This file documents GNU automake 1.3 Copyright (C) 1995, 96, 97, 98 Free Software Foundation, Inc. Permission is granted to make and distribute verbatim copies of this manual provided the copyright notice and this permission notice are preserved on all copies. Permission is granted to copy and distribute modified versions of this manual under the conditions for verbatim copying, provided that the entire resulting derived work is distributed under the terms of a permission notice identical to this one. Permission is granted to copy and distribute translations of this manual into another language, under the above conditions for modified versions, except that this permission notice may be stated in a translation approved by the Foundation. GNU Automake ************ This file documents the GNU Automake package for creating GNU Standards-compliant Makefiles from template files. This edition documents version 1.3. 1 Introduction ************** Automake is a tool for automatically generating 'Makefile.in's from files called 'Makefile.am'. Each 'Makefile.am' is basically a series of 'make' macro definitions (with rules being thrown in occasionally). The generated 'Makefile.in's are compliant with the GNU Makefile standards. The GNU Makefile Standards Document (*note (standards)Makefile Conventions::) is long, complicated, and subject to change. The goal of Automake is to remove the burden of Makefile maintenance from the back of the individual GNU maintainer (and put it on the back of the Automake maintainer). The typical Automake input files is simply a series of macro definitions. Each such file is processed to create a 'Makefile.in'. There should generally be one 'Makefile.am' per directory of a project. Automake does constrain a project in certain ways; for instance it assumes that the project uses Autoconf (*note The Autoconf Manual: (autoconf)Top.), and enforces certain restrictions on the 'configure.in' contents. Automake requires 'perl' in order to generate the 'Makefile.in's. However, the distributions created by Automake are fully GNU standards-compliant, and do not require 'perl' in order to be built. Mail suggestions and bug reports for Automake to . 2 General ideas *************** There are a few basic ideas that will help understand how Automake works. 2.1 General Operation ===================== Automake works by reading a 'Makefile.am' and generating a 'Makefile.in'. Certain macros and targets defined in the 'Makefile.am' instruct automake to generate more specialized code; for instances a 'bin_PROGRAMS' macro definition will cause targets for compiling and linking to be generated. The macro definitions and targets in the 'Makefile.am' are copied into the generated file. This allows you to add arbitrary code into the generated 'Makefile.in'. For instance the Automake distribution includes a non-standard 'cvs-dist' target, which the Automake maintainer uses to make distributions from his source control system. Note that GNU make extensions are not recognized by Automake. Using such extensions in a 'Makefile.am' will lead to errors or confusing behavior. Automake tries to group comments with adjoining targets (or variable definitions) in an intelligent way. A target defined in 'Makefile.am' generally overrides any such target of a similar name that would be automatically generated by 'automake'. Although this is a supported feature, it is generally best to avoid making use of it, as sometimes the generated rules are very particular. Similarly, a variable defined in 'Makefile.am' will override any definition of the variable that 'automake' would ordinarily create. This feature is more often useful than the ability to override a target definition. Be warned that many of the variables generated by 'automake' are considered to be for internal use only, and their names might change in future releases. When examining a variable definition, Automake will recursively examine variables referenced in the definition. E.g., if Automake is looking at the content of 'foo_SOURCES' in this snippet xs = a.c b.c foo_SOURCES = c.c $(xs) it would use the files 'a.c', 'b.c', and 'c.c' as the contents of 'foo_SOURCES'. Automake also allows a form of comment which is _not_ copied into the output; all lines beginning with '##' are completely ignored by Automake. It is customary to make the first line of 'Makefile.am' read: ## Process this file with automake to produce Makefile.in 2.2 Depth ========= 'automake' supports three kinds of directory hierarchy: "flat", "shallow", and "deep". A "flat" package is one in which all the files are in a single directory. The 'Makefile.am' for such a package by definition lacks a 'SUBDIRS' macro. An example of such a package is 'termutils'. A "deep" package is one in which all the source lies in subdirectories; the top level directory contains mainly configuration information. GNU cpio is a good example of such a package, as is GNU 'tar'. The top level 'Makefile.am' for a deep package will contain a 'SUBDIRS' macro, but no other macros to define objects which are built. A "shallow" package is one in which the primary source resides in the top-level directory, while various parts (typically libraries) reside in subdirectories. Automake is one such package (as is GNU 'make', which does not currently use 'automake'). 2.3 Strictness ============== While Automake is intended to be used by maintainers of GNU packages, it does make some effort to accommodate those who wish to use it, but do not want to use all the GNU conventions. To this end, Automake supports three levels of "strictness"--the strictness indicating how stringently Automake should check standards conformance. The valid strictness levels are: 'foreign' Automake will check for only those things which are absolutely required for proper operations. For instance, whereas GNU standards dictate the existence of a 'NEWS' file, it will not be required in this mode. The name comes from the fact that Automake is intended to be used for GNU programs; these relaxed rules are not the standard mode of operation. 'gnu' Automake will check--as much as possible--for compliance to the GNU standards for packages. This is the default. 'gnits' Automake will check for compliance to the as-yet-unwritten Gnits standards. These are based on the GNU standards, but are even more detailed. Unless you are a Gnits standards contributor, it is recommended that you avoid this option until such time as the Gnits standard is actually published. For more information on the precise implications of the strictness level, see *Note Gnits::. 2.4 The Uniform Naming Scheme ============================= Automake variables generally follow a uniform naming scheme that makes it easy to decide how programs (and other derived objects) are built, and how they are installed. This scheme also supports 'configure' time determination of what should be built. At 'make' time, certain variables are used to determine which objects are to be built. These variables are called "primary" variables. For instance, the primary variable 'PROGRAMS' holds a list of programs which are to be compiled and linked. A different set of variables is used to decide where the built objects should be installed. These variables are named after the primary variables, but have a prefix indicating which standard directory should be used as the installation directory. The standard directory names are given in the GNU standards (*note (standards)Directory Variables::). Automake extends this list with 'pkglibdir', 'pkgincludedir', and 'pkgdatadir'; these are the same as the non-'pkg' versions, but with '@PACKAGE@' appended. For instance, 'pkglibdir' is defined as '$(datadir)/@PACKAGE@'. For each primary, there is one additional variable named by prepending 'EXTRA_' to the primary name. This variable is used to list objects which may or may not be built, depending on what 'configure' decides. This variable is required because Automake must statically know the entire list of objects to be built in order to generate a 'Makefile.in' that will work in all cases. For instance, 'cpio' decides at configure time which programs are built. Some of the programs are installed in 'bindir', and some are installed in 'sbindir': EXTRA_PROGRAMS = mt rmt bin_PROGRAMS = cpio pax sbin_PROGRAMS = @PROGRAMS@ Defining a primary variable without a prefix (eg 'PROGRAMS') is an error. Note that the common 'dir' suffix is left off when constructing the variable names; thus one writes 'bin_PROGRAMS' and not 'bindir_PROGRAMS'. Not every sort of object can be installed in every directory. Automake will flag those attempts it finds in error. Automake will also diagnose obvious misspellings in directory names. Sometimes the standard directories--even as augmented by Automake-- are not enough. In particular it is sometimes useful, for clarity, to install objects in a subdirectory of some predefined directory. To this end, Automake allows you to extend the list of possible installation directories. A given prefix (eg 'zar') is valid if a variable of the same name with 'dir' appended is defined (eg 'zardir'). For instance, until HTML support is part of Automake, you could use this to install raw HTML documentation: htmldir = $(prefix)/html html_DATA = automake.html The special prefix 'noinst' indicates that the objects in question should not be installed at all. The special prefix 'check' indicates that the objects in question should not be built until the 'make check' command is run. Possible primary names are 'PROGRAMS', 'LIBRARIES', 'LISP', 'SCRIPTS', 'DATA', 'HEADERS', 'MANS', and 'TEXINFOS'. 2.5 How derived variables are named =================================== Sometimes a Makefile variable name is derived from some text the user supplies. For instance program names are rewritten into Makefile macro names. Automake canonicalizes this text, so that it does not have to follow Makefile variable naming rules. All characters in the name except for letters, numbers, and the underscore are turned into underscores when making macro references. E.g., if your program is named 'sniff-glue', the derived variable name would be 'sniff_glue_SOURCES', not 'sniff-glue_SOURCES'. 