))
    ((cond (test => result) clause1 clause2 ...)
     (let ((temp test))
       (if temp
           (result temp)
           (cond clause1 clause2 ...))))
    ((cond (test)) test)
    ((cond (test) clause1 clause2 ...)
     (let ((temp test))
       (if temp
           temp
           (cond clause1 clause2 ...))))
    ((cond (test result1 result2 ...))
     (if test (begin result1 result2 ...)))
    ((cond (test result1 result2 ...)
           clause1 clause2 ...)
     (if test
         (begin result1 result2 ...)
         (cond clause1 clause2 ...)))))


(define-syntax case
  (syntax-rules (else)
    ((case (key ...)
       clauses ...)
     (let ((atom-key (key ...)))
       (case atom-key clauses ...)))
    ((case key
       (else result1 result2 ...))
     (begin result1 result2 ...))
    ((case key
       ((atoms ...) result1 result2 ...))
     (if (memv key '(atoms ...))
         (begin result1 result2 ...)))
    ((case key
       ((atoms ...) result1 result2 ...)
       clause clauses ...)
     (if (memv key '(atoms ...))
         (begin result1 result2 ...)
         (case key clause clauses ...)))))


(define-syntax and
  (syntax-rules ()
    ((and) #t)
    ((and test) test)
    ((and test1 test2 ...)
     (if test1 (and test2 ...) #f))))


(define-syntax or
  (syntax-rules ()
    ((or) #f)
    ((or test) test)
    ((or test1 test2 ...)
     (let ((x test1))
       (if x x (or test2 ...))))))


(define-syntax let
  (syntax-rules ()
    ((let ((name val) ...) body1 body2 ...)
     ((lambda (name ...) body1 body2 ...)
      val ...))
    ((let tag ((name val) ...) body1 body2 ...)
     ((letrec ((tag (lambda (name ...)
                      body1 body2 ...)))
        tag)
      val ...))))


(define-syntax let*
  (syntax-rules ()
    ((let* () body1 body2 ...)
     (let () body1 body2 ...))
    ((let* ((name1 val1) (name2 val2) ...)
       body1 body2 ...)
     (let ((name1 val1))
       (let* ((name2 val2) ...)
         body1 body2 ...)))))

The following ‘letrec’ macro uses the symbol ‘<undefined>’ in place of an expression which returns something that when stored in a location makes it an error to try to obtain the value stored in the location (no such expression is defined in Scheme). A trick is used to generate the temporary names needed to avoid specifying the order in which the values are evaluated. This could also be accomplished by using an auxiliary macro.


(define-syntax letrec
  (syntax-rules ()
    ((letrec ((var1 init1) ...) body ...)
     (letrec "generate temp names"
       (var1 ...)
       ()
       ((var1 init1) ...)
       body ...))
    ((letrec "generate temp names"
       ()
       (temp1 ...)
       ((var1 init1) ...)
       body ...)
     (let ((var1 <undefined>) ...)
       (let ((temp1 init1) ...)
         (set! var1 temp1)
         ...
         body ...)))
    ((letrec "generate temp names"
       (x y ...)
       (temp ...)
       ((var1 init1) ...)
       body ...)
     (letrec "generate temp names"
       (y ...)
       (newtemp temp ...)
       ((var1 init1) ...)
       body ...))))


(define-syntax begin
  (syntax-rules ()
    ((begin exp ...)
     ((lambda () exp ...)))))

The following alternative expansion for ‘begin’ does not make use of the ability to write more than one expression in the body of a lambda expression. In any case, note that these rules apply only if the body of the ‘begin’ contains no definitions.


(define-syntax begin
  (syntax-rules ()
    ((begin exp)
     exp)
    ((begin exp1 exp2 ...)
     (let ((x exp1))
       (begin exp2 ...)))))

The following definition of ‘do’ uses a trick to expand the variable clauses. As with ‘letrec’ above, an auxiliary macro would also work. The expression ‘(if #f #f)’ is used to obtain an unspecific value.


(define-syntax do
  (syntax-rules ()
    ((do ((var init step ...) ...)
         (test expr ...)
         command ...)
     (letrec
       ((loop
         (lambda (var ...)
           (if test
               (begin
                 (if #f #f)
                 expr ...)
               (begin
                 command
                 ...
                 (loop (do "step" var step ...)
                       ...))))))
       (loop init ...)))
    ((do "step" x)
     x)
    ((do "step" x y)
     y)))


Next: , Previous: , Up: top   [Contents][Index]

Notes


Previous: , Up: Notes   [Contents][Index]

Language changes

This section enumerates the changes that have been made to Scheme since the “Revised^4 report” [R4RS] was published.


