[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

A.5 Support for Traditional Configuration Files.

(This message will disappear, once this node revised.)

Within the new configuration system, the traditional ``trio'' ‘hints-huntgroups-users’ will be translated to the following program:

 
(defprog main
 (CALL hints)
 (CALL huntgroups)
 (COND "request_code() == Access-Request"
       (CALL users))
 (REPLY Access-Reject
        (Reply-Message . "\nAccess denied\n")))

For example, consider the following configuration:

 
# raddb/hints:
DEFAULT Prefix = "PPP" Hint = PPP

This will produce the following program:

 
(defprog hints
 (COND "%[Prefix] == \"PPP\"")
       (ACTION "%[Hint] = \"PPP\""))
 
#raddb/huntgroups
DEFAULT NAS-IP-Address = 10.10.4.1      Suffix = "staff"
DEFAULT NAS-IP-Address = 10.10.4.2      Huntgroup-Name = "second"

Will produce

 
(defprog huntgroups
 (COND "%[NAS-IP-Address] == 10.10.4.1 && !(%[Suffix] == \"staff\")"
       (REPLY Access-Reject
              ("Reply-Message" . "Access Denied by Huntgroup")))
 (COND "%[NAS-IP-Address] == 10.10.4.2"
       (ACTION "%[Huntgroup-Name] = \"second\"")))

Finally, ‘users’:

 
#raddb/users
DEFAULT Hint = "PPP",
               Auth-Type = PAM
        Service-Type = Framed-User,
               Framed-Protocol = PPP

DEFAULT Huntgroup-Name = "second",
               Auth-Type = PAM
        Service-Type = "Authenticate-Only",
               Reply-Message = "Authentity Confirmed"

will produce

 
(defprog users
 (COND "%[Hint] == "PPP" && authorize(PAM)"
       (REPLY Access-Accept
             (Service-Type . Framed-User)
             (Framed-Protocol . PPP))
       (REPLY Access-Reject
             (Reply-Message . "Access Denied")))
 (COND "%[Huntgroup-Name] == \"second\" && authorize(PAM)"
       (REPLY Access-Accept
              (Service-Type . "Authenticate-Only")
              (Reply-Message . "Authentity Confirmed"))))

[ < ] [ > ]   [ << ] [ Up ] [ >> ]

This document was generated by Sergey Poznyakoff on December, 6 2008 using texi2html 1.78.