3 Some example packages *********************** 3.1 A simple example, start to finish ===================================== Let's suppose you just finished writing 'zardoz', a program to make your head float from vortex to vortex. You've been using 'autoconf' to provide a portability framework, but your 'Makefile.in's have been ad-hoc. You want to make them bulletproof, so you turn to 'automake'. The first step is to update your 'configure.in' to include the commands that 'automake' needs. The simplest way to do this is to add an 'AM_INIT_AUTOMAKE' call just after 'AC_INIT': AM_INIT_AUTOMAKE(zardoz, 1.0) Since your program doesn't have any complicating factors (e.g., it doesn't use 'gettext', it doesn't want to build a shared library), you're done with this part. That was easy! Now you must regenerate 'configure'. But to do that, you'll need to tell 'autoconf' how to find the new macro you've used. The easiest way to do this is to use the 'aclocal' program to generate your 'aclocal.m4' for you. But wait... you already have an 'aclocal.m4', because you had to write some hairy macros for your program. 'aclocal' lets you put your own macros into 'acinclude.m4', so simply rename and then run: mv aclocal.m4 acinclude.m4 aclocal autoconf Now it is time to write your 'Makefile.am' for 'zardoz'. 'zardoz' is a user program, so you want to install it where the rest of the user programs go. 'zardoz' also has some Texinfo documentation. Your 'configure.in' script uses 'AC_REPLACE_FUNCS', so you need to link against '@LIBOBJS@'. So here's what you'd write: bin_PROGRAMS = zardoz zardoz_SOURCES = main.c head.c float.c vortex9.c gun.c zardoz_LDADD = @LIBOBJS@ info_TEXINFOS = zardoz.texi Now you can run 'automake --add-missing' to generate your 'Makefile.in' and grab any auxiliary files you might need, and you're done! 3.2 A classic program ===================== 'hello' is renowned for its classic simplicity and versatility. This section shows how Automake could be used with the Hello package. The examples below are from the latest GNU Hello, but all the maintainer-only code has been stripped out, as well as all copyright comments. Of course, GNU Hello is somewhat more featureful than your traditional two-liner. GNU Hello is internationalized, does option processing, and has a manual and a test suite. GNU Hello is a deep package. Here is the 'configure.in' from GNU Hello: dnl Process this file with autoconf to produce a configure script. AC_INIT(src/hello.c) AM_INIT_AUTOMAKE(hello, 1.3.11) AM_CONFIG_HEADER(config.h) dnl Set of available languages. ALL_LINGUAS="de fr es ko nl no pl pt sl sv" dnl Checks for programs. AC_PROG_CC AC_ISC_POSIX dnl Checks for libraries. dnl Checks for header files. AC_STDC_HEADERS AC_HAVE_HEADERS(string.h fcntl.h sys/file.h sys/param.h) dnl Checks for library functions. AC_FUNC_ALLOCA dnl Check for st_blksize in struct stat AC_ST_BLKSIZE dnl internationalization macros AM_GNU_GETTEXT AC_OUTPUT([Makefile doc/Makefile intl/Makefile po/Makefile.in \ src/Makefile tests/Makefile tests/hello], [chmod +x tests/hello]) The 'AM_' macros are provided by Automake (or the Gettext library); the rest are standard Autoconf macros. The top-level 'Makefile.am': EXTRA_DIST = BUGS ChangeLog.O SUBDIRS = doc intl po src tests As you can see, all the work here is really done in subdirectories. The 'po' and 'intl' directories are automatically generated using 'gettextize'; they will not be discussed here. In 'doc/Makefile.am' we see: info_TEXINFOS = hello.texi hello_TEXINFOS = gpl.texi This is sufficient to build, install, and distribute the Hello manual. Here is 'tests/Makefile.am': TESTS = hello EXTRA_DIST = hello.in testdata The script 'hello' is generated by 'configure', and is the only test case. 'make check' will run this test. Last we have 'src/Makefile.am', where all the real work is done: bin_PROGRAMS = hello hello_SOURCES = hello.c version.c getopt.c getopt1.c getopt.h system.h hello_LDADD = @INTLLIBS@ @ALLOCA@ localedir = $(datadir)/locale INCLUDES = -I../intl -DLOCALEDIR=\"$(localedir)\" 3.3 Building etags and ctags ============================ Here is another, trickier example. It shows how to generate two programs ('ctags' and 'etags') from the same source file ('etags.c'). The difficult part is that each compilation of 'etags.c' requires different 'cpp' flags. bin_PROGRAMS = etags ctags ctags_SOURCES = ctags_LDADD = ctags.o etags.o: etags.c $(COMPILE) -DETAGS_REGEXPS -c etags.c ctags.o: etags.c $(COMPILE) -DCTAGS -o ctags.o -c etags.c Note that 'ctags_SOURCES' is defined to be empty--that way no implicit value is substituted. The implicit value, however, is used to generate 'etags' from 'etags.o'. 'ctags_LDADD' is used to get 'ctags.o' into the link line. 'ctags_DEPENDENCIES' is generated by Automake. The above rules won't work if your compiler doesn't accept both '-c' and '-o'. The simplest fix for this is to introduce a bogus dependency (to avoid problems with a parallel 'make'): etags.o: etags.c ctags.o $(COMPILE) -DETAGS_REGEXPS -c etags.c ctags.o: etags.c $(COMPILE) -DCTAGS -c etags.c && mv etags.o ctags.o Also, these explicit rules do not work if the de-ANSI-fication feature is used; supporting that requires a little more work: etags._o: etags._c ctags.o $(COMPILE) -DETAGS_REGEXPS -c etags.c ctags._o: etags._c $(COMPILE) -DCTAGS -c etags.c && mv etags._o ctags.o 4 Creating a 'Makefile.in' ************************** To create all the 'Makefile.in's for a package, run the 'automake' program in the top level directory, with no arguments. 'automake' will automatically find each appropriate 'Makefile.am' (by scanning 'configure.in'; *note configure::) and generate the corresponding 'Makefile.in'. Note that 'automake' has a rather simplistic view of what constitutes a package; it assumes that a package has only one 'configure.in', at the top. If your package has multiple 'configure.in's, then you must run 'automake' in each directory holding a 'configure.in'. You can optionally give 'automake' an argument; '.am' is appended to the argument and the result is used as the name of the input file. This feature is generally only used to automatically rebuild an out-of-date 'Makefile.in'. Note that 'automake' must always be run from the topmost directory of a project, even if being used to regenerate the 'Makefile.in' in some subdirectory. This is necessary because 'automake' must scan 'configure.in', and because 'automake' uses the knowledge that a 'Makefile.in' is in a subdirectory to change its behavior in some cases. 'automake' accepts the following options: '-a' '--add-missing' Automake requires certain common files to exist in certain situations; for instance 'config.guess' is required if 'configure.in' runs 'AC_CANONICAL_HOST'. Automake is distributed with several of these files; this option will cause the missing ones to be automatically added to the package, whenever possible. In general if Automake tells you a file is missing, try using this option. '--amdir=DIR' Look for Automake data files in directory DIR instead of in the installation directory. This is typically used for debugging. '--build-dir=DIR' Tell Automake where the build directory is. This option is used when including dependencies into a 'Makefile.in' generated by 'make dist'; it should not be used otherwise. '--cygnus' Causes the generated 'Makefile.in's to follow Cygnus rules, instead of GNU or Gnits rules. *Note Cygnus:: for more information. '--foreign' Set the global strictness to 'foreign'. *Note Strictness:: for more information. '--gnits' Set the global strictness to 'gnits'. *Note Gnits:: for more information. '--gnu' Set the global strictness to 'gnu'. *Note Gnits:: for more information. This is the default strictness. '--help' Print a summary of the command line options and exit. '-i' '--include-deps' Include all automatically generated dependency information (*note Dependencies::) in the generated 'Makefile.in'. This is generally done when making a distribution; see *note Dist::. '--generate-deps' Generate a file concatenating all automatically generated dependency information (*note Dependencies::) into one file, '.dep_segment'. This is generally done when making a distribution; see *note Dist::. It is useful when maintaining a 'SMakefile' or makefiles for other platforms ('Makefile.DOS', etc.) It can only be used in conjunction with '--include-deps', '--srcdir-name', and '--build-dir'. Note that if this option is given, no other processing is done. '--no-force' Ordinarily 'automake' creates all 'Makefile.in's mentioned in 'configure.in'. This option causes it to only update those 'Makefile.in's which are out of date with respect to one of their dependents. '-o DIR' '--output-dir=DIR' Put the generated 'Makefile.in' in the directory DIR. Ordinarily each 'Makefile.in' is created in the directory of the corresponding 'Makefile.am'. This option is used when making distributions. '--srcdir-name=DIR' Tell Automake the name of the source directory associated with the current build. This option is used when including dependencies into a 'Makefile.in' generated by 'make dist'; it should not be used otherwise. '-v' '--verbose' Cause Automake to print information about which files are being read or created. '--version' Print the version number of Automake and exit. 5 Scanning 'configure.in' ************************* Automake scans the package's 'configure.in' to determine certain information about the package. Some 'autoconf' macros are required and some variables must be defined in 'configure.in'. Automake will also use information from 'configure.in' to further tailor its output. Automake also supplies some 'autoconf' macros to make the maintenance easier. These macros can automatically be put into your 'aclocal.m4' using the 'aclocal' program. 5.1 Configuration requirements ============================== The simplest way to meet the basic Automake requirements is to use the macro 'AM_INIT_AUTOMAKE' (*note Macros::). But if you prefer, you can do the required steps by hand: * Define the variables 'PACKAGE' and 'VERSION' with 'AC_SUBST'. 'PACKAGE' should be the name of the package as it appears when bundled for distribution. For instance, Automake defines 'PACKAGE' to be 'automake'. 'VERSION' should be the version number of the release that is being developed. We recommend that you make 'configure.in' the only place in your package where the version number is defined; this makes releases simpler. Automake doesn't do any interpretation of 'PACKAGE' or 'VERSION', except in 'Gnits' mode (*note Gnits::). * Use the macro 'AC_ARG_PROGRAM' if a program or script is installed. * Use 'AC_PROG_MAKE_SET' if the package is not flat. * Use 'AM_SANITY_CHECK' to make sure the build environment is sane. * Use 'AM_PROG_INSTALL' if any scripts (*note Scripts::) are installed by the package. Otherwise, use 'AC_PROG_INSTALL'. * Use 'AM_MISSING_PROG' to see whether the programs 'aclocal', 'autoconf', 'automake', 'autoheader', and 'makeinfo' are in the build environment. Here is how this is done: missing_dir=`cd $ac_aux_dir && pwd` AM_MISSING_PROG(ACLOCAL, aclocal, $missing_dir) AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir) AM_MISSING_PROG(AUTOMAKE, automake, $missing_dir) AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir) AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir) Here are the other macros which Automake requires but which are not run by 'AM_INIT_AUTOMAKE': 'AC_OUTPUT' Automake uses this to determine which files to create. Listed files named 'Makefile' are treated as 'Makefile's. Other listed files are treated differently. Currently the only difference is that a 'Makefile' is removed by 'make distclean', while other files are removed by 'make clean'. 