Next: , Previous: , Up: top   [Contents][Index]

Additional material

The Internet Scheme Repository at

http://www.cs.indiana.edu/scheme-repository/

contains an extensive Scheme bibliography, as well as papers, programs, implementations, and other material related to Scheme.


Next: , Previous: , Up: top   [Contents][Index]

Example

Integrate-system’ integrates the system

y_k^^ = f_k(y_1, y_2, …, y_n), k = 1, …, n

of differential equations with the method of Runge-Kutta.

The parameter system-derivative is a function that takes a system state (a vector of values for the state variables y_1, …, y_n) and produces a system derivative (the values y_1^^, …,y_n^^). The parameter initial-state provides an initial system state, and h is an initial guess for the length of the integration step.

The value returned by ‘integrate-system’ is an infinite stream of system states.


(define integrate-system
  (lambda (system-derivative initial-state h)
    (let ((next (runge-kutta-4 system-derivative h)))
      (letrec ((states
                (cons initial-state
                      (delay (map-streams next
                                          states)))))
        states))))

Runge-Kutta-4’ takes a function, f, that produces a system derivative from a system state. ‘Runge-Kutta-4’ produces a function that takes a system state and produces a new system state.


(define runge-kutta-4
  (lambda (f h)
    (let ((*h (scale-vector h))
          (*2 (scale-vector 2))
          (*1/2 (scale-vector (/ 1 2)))
          (*1/6 (scale-vector (/ 1 6))))
      (lambda (y)
        ;; y is a system state
        (let* ((k0 (*h (f y)))
               (k1 (*h (f (add-vectors y (*1/2 k0)))))
               (k2 (*h (f (add-vectors y (*1/2 k1)))))
               (k3 (*h (f (add-vectors y k2)))))
          (add-vectors y
            (*1/6 (add-vectors k0
                               (*2 k1)
                               (*2 k2)
                               k3))))))))

(define elementwise
  (lambda (f)
    (lambda vectors
      (generate-vector
        (vector-length (car vectors))
        (lambda (i)
          (apply f
                 (map (lambda (v) (vector-ref  v i))
                      vectors)))))))

(define generate-vector
  (lambda (size proc)
    (let ((ans (make-vector size)))
      (letrec ((loop
                (lambda (i)
                  (cond ((= i size) ans)
                        (else
                         (vector-set! ans i (proc i))
                         (loop (+ i 1)))))))
        (loop 0)))))

(define add-vectors (elementwise +))

(define scale-vector
  (lambda (s)
    (elementwise (lambda (x) (* x s)))))

Map-streams’ is analogous to ‘map’: it applies its first argument (a procedure) to all the elements of its second argument (a stream).


(define map-streams
  (lambda (f s)
    (cons (f (head s))
          (delay (map-streams f (tail s))))))

Infinite streams are implemented as pairs whose car holds the first element of the stream and whose cdr holds a promise to deliver the rest of the stream.


(define head car)
(define tail
  (lambda (stream) (force (cdr stream))))







The following illustrates the use of ‘integrate-system’ in integrating the system

C dv_C / dt = -i_L - v_C / R
L di_L / dt = v_C

which models a damped oscillator.


(define damped-oscillator
  (lambda (R L C)
    (lambda (state)
      (let ((Vc (vector-ref state 0))
            (Il (vector-ref state 1)))
        (vector (- 0 (+ (/ Vc (* R C)) (/ Il C)))
                (/ Vc L))))))

(define the-states
  (integrate-system
     (damped-oscillator 10000 1000 .001)
     '#(1 0)
     .01))


Next: , Previous: , Up: top   [Contents][Index]

Bibliography


Previous: , Up: top   [Contents][Index]

Alphabetic index of definitions of concepts, keywords, and procedures

The principal entry for each term, procedure, or keyword is listed first, separated from the other entries by a semicolon.







Concepts

Jump to:   '   ,   ;   =   `  
B   C   D   E   F   H   I   K   L   M   N   O   P   R   S   T   U   V   W  
Index Entry  Section

'
: Literal expressions

,
,: Quasiquotation
,@: Quasiquotation

;
;: Whitespace and comments

=
=>: Conditional

`
: Quasiquotation

B
backquote: Quasiquotation
binding: Variables; syntactic keywords; and regions
binding construct: Variables; syntactic keywords; and regions
bound: Variables; syntactic keywords; and regions

C
call: Procedure calls
call by need: Delayed evaluation
combination: Procedure calls
comma: Quasiquotation
comment: Whitespace and comments
comment: Lexical structure
constant: Storage model
continuation: Control features

D
define: Definitions
define-syntax: Syntax definitions
definition: Definitions
do: Iteration
dotted pair: Pairs and lists

E
else: Conditional
empty list: Disjointness of types
empty list: Booleans
empty list: Pairs and lists
empty list: Pairs and lists
empty list: Pairs and lists
empty list: Pairs and lists
empty list: Pairs and lists
equivalence predicate: Equivalence predicates
error: Error situations and unspecified behavior
escape procedure: Control features
exact: Equivalence predicates
exactness: Exactness

F
false: Disjointness of types
false: Booleans
false: Booleans

H
hygienic: Macros

I
identifier: Identifiers
identifier: Variables; syntactic keywords; and regions
identifier: Symbols
identifier: Lexical structure
immutable: Storage model
implementation restriction: Error situations and unspecified behavior
implementation restriction: Implementation restrictions
improper list: Pairs and lists
inexact: Equivalence predicates
initial environment: Standard procedures
internal definition: Internal definitions

K
keyword: Macros
keyword: Macros
keyword: Lexical structure

L
lazy evaluation: Delayed evaluation
library: Primitive; library; and optional features
library procedure: Standard procedures
location: Storage model

M
macro: Macros
macro keyword: Macros
macro transformer: Macros
macro use: Macros
mutable: Storage model

N
number: Numbers
numerical types: Numerical types

O
object: Semantics
optional: Primitive; library; and optional features

P
pair: Pairs and lists
port: Ports
predicate: Equivalence predicates
procedure call: Procedure calls
promise: Delayed evaluation
promise: Control features
proper tail recursion: Proper tail recursion

R
referentially transparent: Macros
region: Variables; syntactic keywords; and regions
region: Assignments
region: Binding constructs
region: Binding constructs
region: Binding constructs
region: Binding constructs
region: Iteration

S
simplest rational: Numerical operations
syntactic keyword: Identifiers
syntactic keyword: Variables; syntactic keywords; and regions
syntactic keyword: Macros
syntactic keyword: Lexical structure
syntax definition: Syntax definitions

T
tail call: Proper tail recursion
token: Lexical structure
top level environment: Variables; syntactic keywords; and regions
top level environment: Standard procedures
true: Disjointness of types
true: Conditionals
true: Conditional
true: Booleans
type: Disjointness of types

U
unbound: Variables; syntactic keywords; and regions
unbound: Variable references
unbound: Top level definitions
unspecified: Error situations and unspecified behavior

V
valid indexes: Strings
valid indexes: Vectors
variable: Identifiers
variable: Variables; syntactic keywords; and regions
variable: Variable references
variable: Lexical structure

W
Whitespace: Whitespace and comments

Jump to:   '   ,   ;   =   `  
B   C   D   E   F   H   I   K   L   M   N   O   P   R   S   T   U   V   W  

Procedures

Jump to:     '   *   +   -   /   <   =   >   `  
A   B   C   D   E   F   G   I   L   M   N   O   P   Q   R   S   T   V   W   Z  
Index Entry  Section

         …: Pairs and lists

'
'<datum>: Literal expressions

*
*: Numerical operations

+
+: Numerical operations

-
-: Numerical operations
-: Numerical operations
-: Numerical operations

/
/: Numerical operations
/: Numerical operations
/: Numerical operations

<
<: Numerical operations
<=: Numerical operations
<constant>: Literal expressions
<operator>: Procedure calls
<variable>: Variable references

=
=: Numerical operations

>
>: Numerical operations
>=: Numerical operations

`
`<qq template>: Quasiquotation

A
abs: Numerical operations
acos: Numerical operations
and: Conditional
angle: Numerical operations
append: Pairs and lists
apply: Control features
asin: Numerical operations
assoc: Pairs and lists
assq: Pairs and lists
assv: Pairs and lists
atan: Numerical operations
atan: Numerical operations

B
begin: Sequencing
boolean?: Booleans

C
caar: Pairs and lists
cadr: Pairs and lists
call-with-current-continuation: Control features
call-with-input-file: Ports
call-with-output-file: Ports
call-with-values: Control features
car: Pairs and lists
case: Conditional
cdddar: Pairs and lists
cddddr: Pairs and lists
cdr: Pairs and lists
ceiling: Numerical operations
char->integer: Characters
char-alphabetic?: Characters
char-ci<=?: Characters
char-ci<?: Characters
char-ci=?: Characters
char-ci>=?: Characters
char-ci>?: Characters
char-downcase: Characters
char-lower-case?: Characters
char-numeric?: Characters
char-ready?: Input
char-ready?: Input
char-upcase: Characters
char-upper-case?: Characters
char-whitespace?: Characters
char<=?: Characters
char<?: Characters
char=?: Characters
char>=?: Characters
char>?: Characters
char?: Characters
close-input-port: Ports
close-output-port: Ports
complex?: Numerical operations
cond: Conditional
cons: Pairs and lists
cos: Numerical operations
current-input-port: Ports
current-output-port: Ports