5.2 Other things Automake recognizes ==================================== Automake will also recognize the use of certain macros and tailor the generated 'Makefile.in' appropriately. Currently recognized macros and their effects are: 'AC_CONFIG_HEADER' Automake requires the use of 'AM_CONFIG_HEADER', which is similar to 'AC_CONFIG_HEADER' but does some useful Automake-specific work. 'AC_CONFIG_AUX_DIR' Automake will look for various helper scripts, such as 'mkinstalldirs', in the directory named in this macro invocation. If not seen, the scripts are looked for in their "standard" locations (either the top source directory, or in the source directory corresponding to the current 'Makefile.am', whichever is appropriate). FIXME: give complete list of things looked for in this directory 'AC_PATH_XTRA' Automake will insert definitions for the variables defined by 'AC_PATH_XTRA' into each 'Makefile.in' that builds a C program or library. 'AC_CANONICAL_HOST' 'AC_CHECK_TOOL' Automake will ensure that 'config.guess' and 'config.sub' exist. Also, the 'Makefile' variables 'host_alias' and 'host_triplet' are introduced. 'AC_CANONICAL_SYSTEM' This is similar to 'AC_CANONICAL_HOST', but also defines the 'Makefile' variables 'build_alias' and 'target_alias'. 'AC_FUNC_ALLOCA' 'AC_FUNC_GETLOADAVG' 'AC_FUNC_MEMCMP' 'AC_STRUCT_ST_BLOCKS' 'AC_FUNC_FNMATCH' 'AM_FUNC_STRTOD' 'AC_REPLACE_FUNCS' 'AC_REPLACE_GNU_GETOPT' 'AM_WITH_REGEX' Automake will ensure that the appropriate dependencies are generated for the objects corresponding to these macros. Also, Automake will verify that the appropriate source files are part of the distribution. Note that Automake does not come with any of the C sources required to use these macros, so 'automake -a' will not install the sources. *Note A Library:: for more information. 'LIBOBJS' Automake will detect statements which put '.o' files into 'LIBOBJS', and will treat these additional files as if they were discovered via 'AC_REPLACE_FUNCS'. 'AC_PROG_RANLIB' This is required if any libraries are built in the package. 'AC_PROG_CXX' This is required if any C++ source is included. 'AM_PROG_LIBTOOL' Automake will turn on processing for 'libtool' (*note The Libtool Manual: (libtool)Top.). 'AC_PROG_YACC' If a Yacc source file is seen, then you must either use this macro or define the variable 'YACC' in 'configure.in'. The former is preferred. 'AC_DECL_YYTEXT' This macro is required if there is Lex source in the package. 'AC_PROG_LEX' If a Lex source file is seen, then this macro must be used. 'ALL_LINGUAS' If Automake sees that this variable is set in 'configure.in', it will check the 'po' directory to ensure that all the named '.po' files exist, and that all the '.po' files that exist are named. 'AM_C_PROTOTYPES' This is required when using automatic de-ANSI-fication, see *note ANSI::. 'AM_GNU_GETTEXT' This macro is required for packages which use GNU gettext (*note gettext::). It is distributed with gettext. If Automake sees this macro it ensures that the package meets some of gettext's requirements. 'AM_MAINTAINER_MODE' This macro adds a '--enable-maintainer-mode' option to 'configure'. If this is used, 'automake' will cause "maintainer-only" rules to be turned off by default in the generated 'Makefile.in's. This macro is disallowed in 'Gnits' mode (*note Gnits::). 'AC_SUBST' 'AC_CHECK_TOOL' 'AC_CHECK_PROG' 'AC_CHECK_PROGS' 'AC_PATH_PROG' 'AC_PATH_PROGS' For each of these macros, the first argument is automatically defined as a variable in each generated 'Makefile.in'. 5.3 Auto-generating aclocal.m4 ============================== Automake includes a number of Autoconf macros which can be used in your package; some of them are actually required by Automake in certain situations. These macros must be defined in your 'aclocal.m4'; otherwise they will not be seen by 'autoconf'. The 'aclocal' program will automatically generate 'aclocal.m4' files based on the contents of 'configure.in'. This provides a convenient way to get Automake-provided macros, without having to search around. Also, the 'aclocal' mechanism is extensible for use by other packages. At startup, 'aclocal' scans all the '.m4' files it can find, looking for macro definitions. Then it scans 'configure.in'. Any mention of one of the macros found in the first step causes that macro, and any macros it in turn requires, to be put into 'aclocal.m4'. The contents of 'acinclude.m4', if it exists, are also automatically included in 'aclocal.m4'. This is useful for incorporating local macros into 'configure'. 'aclocal' accepts the following options: '--acdir=DIR' Look for the macro files in DIR instead of the installation directory. This is typically used for debugging. '--help' Print a summary of the command line options and exit. '-I DIR' Add the directory DIR to the list of directories searched for '.m4' files. '--output=FILE' Cause the output to be put into FILE instead of 'aclocal.m4'. '--print-ac-dir' Prints the name of the directory which 'aclocal' will search to find the 'm4' files. When this option is given, normal processing is suppressed. This option can be used by a package to determine where to install a macro file. '--verbose' Print the names of the files it examines. '--version' Print the version number of Automake and exit. 5.4 Autoconf macros supplied with Automake ========================================== 'AM_CONFIG_HEADER' Automake will generate rules to automatically regenerate the config header. If you do use this macro, you must create the file 'stamp-h.in' in your source directory. It can be empty. 'AM_CYGWIN32' Check to see if this 'configure' is being run in the 'Cygwin32' environment. (FIXME xref). If so, define output variable 'EXEEXT' to '.exe'; otherwise define it to the empty string. Automake recognizes this macro and uses it to generate 'Makefile.in's which will automatically work under 'Cygwin32'. In the 'Cygwin32' environment, 'gcc' generates executables whose names end in '.exe', even if this was not specified on the command line. Automake adds special code to 'Makefile.in' to gracefully deal with this. 'AM_FUNC_STRTOD' If the 'strtod' function is not available, or does not work correctly (like the one on SunOS 5.4), add 'strtod.o' to output variable 'LIBOBJS'. 'AM_FUNC_ERROR_AT_LINE' If the function 'error_at_line' is not found, then add 'error.o' to 'LIBOBJS'. 'AM_FUNC_MKTIME' Check for a working 'mktime' function. If not found, add 'mktime.o' to 'LIBOBJS'. 'AM_FUNC_OBSTACK' Check for the GNU obstacks code; if not found, add 'obstack.o' to 'LIBOBJS'. 'AM_C_PROTOTYPES' Check to see if function prototypes are understood by the compiler. If so, define 'PROTOTYPES' and set the output variables 'U' and 'ANSI2KNR' to the empty string. Otherwise, set 'U' to '_' and 'ANSI2KNR' to './ansi2knr'. Automake uses these values to implement automatic de-ANSI-fication. 'AM_HEADER_TIOCGWINSZ_NEEDS_SYS_IOCTL' If the use of 'TIOCGWINSZ' requires '', then define 'GWINSZ_IN_SYS_IOCTL'. Otherwise 'TIOCGWINSZ' can be found in ''. 'AM_INIT_AUTOMAKE' Runs many macros that most 'configure.in''s need. This macro has two required arguments, the package and the version number. By default this macro 'AC_DEFINE''s 'PACKAGE' and 'VERSION'. This can be avoided by passing in a non-empty third argument. 'AM_PATH_LISPDIR' Searches for the program 'emacs', and, if found, sets the output variable 'lispdir' to the full path to Emacs' site-lisp directory. 'AM_PROG_CC_STDC' If the C compiler in not in ANSI C mode by default, try to add an option to output variable 'CC' to make it so. This macro tries various options that select ANSI C on some system or another. It considers the compiler to be in ANSI C mode if it handles function prototypes correctly. If you use this macro, you should check after calling it whether the C compiler has been set to accept ANSI C; if not, the shell variable 'am_cv_prog_cc_stdc' is set to 'no'. If you wrote your source code in ANSI C, you can make an un-ANSIfied copy of it by using the 'ansi2knr' option. 'AM_PROG_INSTALL' Like 'AC_PROG_INSTALL', but also defines 'INSTALL_SCRIPT'. 'AM_PROG_LEX' Like 'AC_PROG_LEX' with 'AC_DECL_YYTEXT', but uses the 'missing' script on systems that do not have lex. 'HP-UX 10' is one such system. 'AM_SANITY_CHECK' This checks to make sure that a file created in the build directory is newer than a file in the source directory. This can fail on systems where the clock is set incorrectly. This macro is automatically run from 'AM_INIT_AUTOMAKE'. 'AM_SYS_POSIX_TERMIOS' Check to see if POSIX termios headers and functions are available on the system. If so, set the shell variable 'am_cv_sys_posix_termios' to 'yes'. If not, set the variable to 'no'. 'AM_TYPE_PTRDIFF_T' Define 'HAVE_PTRDIFF_T' if the type 'ptrdiff_t' is defined in ''. 'AM_WITH_DMALLOC' Add support for the 'dmalloc' package. If the user configures with '--with-dmalloc', then define 'WITH_DMALLOC' and add '-ldmalloc' to 'LIBS'. The 'dmalloc' package can be found at 'AM_WITH_REGEX' Adds '--with-regex' to the 'configure' command line. If specified (the default), then the 'regex' regular expression library is used, 'regex.o' is put into 'LIBOBJS', and 'WITH_REGEX' is defined.. If '--without-regex' is given, then the 'rx' regular expression library is used, and 'rx.o' is put into 'LIBOBJS'. 5.5 Writing your own aclocal macros =================================== Aclocal doesn't have any built-in knowledge of any macros, so it is easy to extend it with your own macros. This is mostly used for libraries which want to supply their own Autoconf macros for use by other programs. For instance the 'gettext' library supplies a macro 'AM_GNU_GETTEXT' which should be used by any package using 'gettext'. When the library is installed, it installs this macro so that 'aclocal' will find it. A file of macros should be a series of 'AC_DEFUN''s. Aclocal also understands 'AC_REQUIRE', so it is safe to put each macro in a separate file. A macro file's name should end in '.m4'. Such files should be installed in '$(datadir)/aclocal'. 6 The top-level 'Makefile.am' ***************************** In non-flat packages, the top level 'Makefile.am' must tell Automake which subdirectories are to be built. This is done via the 'SUBDIRS' variable. The 'SUBDIRS' macro holds a list of subdirectories in which building of various sorts can occur. Many targets (eg 'all') in the generated 'Makefile' will run both locally and in all specified subdirectories. Note that the directories listed in 'SUBDIRS' are not required to contain 'Makefile.am's; only 'Makefile's (after configuration). This allows inclusion of libraries from packages which do not use Automake (such as 'gettext'). The directories mentioned in 'SUBDIRS' must be direct children of the current directory. For instance, you cannot put 'src/subdir' into 'SUBDIRS'. In a deep package, the top-level 'Makefile.am' is often very short. For instance, here is the 'Makefile.am' from the Hello distribution: EXTRA_DIST = BUGS ChangeLog.O README-alpha SUBDIRS = doc intl po src tests It is possible to override the 'SUBDIRS' variable if, like in the case of GNU 'Inetutils', you want to only build a subset of the entire package. In your 'Makefile.am' include: SUBDIRS = @SUBDIRS@ Then in your 'configure.in' you can specify: SUBDIRS = "src doc lib po" AC_SUBST(SUBDIRS) The upshot of this is that automake is tricked into building the package to take the subdirs, but doesn't actually bind that list until 'configure' is run. 'SUBDIRS' can contain configure substitutions (eg '@DIRS@'); Automake itself does not actually examine the contents of this variable. If 'SUBDIRS' is defined, then your 'configure.in' must include 'AC_PROG_MAKE_SET'. The use of 'SUBDIRS' is not restricted to just the top-level 'Makefile.am'. Automake can be used to construct packages of arbitrary depth. 7 Building Programs and Libraries ********************************* A large part of Automake's functionality is dedicated to making it easy to build C programs and libraries. 7.1 Building a program ====================== In a directory containing source that gets built into a program (as opposed to a library), the 'PROGRAMS' primary is used. Programs can be installed in 'bindir', 'sbindir', 'libexecdir', 'pkglibdir', or not at all ('noinst'). For instance: bin_PROGRAMS = hello In this simple case, the resulting 'Makefile.in' will contain code to generate a program named 'hello'. The variable 'hello_SOURCES' is used to specify which source files get built into an executable: hello_SOURCES = hello.c version.c getopt.c getopt1.c getopt.h system.h This causes each mentioned '.c' file to be compiled into the corresponding '.o'. Then all are linked to produce 'hello'. If 'prog_SOURCES' is needed, but not specified, then it defaults to the single file 'prog.c'. In the example above, the definition of 'hello_SOURCES' is actually redundant. Multiple programs can be built in a single directory. Multiple programs can share a single source file. The source file must be listed in each '_SOURCES' definition. Header files listed in a '_SOURCES' definition will be included in the distribution but otherwise ignored. In case it isn't obvious, you should not include the header file generated by 'configure' in an '_SOURCES' variable; this file should not be distributed. Lex ('.l') and yacc ('.y') files can also be listed; see *note Yacc and Lex::. Automake must know all the source files that could possibly go into a program, even if not all the files are built in every circumstance. Any files which are only conditionally built should be listed in the appropriate 'EXTRA_' variable. For instance, if 'hello-linux.c' were conditionally included in 'hello', the 'Makefile.am' would contain: EXTRA_hello_SOURCES = hello-linux.c Similarly, sometimes it is useful to determine the programs that are to be built at configure time. For instance, GNU 'cpio' only builds 'mt' and 'rmt' under special circumstances. In this case, you must notify 'automake' of all the programs that can possibly be built, but at the same time cause the generated 'Makefile.in' to use the programs specified by 'configure'. This is done by having 'configure' substitute values into each '_PROGRAMS' definition, while listing all optionally built programs in 'EXTRA_PROGRAMS'. If you need to link against libraries that are not found by 'configure', you can use 'LDADD' to do so. This variable actually can be used to add any options to the linker command line. Sometimes, multiple programs are built in one directory but do not share the same link-time requirements. In this case, you can use the 'PROG_LDADD' variable (where PROG is the name of the program as it appears in some '_PROGRAMS' variable, and usually written in lowercase) to override the global 'LDADD'. (If this variable exists for a given program, then that program is not linked using 'LDADD'.) For instance, in GNU cpio, 'pax', 'cpio', and 'mt' are linked against the library 'libcpio.a'. However, 'rmt' is built in the same directory, and has no such link requirement. Also, 'mt' and 'rmt' are only built on certain architectures. Here is what cpio's 'src/Makefile.am' looks like (abridged): bin_PROGRAMS = cpio pax @MT@ libexec_PROGRAMS = @RMT@ EXTRA_PROGRAMS = mt rmt LDADD = ../lib/libcpio.a @INTLLIBS@ rmt_LDADD = cpio_SOURCES = ... pax_SOURCES = ... mt_SOURCES = ... rmt_SOURCES = ... 'prog_LDADD' is inappropriate for passing program-specific linker flags (except for '-l' and '-L'). So, use the 'prog_LDFLAGS' variable for this purpose. It is also occasionally useful to have a program depend on some other target which is not actually part of that program. This can be done using the 'prog_DEPENDENCIES' variable. Each program depends on the contents of such a variable, but no further interpretation is done. If 'prog_DEPENDENCIES' is not supplied, it is computed by Automake. The automatically-assigned value is the contents of 'prog_LDADD', with most configure substitutions, '-l', and '-L' options removed. The configure substitutions that are left in are only '@LIBOBJS@' and '@ALLOCA@'; these are left because it is known that they will not cause an invalid value for 'prog_DEPENDENCIES' to be generated. 7.2 Building a library ====================== Building a library is much like building a program. In this case, the name of the primary is 'LIBRARIES'. Libraries can be installed in 'libdir' or 'pkglibdir'. *Note A Shared Library::, for information on how to build shared libraries using Libtool and the 'LTLIBRARIES' primary. Each '_LIBRARIES' variable is a list of the libraries to be built. For instance to create a library named 'libcpio.a', but not install it, you would write: noinst_LIBRARIES = libcpio.a The sources that go into a library are determined exactly as they are for programs, via the '_SOURCES' variables. Note that the library name is canonicalized (*note Canonicalization::), so the '_SOURCES' variable corresponding to 'liblob.a' is 'liblob_a_SOURCES', not 'liblob.a_SOURCES'. Extra objects can be added to a library using the 'library_LIBADD' variable. This should be used for objects determined by 'configure'. Again from cpio: libcpio_a_LIBADD = @LIBOBJS@ @ALLOCA@ 7.3 Special handling for LIBOBJS and ALLOCA =========================================== Automake explicitly recognizes the use of '@LIBOBJS@' and '@ALLOCA@', and uses this information, plus the list of 'LIBOBJS' files derived from 'configure.in' to automatically include the appropriate source files in the distribution (*note Dist::). These source files are also automatically handled in the dependency-tracking scheme, see *Note Dependencies::. '@LIBOBJS@' and '@ALLOCA@' are specially recognized in any '_LDADD' or '_LIBADD' variable. 7.4 Building a Shared Library ============================= Building shared libraries is a relatively complex matter. For this reason, GNU Libtool (*note The Libtool Manual: (libtool)Top.) was created to help build shared libraries in a platform-independent way. Automake uses Libtool to build libraries declared with the 'LTLIBRARIES' primary. Each '_LTLIBRARIES' variable is a list of shared libraries to build. For instance, to create a library named 'libgettext.a' and its corresponding shared libraries, and install them in 'libdir', write: lib_LTLIBRARIES = libgettext.la Note that shared libraries _must_ be installed, so 'noinst_LTLIBRARIES' and 'check_LTLIBRARIES' are not allowed. For each library, the 'library_LIBADD' variable contains the names of extra libtool objects ('.lo' files) to add to the shared library. The 'library_LDFLAGS' variable contains any additional libtool flags, such as '-version-info' or '-static'. Where an ordinary library might include '@LIBOBJS@', a libtool library must use '@LTLIBOBJS@'. This is required because the object files that libtool operates on do not necessarily end in '.o'. The libtool manual contains more details on this topic. For libraries installed in some directory, 'automake' will automatically supply the appropriate '-rpath' option. However, for libraries determined at configure time (and thus mentioned in 'EXTRA_LTLIBRARIES'), 'automake' does not know the eventual installation directory; for such libraries you must add the '-rpath' option to the appropriate '_LDFLAGS' variable by hand. *Note Using Automake with Libtool: (libtool)Using Automake, for more information. 7.5 Variables used when building a program ========================================== Occasionally it is useful to know which 'Makefile' variables Automake uses for compilations; for instance you might need to do your own compilation in some special cases. Some variables are inherited from Autoconf; these are 'CC', 'CFLAGS', 'CPPFLAGS', 'DEFS', 'LDFLAGS', and 'LIBS'. There are some additional variables which Automake itself defines: 'INCLUDES' A list of '-I' options. This can be set in your 'Makefile.am' if you have special directories you want to look in. 'automake' already provides some '-I' options automatically. In particular it generates '-I$(srcdir)' and a '-I' pointing to the directory holding 'config.h' (if you've used 'AC_CONFIG_HEADER' or 'AM_CONFIG_HEADER'). 'INCLUDES' can actually be used for other 'cpp' options besides '-I'. For instance, it is sometimes used to pass arbitrary '-D' options to the compiler. 'COMPILE' This is the command used to actually compile a C source file. The filename is appended to form the complete command line. 'LINK' This is the command used to actually link a C program. 