D
delay: Delayed evaluation
denominator: Numerical operations
display: Output
display: Output
do: Iteration
dynamic-wind: Control features

E
eof-object?: Input
eq?: Equivalence predicates
equal?: Equivalence predicates
eqv?: Equivalence predicates
eval: Eval
even?: Numerical operations
exact->inexact: Numerical operations
exact?: Numerical operations
exp: Numerical operations
expt: Numerical operations

F
floor: Numerical operations
for-each: Control features
force: Control features

G
gcd: Numerical operations

I
if: Conditionals
if: Conditionals
imag-part: Numerical operations
inexact->exact: Numerical operations
inexact?: Numerical operations
input-port?: Ports
integer->char: Characters
integer?: Numerical operations
interaction-environment: Eval

L
lambda: Procedures
lcm: Numerical operations
length: Pairs and lists
let: Binding constructs
let: Iteration
let*: Binding constructs
let-syntax: Binding constructs for syntactic keywords
letrec: Binding constructs
letrec-syntax: Binding constructs for syntactic keywords
list: Pairs and lists
list->string: Strings
list->vector: Vectors
list-ref: Pairs and lists
list-tail: Pairs and lists
list?: Pairs and lists
load: System interface
log: Numerical operations

M
magnitude: Numerical operations
make-polar: Numerical operations
make-rectangular: Numerical operations
make-string: Strings
make-string: Strings
make-vector: Entry format
make-vector: Entry format
make-vector: Vectors
make-vector: Vectors
map: Control features
max: Numerical operations
member: Pairs and lists
memq: Pairs and lists
memv: Pairs and lists
min: Numerical operations
modulo: Numerical operations

N
negative?: Numerical operations
newline: Output
newline: Output
not: Booleans
null-environment: Eval
null?: Pairs and lists
number->string: Numerical input and output
number->string: Numerical input and output
number?: Numerical operations
numerator: Numerical operations

O
odd?: Numerical operations
open-input-file: Ports
open-output-file: Ports
or: Conditional
output-port?: Ports

P
pair?: Pairs and lists
peek-char: Input
peek-char: Input
positive?: Numerical operations
procedure?: Control features

Q
quasiquote: Quasiquotation
quote: Literal expressions
quotient: Numerical operations

R
rational?: Numerical operations
rationalize: Numerical operations
read: Input
read: Input
read-char: Input
read-char: Input
real-part: Numerical operations
real?: Numerical operations
remainder: Numerical operations
reverse: Pairs and lists
round: Numerical operations

S
scheme-report-environment: Eval
set!: Assignments
set-car!: Pairs and lists
set-cdr!: Pairs and lists
sin: Numerical operations
sqrt: Numerical operations
string: Strings
string->list: Strings
string->number: Numerical input and output
string->number: Numerical input and output
string->symbol: Symbols
string-append: Strings
string-ci<=?: Strings
string-ci<?: Strings
string-ci=?: Strings
string-ci>=?: Strings
string-ci>?: Strings
string-copy: Strings
string-fill!: Strings
string-length: Strings
string-ref: Strings
string-set!: Strings
string<=?: Strings
string<?: Strings
string=?: Strings
string>=?: Strings
string>?: Strings
string?: Strings
substring: Strings
symbol->string: Symbols
symbol?: Symbols
syntax-rules: Pattern language

T
tan: Numerical operations
template: Entry format
template: Entry format
transcript-off: System interface
transcript-on: System interface
truncate: Numerical operations

V
values: Control features
vector: Vectors
vector->list: Vectors
vector-fill!: Vectors
vector-length: Vectors
vector-ref: Entry format
vector-ref: Vectors
vector-set!: Vectors
vector?: Vectors

W
with-input-from-file: Ports
with-output-to-file: Ports
write: Output
write: Output
write-char: Output
write-char: Output

Z
zero?: Numerical operations

Jump to:     '   *   +   -   /   <   =   >   `  
A   B   C   D   E   F   G   I   L   M   N   O   P   Q   R   S   T   V   W   Z  

Table of Contents