7.6 Yacc and Lex support ======================== Automake has somewhat idiosyncratic support for Yacc and Lex. Automake assumes that the '.c' file generated by yacc (or lex) should be named using the basename of the input file. That is, for a yacc source file 'foo.y', automake will cause the intermediate file to be named 'foo.c' (as opposed to 'y.tab.c', which is more traditional). The extension of a yacc source file is used to determine the extension of the resulting 'C' or 'C++' file. Files with the extension '.y' will be turned into '.c' files; likewise, '.yy' will become '.cc'; '.y++', 'c++'; and '.yxx', '.cxx'. Likewise, lex source files can be used to generate 'C' or 'C++'; the extensions '.l', '.ll', '.l++', and '.lxx' are recognized. You should never explicitly mention the intermediate ('C' or 'C++') file in any 'SOURCES' variable; only list the source file. The intermediate files generated by yacc (or lex) will be included in any distribution that is made. That way the user doesn't need to have yacc or lex. If a yacc source file is seen, then your 'configure.in' must define the variable 'YACC'. This is most easily done by invoking the macro 'AC_PROG_YACC'. Similarly, if a lex source file is seen, then your 'configure.in' must define the variable 'LEX'. You can use 'AC_PROG_LEX' to do this. Automake's lex support also requires that you use the 'AC_DECL_YYTEXT' macro--automake needs to know the value of 'LEX_OUTPUT_ROOT'. Automake makes it possible to include multiple yacc (or lex) source files in a single program. Automake uses a small program called 'ylwrap' to run 'yacc' (or 'lex') in a subdirectory. This is necessary because yacc's output filename is fixed, and a parallel make could conceivably invoke more than one instance of 'yacc' simultaneously. 'ylwrap' is distributed with automake. It should appear in the directory specified by 'AC_CONFIG_AUX_DIR', or the current directory if that macro is not used in 'configure.in'. For 'yacc', simply managing locking is insufficient. 'yacc' output also always uses the same symbol names internally, so it isn't possible to link two 'yacc' parsers into the same executable. We recommend using the following renaming hack used in 'gdb': #define yymaxdepth c_maxdepth #define yyparse c_parse #define yylex c_lex #define yyerror c_error #define yylval c_lval #define yychar c_char #define yydebug c_debug #define yypact c_pact #define yyr1 c_r1 #define yyr2 c_r2 #define yydef c_def #define yychk c_chk #define yypgo c_pgo #define yyact c_act #define yyexca c_exca #define yyerrflag c_errflag #define yynerrs c_nerrs #define yyps c_ps #define yypv c_pv #define yys c_s #define yy_yys c_yys #define yystate c_state #define yytmp c_tmp #define yyv c_v #define yy_yyv c_yyv #define yyval c_val #define yylloc c_lloc #define yyreds c_reds #define yytoks c_toks #define yylhs c_yylhs #define yylen c_yylen #define yydefred c_yydefred #define yydgoto c_yydgoto #define yysindex c_yysindex #define yyrindex c_yyrindex #define yygindex c_yygindex #define yytable c_yytable #define yycheck c_yycheck For each define, replace the 'c_' prefix with whatever you like. These defines work for 'bison', 'byacc', and traditional 'yacc's. If you find a parser generator that uses a symbol not covered here, please report the new name so it can be added to the list. 7.7 C++ and other languages =========================== Automake includes full support for C++, and rudimentary support for other languages. Support for other languages will be improved based on demand. Any package including C++ code must define the output variable 'CXX' in 'configure.in'; the simplest way to do this is to use the 'AC_PROG_CXX' macro. A few additional variables are defined when a C++ source file is seen: 'CXX' The name of the C++ compiler. 'CXXFLAGS' Any flags to pass to the C++ compiler. 'CXXCOMPILE' The command used to actually compile a C++ source file. The file name is appended to form the complete command line. 'CXXLINK' The command used to actually link a C++ program. 7.8 Automatic de-ANSI-fication ============================== Although the GNU standards allow the use of ANSI C, this can have the effect of limiting portability of a package to some older compilers (notably SunOS). Automake allows you to work around this problem on such machines by "de-ANSI-fying" each source file before the actual compilation takes place. If the 'Makefile.am' variable 'AUTOMAKE_OPTIONS' (*note Options::) contains the option 'ansi2knr' then code to handle de-ANSI-fication is inserted into the generated 'Makefile.in'. This causes each C source file in the directory to be treated as ANSI C. If an ANSI C compiler is available, it is used. If no ANSI C compiler is available, the 'ansi2knr' program is used to convert the source files into K&R C, which is then compiled. The 'ansi2knr' program is simple-minded. It assumes the source code will be formatted in a particular way; see the 'ansi2knr' man page for details. De-ANSI-fication support requires the source files 'ansi2knr.c' and 'ansi2knr.1' to be in the same package as the ANSI C source; these files are distributed with Automake. Also, the package 'configure.in' must call the macro 'AM_C_PROTOTYPES'. Automake also handles finding the 'ansi2knr' support files in some other directory in the current package. This is done by prepending the relative path to the appropriate directory to the 'ansi2knr' option. For instance, suppose the package has ANSI C code in the 'src' and 'lib' subdirs. The files 'ansi2knr.c' and 'ansi2knr.1' appear in 'lib'. Then this could appear in 'src/Makefile.am': AUTOMAKE_OPTIONS = ../lib/ansi2knr If no directory prefix is given, the files are assumed to be in the current directory. 7.9 Automatic dependency tracking ================================= As a developer it is often painful to continually update the 'Makefile.in' whenever the include-file dependencies change in a project. 'automake' supplies a way to automatically track dependency changes, and distribute the dependencies in the generated 'Makefile.in'. Currently this support requires the use of GNU 'make' and 'gcc'. It might become possible in the future to supply a different dependency generating program, if there is enough demand. In the meantime, this mode is enabled by default if any C program or library is defined in the current directory, so you may get a 'Must be a separator' error from non-GNU make. When you decide to make a distribution, the 'dist' target will re-run 'automake' with '--include-deps' and other options. This will cause the previously generated dependencies to be inserted into the generated 'Makefile.in', and thus into the distribution. This step also turns off inclusion of the dependency generation code, so that those who download your distribution but don't use GNU 'make' and 'gcc' will not get errors. When added to the 'Makefile.in', the dependencies have all system-specific dependencies automatically removed. This can be done by listing the files in 'OMIT_DEPENDENCIES'. For instance all references to system header files are removed by 'automake'. Sometimes it is useful to specify that a certain header file should be removed. For instance if your 'configure.in' uses 'AM_WITH_REGEX', then any dependency on 'rx.h' or 'regex.h' should be removed, because the correct one cannot be known until the user configures the package. As it turns out, 'automake' is actually smart enough to handle the particular case of the regular expression header. It will also automatically omit 'libintl.h' if 'AM_GNU_GETTEXT' is used. Automatic dependency tracking can be suppressed by putting 'no-dependencies' in the variable 'AUTOMAKE_OPTIONS'. If you unpack a distribution made by 'make dist', and you want to turn on the dependency-tracking code again, simply re-run 'automake'. The actual dependency files are put under the build directory, in a subdirectory named '.deps'. These dependencies are machine specific. It is safe to delete them if you like; they will be automatically recreated during the next build. 8 Other Derived Objects *********************** Automake can handle derived objects which are not C programs. Sometimes the support for actually building such objects must be explicitly supplied, but Automake will still automatically handle installation and distribution. 8.1 Executable Scripts ====================== It is possible to define and install programs which are scripts. Such programs are listed using the 'SCRIPTS' primary name. 'automake' doesn't define any dependencies for scripts; the 'Makefile.am' should include the appropriate rules. 'automake' does not assume that scripts are derived objects; such objects must be deleted by hand; see *note Clean:: for more information. 'automake' itself is a script that is generated at configure time from 'automake.in'. Here is how this is handled: bin_SCRIPTS = automake Since 'automake' appears in the 'AC_OUTPUT' macro, a target for it is automatically generated. Script objects can be installed in 'bindir', 'sbindir', 'libexecdir', or 'pkgdatadir'. 8.2 Header files ================ Header files are specified by the 'HEADERS' family of variables. Generally header files are not installed, so the 'noinst_HEADERS' variable will be the most used. All header files must be listed somewhere; missing ones will not appear in the distribution. Often it is clearest to list uninstalled headers with the rest of the sources for a program. *Note A Program::. Headers listed in a '_SOURCES' variable need not be listed in any '_HEADERS' variable. Headers can be installed in 'includedir', 'oldincludedir', or 'pkgincludedir'. 8.3 Architecture-independent data files ======================================= Automake supports the installation of miscellaneous data files using the 'DATA' family of variables. Such data can be installed in the directories 'datadir', 'sysconfdir', 'sharedstatedir', 'localstatedir', or 'pkgdatadir'. By default, data files are not included in a distribution. Here is how 'automake' installs its auxiliary data files: pkgdata_DATA = clean-kr.am clean.am ... 8.4 Built sources ================= Occasionally a file which would otherwise be called "source" (eg a C '.h' file) is actually derived from some other file. Such files should be listed in the 'BUILT_SOURCES' variable. Built sources are also not compiled by default. You must explicitly mention them in some other '_SOURCES' variable for this to happen. Note that, in some cases, 'BUILT_SOURCES' will work in somewhat suprising ways. In order to get the built sources to work with automatic dependency tracking, the 'Makefile' must depend on '$(BUILT_SOURCES)'. This can cause these sources to be rebuilt at what might seem like funny times. 9 Other GNU Tools ***************** Since Automake is primarily intended to generate 'Makefile.in's for use in GNU programs, it tries hard to interoperate with other GNU tools. 9.1 Emacs Lisp ============== Automake provides some support for Emacs Lisp. The 'LISP' primary is used to hold a list of '.el' files. Possible prefixes for this primary are 'lisp_' and 'noinst_'. Note that if 'lisp_LISP' is defined, then 'configure.in' must run 'AM_PATH_LISPDIR' (*note Macros::). By default Automake will byte-compile all Emacs Lisp source files using the Emacs found by 'AM_PATH_LISPDIR'. If you wish to avoid byte-compiling, simply define the variable 'ELCFILES' to be empty. Byte-compiled Emacs Lisp files are not portable among all versions of Emacs, so it makes sense to turn this off if you expect sites to have more than one version of Emacs installed. Furthermore, many packages don't actually benefit from byte-compilation. Still, we recommand that you leave it enabled by default. It is probably better for sites with strange setups to cope for themselves than to make the installation less nice for everybody else. 9.2 Gettext =========== If 'AM_GNU_GETTEXT' is seen in 'configure.in', then Automake turns on support for GNU gettext, a message catalog system for internationalization (*note (gettext)GNU Gettext::). The 'gettext' support in Automake requires the addition of two subdirectories to the package, 'intl' and 'po'. Automake ensure that these directories exist and are mentioned in 'SUBDIRS'. Furthermore, Automake checks that the definition of 'ALL_LINGUAS' in 'configure.in' corresponds to all the valid '.po' files, and nothing more. 9.3 Guile ========= Automake provides some automatic support for writing Guile modules. Automake will turn on Guile support if the 'AM_INIT_GUILE_MODULE' macro is used in 'configure.in'. Right now Guile support just means that the 'AM_INIT_GUILE_MODULE' macro is understood to mean: * 'AM_INIT_AUTOMAKE' is run. * 'AC_CONFIG_AUX_DIR' is run, with a path of '..'. As the Guile module code matures, no doubt the Automake support will grow as well. 9.4 Libtool =========== Automake provides support for GNU Libtool (*note The Libtool Manual: (libtool)Top.) with the 'LTLIBRARIES' primary. *Note A Shared Library::. 9.5 Java ======== Automake provides some minimal support for Java compilation with the 'JAVA' primary. Any '.java' files listed in a '_JAVA' variable will be compiled with 'JAVAC' at build time. By default, '.class' files are not included in the distribution. Currently Automake enforces the restriction that only one '_JAVA' primary can be used in a given 'Makefile.am'. The reason for this restriction is that, in general, it isn't possible to know which '.class' files were generated from which '.java' files - so it would be impossible to know which files to install where. 10 Building documentation ************************* Currently Automake provides support for Texinfo and man pages. 10.1 Texinfo ============ If the current directory contains Texinfo source, you must declare it with the 'TEXINFOS' primary. Generally Texinfo files are converted into info, and thus the 'info_TEXINFOS' macro is most commonly used here. Note that any Texinfo source file must end in the '.texi' or '.texinfo' extension. If the '.texi' file '@include's 'version.texi', then that file will be automatically generated. 'version.texi' defines three Texinfo macros you can reference: 'EDITION', 'VERSION', and 'UPDATED'. The first two hold the version number of your package (but are kept separate for clarity); the last is the date the primary file was last modified. The 'version.texi' support requires the 'mdate-sh' program; this program is supplied with Automake. Sometimes an info file actually depends on more than one '.texi' file. For instance, in GNU Hello, 'hello.texi' includes the file 'gpl.texi'. You can tell Automake about these dependencies using the 'TEXI_TEXINFOS' variable. Here is how Hello does it: info_TEXINFOS = hello.texi hello_TEXINFOS = gpl.texi By default, Automake requires the file 'texinfo.tex' to appear in the same directory as the Texinfo source. However, if you used 'AC_CONFIG_AUX_DIR' in 'configure.in', then 'texinfo.tex' is looked for there. Automake supplies 'texinfo.tex' if '--add-missing' is given. If your package has Texinfo files in many directories, you can use the variable 'TEXINFO_TEX' to tell automake where to find the canonical 'texinfo.tex' for your package. The value of this variable should be the relative path from the current 'Makefile.am' to 'texinfo.tex': TEXINFO_TEX = ../doc/texinfo.tex The option 'no-texinfo.tex' can be used to eliminate the requirement for 'texinfo.tex'. Use of the variable 'TEXINFO_TEX' is preferable, however, because that allows the 'dvi' target to still work. Automake generates an 'install-info' target; some people apparently use this. By default, info pages are installed by 'make install'. This can be prevented via the 'no-installinfo' option. 10.2 Man pages ============== A package can also include man pages. (Though see the GNU standards on this matter, *note (standards)Man Pages::.) Man pages are declared using the 'MANS' primary. Generally the 'man_MANS' macro is used. Man pages are automatically installed in the correct subdirectory of 'mandir', based on the file extension. By default, man pages are installed by 'make install'. However, since the GNU project does not require man pages, many maintainers do not expend effort to keep the man pages up to date. In these cases, the 'no-installman' option will prevent the man pages from being installed by default. The user can still explicitly install them via 'make install-man'. Here is how the documentation is handled in GNU 'cpio' (which includes both Texinfo documentation and man pages): info_TEXINFOS = cpio.texi man_MANS = cpio.1 mt.1 Texinfo source and info pages are all considered to be source for the purposes of making a distribution. Man pages are not currently considered to be source, because it is not uncommon for man pages to be automatically generated. 11 What Gets Installed ********************** Naturally, Automake handles the details of actually installing your program once it has been built. All 'PROGRAMS', 'SCRIPTS', 'LIBRARIES', 'LISP', 'DATA' and 'HEADERS' are automatically installed in the appropriate places. Automake also handles installing any specified info and man pages. Automake generates separate 'install-data' and 'install-exec' targets, in case the installer is installing on multiple machines which share directory structure--these targets allow the machine-independent parts to be installed only once. The 'install' target depends on both of these targets. Automake also generates an 'uninstall' target, an 'installdirs' target, and an 'install-strip' target. It is possible to extend this mechanism by defining an 'install-exec-local' or 'install-data-local' target. If these targets exist, they will be run at 'make install' time. Variables using the standard directory prefixes 'data', 'info', 'man', 'include', 'oldinclude', 'pkgdata', or 'pkginclude' (eg 'data_DATA') are installed by 'install-data'. Variables using the standard directory prefixes 'bin', 'sbin', 'libexec', 'sysconf', 'localstate', 'lib', or 'pkglib' (eg 'bin_PROGRAMS') are installed by 'install-exec'. Any variable using a user-defined directory prefix with 'exec' in the name (eg 'myexecbin_PROGRAMS' is installed by 'install-exec'. All other user-defined prefixes are installed by 'install-data'. Automake generates support for the 'DESTDIR' variable in all install rules; see *Note (standards)Makefile Conventions::. 12 What Gets Cleaned ******************** The GNU Makefile Standards specify a number of different clean rules. Generally the files that can cleaned are determined automatically by Automake. Of course, Automake also recognizes some variables that can be defined to specify additional files to clean. These variables are 'MOSTLYCLEANFILES', 'CLEANFILES', 'DISTCLEANFILES', and 'MAINTAINERCLEANFILES'. 13 What Goes in a Distribution ****************************** The 'dist' target in the generated 'Makefile.in' can be used to generate a gzip'd 'tar' file for distribution. The tar file is named based on the 'PACKAGE' and 'VERSION' variables; more precisely it is named 'PACKAGE-VERSION.tar.gz'. For the most part, the files to distribute are automatically found by Automake: all source files are automatically included in a distribution, as are all 'Makefile.am's and 'Makefile.in's. Automake also has a built-in list of commonly used files which, if present in the current directory, are automatically included. This list is printed by 'automake --help'. Also, files which are read by 'configure' (ie, the source files corresponding to the files specified in the 'AC_OUTPUT' invocation) are automatically distributed. Still, sometimes there are files which must be distributed, but which are not covered in the automatic rules. These files should be listed in the 'EXTRA_DIST' variable. Note that 'EXTRA_DIST' can only handle files in the current directory; files in other directories will cause 'make dist' runtime failures. If you define 'SUBDIRS', automake will recursively include the subdirectories in the distribution. If 'SUBDIRS' is defined conditionally (*note Conditionals::), automake will normally include all directories that could possibly appear in 'SUBDIRS' in the distribution. If you need to specify the set of directories conditionally, you can set the variable 'DIST_SUBDIRS' to the exact list of subdirectories to include in the distribution. Occasionally it is useful to be able to change the distribution before it is packaged up. If the 'dist-hook' target exists, it is run after the distribution directory is filled, but before the actual tar (or shar) file is created. One way to use this is for distributing files in subdirectories for which a new 'Makefile.am' is overkill: dist-hook: mkdir $(distdir)/random cp -p random/a1 random/a2 $(distdir)/random Automake also generates a 'distcheck' target which can be help to ensure that a given distribution will actually work. 'distcheck' makes a distribution, and then tries to do a 'VPATH' build. 14 Support for test suites ************************** Automake supports a two forms of test suite. If the variable 'TESTS' is defined, its value is taken to be a list of programs to run in order to do the testing. The programs can either be derived objects or source objects; the generated rule will look both in SRCDIR and '.'. Programs needing data files should look for them in SRCDIR (which is both an environment variable and a make variable) so they work when building in a separate directory (*note (autoconf)Build Directories::), and in particular for the 'distcheck' target (*note Dist::). The number of failures will be printed at the end of the run. If a given test program exits with a status of 77, then its result is ignored in the final count. This feature allows non-portable tests to be ignored in environments where they don't make sense. The variable 'TESTS_ENVIRONMENT' can be used to set environment variables for the test run; the environment variable 'srcdir' is set in the rule. If all your test programs are scripts, you can also set 'TESTS_ENVIRONMENT' to an invocation of the shell (eg '$(SHELL) -x'); this can be useful for debugging the tests. If 'dejagnu' appears in 'AUTOMAKE_OPTIONS', then the a 'dejagnu'-based test suite is assumed. The value of the variable 'DEJATOOL' is passed as the '--tool' argument to 'runtest'; it defaults to the name of the package. The variable 'RUNTESTDEFAULTFLAGS' holds the '--tool' and '--srcdir' flags that are passed to dejagnu by default; this can be overridden if necessary. The variables 'EXPECT', 'RUNTEST' and 'RUNTESTFLAGS' can also be overridden to provide project-specific values. For instance, you will need to do this if you are testing a compiler toolchain, because the default values do not take into account host and target names. In either case, the testing is done via 'make check'. 15 Changing Automake's Behavior ******************************* Various features of Automake can be controlled by options in the 'Makefile.am'. Such options are listed in a special variable named 'AUTOMAKE_OPTIONS'. Currently understood options are: 'gnits' 'gnu' 'foreign' 'cygnus' Set the strictness as appropriate. The 'gnits' option also implies 'readme-alpha' and 'check-news'. 'ansi2knr' 'path/ansi2knr' Turn on automatic de-ANSI-fication. *Note ANSI::. If preceeded by a path, the generated 'Makefile.in' will look in the specified directory to find the 'ansi2knr' program. Generally the path should be a relative path to another directory in the same distribution (though Automake currently does not check this). 'check-news' Cause 'make dist' to fail unless the current version number appears in the first few lines of the 'NEWS' file. 'dejagnu' Cause 'dejagnu'-specific rules to be generated. *Note Tests::. 'dist-shar' Generate a 'dist-shar' target as well as the ordinary 'dist' target. This new target will create a shar archive of the distribution. 'dist-zip' Generate a 'dist-zip' target as well as the ordinary 'dist' target. This new target will create a zip archive of the distribution. 'dist-tarZ' Generate a 'dist-tarZ' target as well as the ordinary 'dist' target. This new target will create a compressed tar archive of the distribution; a traditional 'tar' and 'compress' will be assumed. Warning: if you are actually using 'GNU tar', then the generated archive might contain nonportable constructs. 'no-dependencies' This is similar to using '--include-deps' on the command line, but is useful for those situations where you don't have the necessary bits to make automatic dependency tracking work *Note Dependencies::. In this case the effect is to effectively disable automatic dependency tracking. 'no-installinfo' The generated 'Makefile.in' will not cause info pages to be built or installed by default. However, 'info' and 'install-info' targets will still be available. This option is disallowed at 'GNU' strictness and above. 'no-installman' The generated 'Makefile.in' will not cause man pages to be installed by default. However, an 'install-man' target will still be available for optional installation. This option is disallowed at 'GNU' strictness and above. 'no-texinfo.tex' Don't require 'texinfo.tex', even if there are texinfo files in this directory. 'readme-alpha' If this release is an alpha release, and the file 'README-alpha' exists, then it will be added to the distribution. If this option is given, version numbers are expected to follow one of two forms. The first form is 'MAJOR.MINOR.ALPHA', where each element is a number; the final period and number should be left off for non-alpha releases. The second form is 'MAJOR.MINORALPHA', where ALPHA is a letter; it should be omitted for non-alpha releases. VERSION A version number (eg '0.30') can be specified. If Automake is not newer than the version specified, creation of the 'Makefile.in' will be suppressed. Unrecognized options are diagnosed by 'automake'. 16 Miscellaneous Rules ********************** There are a few rules and variables that didn't fit anywhere else. 16.1 Interfacing to 'etags' =========================== 'automake' will generate rules to generate 'TAGS' files for use with GNU Emacs under some circumstances. If any C source code or headers are present, then 'tags' and 'TAGS' targets will be generated for the directory. At the topmost directory of a multi-directory package, a 'tags' target file will be generated which, when run, will generate a 'TAGS' file that includes by reference all 'TAGS' files from subdirectories. Also, if the variable 'ETAGS_ARGS' is defined, a 'tags' target will be generated. This variable is intended for use in directories which contain taggable source that 'etags' does not understand. Here is how Automake generates tags for its source, and for nodes in its Texinfo file: ETAGS_ARGS = automake.in --lang=none \ --regex='/^@node[ \t]+\([^,]+\)/\1/' automake.texi If you add filenames to 'ETAGS_ARGS', you will probably also want to set 'TAGS_DEPENDENCIES'. The contents of this variable are added directly to the dependencies for the 'tags' target. Automake will also generate an 'ID' target which will run 'mkid' on the source. This is only supported on a directory-by-directory basis. 16.2 Handling new file extensions ================================= It is sometimes useful to introduce a new implicit rule to handle a file type that Automake does not know about. If this is done, you must notify GNU Make of the new suffixes. This can be done by putting a list of new suffixes in the 'SUFFIXES' variable. For instance, currently automake does not provide any Java support. If you wrote a macro to generate '.class' files from '.java' source files, you would also need to add these suffixes to the list: SUFFIXES = .java .class 17 Conditionals *************** Automake supports a simple type of conditionals. Before using a conditional, you must define it by using 'AM_CONDITIONAL' in the 'configure.in' file. The 'AM_CONDITIONAL' macro takes two arguments. The first argument to 'AM_CONDITIONAL' is the name of the conditional. This should be a simple string starting with a letter and containing only letters, digits, and underscores. The second argument to 'AM_CONDITIONAL' is a shell condition, suitable for use in a shell if statement. The condition is evaluated when 'configure' is run. Conditionals typically depend upon options which the user provides to the 'configure' script. Here is an example of how to write a conditional which is true if the user uses the '--enable-debug' option. AC_ARG_ENABLE(debug, [ --enable-debug Turn on debugging], [case "${enableval}" in yes) debug=true ;; no) debug=false ;; *) AC_MSG_ERROR(bad value ${enableval} for --enable-debug) ;; esac],[debug=false]) AM_CONDITIONAL(DEBUG, test x$debug = xtrue) Here is an example of how to use that conditional in 'Makefile.am': if DEBUG DBG = debug else DBG = endif noinst_PROGRAMS = $(DBG) This trivial example could also be handled using EXTRA_PROGRAMS (*note A Program::). You may only test a single variable in an 'if' statement. The 'else' statement may be omitted. Conditionals may be nested to any depth. Note that conditionals in Automake are not the same as conditionals in GNU Make. Automake conditionals are checked at configure time by the 'configure' script, and affect the translation from 'Makefile.in' to 'Makefile'. They are based on options passed to 'configure' and on results that 'configure' has discovered about the host system. GNU Make conditionals are checked at make time, and are based on variables passed to the make program or defined in the 'Makefile'. Automake conditionals will work with any make program. 18 The effect of '--gnu' and '--gnits' ************************************** The '--gnu' option (or 'gnu' in the 'AUTOMAKE_OPTIONS' variable) causes 'automake' to check the following: * The files 'INSTALL', 'NEWS', 'README', 'COPYING', 'AUTHORS', and 'ChangeLog' are required at the topmost directory of the package. * The options 'no-installman' and 'no-installinfo' are prohibited. Note that this option will be extended in the future to do even more checking; it is advisable to be familiar with the precise requirements of the GNU standards. Also, '--gnu' can require certain non-standard GNU programs to exist for use by various maintainer-only targets; for instance in the future 'pathchk' might be required for 'make dist'. The '--gnits' option does everything that '--gnu' does, and checks the following as well: * 'make dist' will check to make sure the 'NEWS' file has been updated to the current version. * The file 'COPYING.LIB' is prohibited. The LGPL is apparently considered a failed experiment. * 'VERSION' is checked to make sure its format complies with Gnits standards. * If 'VERSION' indicates that this is an alpha release, and the file 'README-alpha' appears in the topmost directory of a package, then it is included in the distribution. This is done in '--gnits' mode, and no other, because this mode is the only one where version number formats are constrained, and hence the only mode where 'automake' can automatically determine whether 'README-alpha' should be included. * The file 'THANKS' is required. 19 The effect of '--cygnus' *************************** Cygnus Solutions has slightly different rules for how a 'Makefile.in' is to be constructed. Passing '--cygnus' to 'automake' will cause any generated 'Makefile.in' to comply with Cygnus rules. Here are the precise effects of '--cygnus': * Info files are always created in the build directory, and not in the source directory. * 'texinfo.tex' is not required if a Texinfo source file is specified. The assumption is that the file will be supplied, but in a place that 'automake' cannot find. This assumption is an artifact of how Cygnus packages are typically bundled. * 'make dist' will look for files in the build directory as well as the source directory. This is required to support putting info files into the build directory. * Certain tools will be searched for in the build tree as well as in the user's 'PATH'. These tools are 'runtest', 'expect', 'makeinfo' and 'texi2dvi'. * '--foreign' is implied. * The options 'no-installinfo' and 'no-dependencies' are implied. * The macros 'AM_MAINTAINER_MODE' and 'AM_CYGWIN32' are required. * The 'check' target doesn't depend on 'all'. GNU maintainers are advised to use 'gnu' strictness in preference to the special Cygnus mode. 20 When Automake Isn't Enough ***************************** Automake's implicit copying semantics means that many problems can be worked around by simply adding some 'make' targets and rules to 'Makefile.in'. 'automake' will ignore these additions. There are some caveats to doing this. Although you can overload a target already used by 'automake', it is often inadvisable, particularly in the topmost directory of a non-flat package. However, various useful targets have a '-local' version you can specify in your 'Makefile.in'. Automake will supplement the standard target with these user-supplied targets. The targets that support a local version are 'all', 'info', 'dvi', 'check', 'install-data', 'install-exec', 'uninstall', and the various 'clean' targets ('mostlyclean', 'clean', 'distclean', and 'maintainer-clean'). Note that there are no 'uninstall-exec-local' or 'uninstall-data-local' targets; just use 'uninstall-local'. It doesn't make sense to uninstall just data or just executables. For instance, here is one way to install a file in '/etc': install-data-local: $(INSTALL_DATA) $(srcdir)/afile /etc/afile Some targets also have a way to run another target, called a "hook", after their work is done. The hook is named after the principal target, with '-hook' appended. The targets allowing hooks are 'install-data', 'install-exec', 'dist', and 'distcheck'. For instance, here is how to create a hard link to an installed program: install-exec-hook: ln $(bindir)/program $(bindir)/proglink 21 Distributing 'Makefile.in's ****************************** Automake places no restrictions on the distribution of the resulting 'Makefile.in's. We still encourage software authors to distribute their work under terms like those of the GPL, but doing so is not required to use Automake. Some of the files that can be automatically installed via the '--add-missing' switch do fall under the GPL; examine each file to see. 22 Some ideas for the future **************************** Here are some things that might happen in the future: * HTML support. * The output will be cleaned up. For instance, only variables which are actually used will appear in the generated 'Makefile.in'. * There will be support for automatically recoding a distribution. The intent is to allow a maintainer to use whatever character set is most convenient locally, but for all distributions to be Unicode or ISO 10646 with the UTF-8 encoding. * Support for automatically generating packages (eg Debian packages, RPM packages, Solaris packages, etc). This will happen more quickly if someone with package-building experience can tell me what would be helpful. * Rewrite in Guile. This won't happen in the near future, but it will eventually happen. Index ***** * Menu: * _LDADD: A Program. (line 991) * _LDFLAGS: A Program. (line 1013) * _LIBADD: A Library. (line 1051) * _SOURCES: A Program. (line 951) * _TEXINFOS: Texinfo. (line 1524) * AC_ARG_PROGRAM: Requirements. (line 563) * AC_CANONICAL_HOST: Optional. (line 620) * AC_CANONICAL_SYSTEM: Optional. (line 624) * AC_CHECK_PROG: Optional. (line 696) * AC_CHECK_PROGS: Optional. (line 696) * AC_CHECK_TOOL: Optional. (line 620) * AC_CHECK_TOOL <1>: Optional. (line 696) * AC_CONFIG_AUX_DIR: Optional. (line 608) * AC_CONFIG_HEADER: Optional. (line 601) * AC_DECL_YYTEXT: Optional. (line 663) * AC_FUNC_ALLOCA: Optional. (line 640) * AC_FUNC_FNMATCH: Optional. (line 640) * AC_FUNC_FNMATCH <1>: Optional. (line 640) * AC_FUNC_GETLOADAVG: Optional. (line 640) * AC_FUNC_MEMCMP: Optional. (line 640) * AC_OUTPUT: Requirements. (line 589) * AC_PATH_PROG: Optional. (line 696) * AC_PATH_PROGS: Optional. (line 696) * AC_PATH_XTRA: Optional. (line 614) * AC_PROG_CXX: Optional. (line 651) * AC_PROG_INSTALL: Requirements. (line 569) * AC_PROG_LEX: Optional. (line 666) * AC_PROG_MAKE_SET: Requirements. (line 564) * AC_PROG_RANLIB: Optional. (line 648) * AC_PROG_YACC: Optional. (line 660) * AC_REPLACE_FUNCS: Optional. (line 640) * AC_REPLACE_GNU_GETOPT: Optional. (line 640) * AC_STRUCT_ST_BLOCKS: Optional. (line 640) * AC_SUBST: Optional. (line 696) * all: Extending. (line 1993) * ALL_LINGUAS: Optional. (line 671) * AM_CONDITIONAL: Conditionals. (line 1849) * AM_CONFIG_HEADER: Macros. (line 754) * AM_C_PROTOTYPES: Optional. (line 675) * AM_C_PROTOTYPES <1>: Macros. (line 788) * AM_C_PROTOTYPES <2>: ANSI. (line 1282) * AM_FUNC_ERROR_AT_LINE: Macros. (line 773) * AM_FUNC_MKTIME: Macros. (line 777) * AM_FUNC_OBSTACK: Macros. (line 781) * AM_FUNC_STRTOD: Optional. (line 640) * AM_FUNC_STRTOD <1>: Macros. (line 769) * AM_GNU_GETTEXT: Optional. (line 681) * AM_HEADER_TIOCGWINSZ_NEEDS_SYS_IOCTL: Macros. (line 793) * AM_INIT_AUTOMAKE: Requirements. (line 549) * AM_MAINTAINER_MODE: Optional. (line 687) * AM_PATH_LISPDIR: Macros. (line 804) * AM_PROG_CC_STDC: Macros. (line 816) * AM_PROG_INSTALL: Requirements. (line 569) * AM_PROG_INSTALL <1>: Macros. (line 819) * AM_PROG_LEX: Macros. (line 824) * AM_PROG_LIBTOOL: Optional. (line 655) * AM_SANITY_CHECK: Macros. (line 830) * AM_SYS_POSIX_TERMIOS: Macros. (line 836) * AM_TYPE_PTRDIFF_T: Macros. (line 840) * AM_WITH_DMALLOC: Macros. (line 846) * AM_WITH_REGEX: Optional. (line 640) * AM_WITH_REGEX <1>: Macros. (line 853) * ansi2knr: ANSI. (line 1267) * AUTOMAKE_OPTIONS: ANSI. (line 1266) * AUTOMAKE_OPTIONS <1>: Dependencies. (line 1333) * AUTOMAKE_OPTIONS <2>: Options. (line 1716) * build_alias: Optional. (line 624) * BUILT_SOURCES: Sources. (line 1409) * check: Extending. (line 1993) * CLEANFILES: Clean. (line 1623) * CXX: C++. (line 1243) * CXXCOMPILE: C++. (line 1250) * CXXFLAGS: C++. (line 1246) * CXXLINK: C++. (line 1253) * DATA: Uniform. (line 238) * DATA <1>: Data. (line 1393) * dejagnu: Tests. (line 1707) * DEJATOOL: Tests. (line 1707) * DESTDIR: Install. (line 1613) * dist: Dependencies. (line 1311) * dist <1>: Dist. (line 1631) * dist-hook: Extending. (line 2003) * dist-shar: Options. (line 1743) * dist-tarZ: Options. (line 1754) * dist-zip: Options. (line 1747) * distcheck: Dist. (line 1668) * DISTCLEANFILES: Clean. (line 1623) * DIST_SUBDIRS: Dist. (line 1654) * dvi: Extending. (line 1993) * ELCFILES: Emacs Lisp. (line 1436) * ETAGS_ARGS: Tags. (line 1815) * EXPECT: Tests. (line 1707) * EXTRA_DIST: Dist. (line 1646) * EXTRA_PROGRAMS: A Program. (line 980) * HEADERS: Uniform. (line 238) * HEADERS <1>: Headers. (line 1378) * host_alias: Optional. (line 620) * host_triplet: Optional. (line 620) * id: Tags. (line 1828) * info: Options. (line 1767) * info <1>: Extending. (line 1993) * info_TEXINFOS: Texinfo. (line 1511) * install: Install. (line 1591) * install-data: Install. (line 1591) * install-data <1>: Extending. (line 1993) * install-data-hook: Extending. (line 2003) * install-data-local: Install. (line 1598) * install-exec: Install. (line 1591) * install-exec <1>: Extending. (line 1993) * install-exec-hook: Extending. (line 2003) * install-exec-local: Install. (line 1598) * install-info: Options. (line 1767) * install-man: Man pages. (line 1563) * install-man <1>: Options. (line 1773) * install-strip: Install. (line 1594) * installdirs: Install. (line 1594) * LDADD: A Program. (line 984) * LDFLAGS: Program variables. (line 1114) * LIBADD: A Library. (line 1051) * LIBOBJS: Optional. (line 645) * LIBRARIES: Uniform. (line 238) * LISP: Uniform. (line 238) * LISP <1>: Emacs Lisp. (line 1432) * lisp_LISP: Emacs Lisp. (line 1432) * MAINTAINERCLEANFILES: Clean. (line 1623) * MANS: Uniform. (line 238) * MANS <1>: Man pages. (line 1556) * man_MANS: Man pages. (line 1556) * MOSTLYCLEANFILES: Clean. (line 1623) * no-dependencies: Dependencies. (line 1333) * no-installman: Man pages. (line 1563) * noinst_LISP: Emacs Lisp. (line 1432) * OMIT_DEPENDENCIES: Dependencies. (line 1321) * PACKAGE: Uniform. (line 190) * PACKAGE <1>: Requirements. (line 551) * PACKAGE <2>: Dist. (line 1631) * PROGRAMS: Uniform. (line 180) * PROGRAMS <1>: Uniform. (line 238) * RUNTEST: Tests. (line 1707) * RUNTESTDEFAULTFLAGS: Tests. (line 1702) * RUNTESTFLAGS: Tests. (line 1707) * SCRIPTS: Uniform. (line 238) * SCRIPTS <1>: Scripts. (line 1357) * SOURCES: A Program. (line 951) * SUBDIRS: Depth. (line 121) * SUBDIRS <1>: Top level. (line 879) * SUFFIXES: Suffixes. (line 1836) * tags: Tags. (line 1807) * TAGS_DEPENDENCIES: Tags. (line 1825) * target_alias: Optional. (line 624) * TESTS: Tests. (line 1693) * TESTS_ENVIRONMENT: Tests. (line 1693) * TEXINFOS: Uniform. (line 238) * TEXINFOS <1>: Texinfo. (line 1511) * TEXINFOS <2>: Texinfo. (line 1524) * uninstall: Install. (line 1594) * uninstall <1>: Extending. (line 1993) * VERSION: Requirements. (line 551) * VERSION <1>: Dist. (line 1631) * YACC: Optional. (line 660) GNU Automake 1 Introduction 2 General ideas 2.1 General Operation 2.2 Depth 2.3 Strictness 2.4 The Uniform Naming Scheme 2.5 How derived variables are named 3 Some example packages 3.1 A simple example, start to finish 3.2 A classic program 3.3 Building etags and ctags 4 Creating a 'Makefile.in' 5 Scanning 'configure.in' 5.1 Configuration requirements 5.2 Other things Automake recognizes 5.3 Auto-generating aclocal.m4 5.4 Autoconf macros supplied with Automake 5.5 Writing your own aclocal macros 6 The top-level 'Makefile.am' 7 Building Programs and Libraries 7.1 Building a program 7.2 Building a library 7.3 Special handling for LIBOBJS and ALLOCA 7.4 Building a Shared Library 7.5 Variables used when building a program 7.6 Yacc and Lex support 7.7 C++ and other languages 7.8 Automatic de-ANSI-fication 7.9 Automatic dependency tracking 8 Other Derived Objects 8.1 Executable Scripts 8.2 Header files 8.3 Architecture-independent data files 8.4 Built sources 9 Other GNU Tools 9.1 Emacs Lisp 9.2 Gettext 9.3 Guile 9.4 Libtool 9.5 Java 10 Building documentation 10.1 Texinfo 10.2 Man pages 11 What Gets Installed 12 What Gets Cleaned 13 What Goes in a Distribution 14 Support for test suites 15 Changing Automake's Behavior 16 Miscellaneous Rules 16.1 Interfacing to 'etags' 16.2 Handling new file extensions 17 Conditionals 18 The effect of '--gnu' and '--gnits' 19 The effect of '--cygnus' 20 When Automake Isn't Enough 21 Distributing 'Makefile.in's 22 Some ideas for the future Index