This file documents Message, the Emacs message composition mode.
Copyright © 1996–2016 Free Software Foundation, Inc.
Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.3 or any later version published by the Free Software Foundation; with no Invariant Sections, with the Front-Cover Texts being “A GNU Manual”, and with the Back-Cover Texts as in (a) below. A copy of the license is included in the section entitled “GNU Free Documentation License”.
(a) The FSF’s Back-Cover Text is: “You have the freedom to copy and modify this GNU manual.”
All message composition from Gnus (both mail and news) takes place in Message mode buffers.
|Interface||Setting up message buffers.|
|Commands||Commands you can execute in message mode buffers.|
|Variables||Customizing the message buffers.|
|Compatibility||Making Message backwards compatible.|
|Appendices||More technical things.|
|GNU Free Documentation License||The license for this documentation.|
|Index||Variable, function and concept index.|
|Key Index||List of Message mode keys.|
Message is distributed with Gnus. The Gnus distribution corresponding to this manual is Gnus v5.13
When a program (or a person) wants to respond to a message—reply,
follow up, forward, cancel—the program (or person) should just put
point in the buffer where the message is and call the required command.
Message will then pop up a new
message mode buffer with
appropriate headers filled out, and the user can edit the message before
|• New Mail Message:||Editing a brand new mail message.|
|• New News Message:||Editing a brand new news message.|
|• Reply:||Replying via mail.|
|• Wide Reply:||Responding to all people via mail.|
|• Followup:||Following up via news.|
|• Canceling News:||Canceling a news article.|
|• Superseding:||Superseding a message.|
|• Forwarding:||Forwarding a message via news or mail.|
|• Resending:||Resending a mail message.|
|• Bouncing:||Bouncing a mail message.|
|• Mailing Lists:||Send mail to mailing lists.|
You can customize the Message Mode tool bar, see M-x customize-apropos RET message-tool-bar. This feature is only available in Emacs.
1.1 New Mail Message
message-mail command pops up a new message buffer.
Two optional parameters are accepted: The first will be used as the
To header and the second as the
Subject header. If these
nil, those two headers will be empty.
1.2 New News Message
message-news command pops up a new message buffer.
This function accepts two optional parameters. The first will be used
Newsgroups header and the second as the
header. If these are
nil, those two headers will be empty.
message-reply function pops up a message buffer that’s a
reply to the message in the current buffer.
Message uses the normal methods to determine where replies are to go
(see Responses), but you can change the behavior to suit your needs
by fiddling with the
If you want the replies to go to the
Sender instead of the
From, you could do something like this:
(setq message-reply-to-function (lambda () (cond ((equal (mail-fetch-field "from") "somebody") (list (cons 'To (mail-fetch-field "sender")))) (t nil))))
This function will be called narrowed to the head of the article that is being replied to.
As you can see, this function should return a list. In this case, it
((To . "Whom")) if it has an opinion as to what the To
header should be. If it does not, it should just return
the normal methods for determining the To header will be used.
Each list element should be a cons, where the CAR should be the
name of a header (e.g.,
Cc) and the CDR should be the header
value (e.g., ‘firstname.lastname@example.org’). All these headers will be
inserted into the head of the outgoing mail.
1.4 Wide Reply
message-wide-reply pops up a message buffer that’s a wide
reply to the message in the current buffer. A wide reply is a
reply that goes out to all people listed in the
Message uses the normal methods to determine where wide replies are to go,
but you can change the behavior to suit your needs by fiddling with the
message-wide-reply-to-function. It is used in the same way as
message-reply-to-function (see Reply).
Addresses that match the
expression (or list of regular expressions) will be removed from the
Cc header. A value of
nil means exclude your name only.
message-prune-recipient-rules is used to prune the addresses
used when doing a wide reply. It’s meant to be used to remove
duplicate addresses and the like. It’s a list of lists, where the
first element is a regexp to match the address to trigger the rule,
and the second is a regexp that will be expanded based on the first,
to match addresses to be pruned.
It’s complicated to explain, but it’s easy to use.
For instance, if you get an email from ‘email@example.com’, but
‘firstname.lastname@example.org’ is also in the
Cc list, then your
wide reply will go out to both these addresses, since they are unique.
To avoid this, do something like the following:
(setq message-prune-recipient-rules '(("^\\([^@]+\\)@\\(.*\\)" "\\1@.*[.]\\2")))
If, for instance, you want all wide replies that involve messages from ‘email@example.com’ to go to that address, and nowhere else (i.e., remove all other recipients if ‘firstname.lastname@example.org’ is in the recipient list:
(setq message-prune-recipient-rules '(("email@example.com" ".")))
message-wide-reply-confirm-recipients is non-
will be asked to confirm that you want to reply to multiple
recipients. The default is
message-followup command pops up a message buffer that’s a
followup to the message in the current buffer.
Message uses the normal methods to determine where followups are to go,
but you can change the behavior to suit your needs by fiddling with the
message-followup-to-function. It is used in the same way as
message-reply-to-function (see Reply).
message-use-followup-to variable says what to do about
Followup-To headers. If it is
use, always use the value.
If it is
ask (which is the default), ask whether to use the
value. If it is
t, use the value unless it is ‘poster’. If
nil, don’t use the value.
1.6 Canceling News
message-cancel-news command cancels the article in the
The value of
message-cancel-message is inserted in the body of
the cancel message. The default is ‘I am canceling my own
When Message posts news messages, it inserts
headers by default. This is a cryptographic header that ensures that
only you can cancel your own messages, which is nice. The downside
is that if you lose your .emacs file (which is where Gnus
stores the secret cancel lock password (which is generated
automatically the first time you use this feature)), you won’t be
able to cancel your message. If you want to manage a password yourself,
you can put something like the following in your ~/.gnus.el file:
(setq canlock-password "geheimnis" canlock-password-for-verify canlock-password)
Whether to insert the header or not is controlled by the
Not many news servers respect the
Cancel-Lock header yet, but
this is expected to change in the future.
message-supersede command pops up a message buffer that will
supersede the message in the current buffer.
Headers matching the
removed before popping up the new message buffer. The default is
message-forward command pops up a message buffer to forward
the message in the current buffer. If given a prefix, forward using
nil, all headers that match this regexp will be deleted when forwarding a message.
nil, only headers that match this regexp will be kept when forwarding a message.
A list of functions that are called to generate a subject header for forwarded messages. The subject generated by the previous function is passed into each successive function.
The provided functions are:
If this variable is
t, the subjects of forwarded messages have the evidence of previous forwards (such as ‘Fwd:’, ‘Re:’, ‘(fwd)’) removed before the new subject is constructed. The default value is
If this variable is
t(the default), forwarded messages are included as inline MIME RFC822 parts. If it’s
nil, forwarded messages will just be copied inline to the new message, like previous, non MIME-savvy versions of Gnus would do.
nil, put forwarded message before signature, else after.
message-resend command will prompt the user for an address
and resend the message in the current buffer to that address.
Headers that match the
message-ignored-resent-headers regexp will
be removed before sending the message.
message-bounce command will, if the current buffer contains a
bounced mail message, pop up a message buffer stripped of the bounce
information. A bounced message is typically a mail you’ve sent
out that has been returned by some
Headers that match the
will be removed before popping up the buffer. The default is
1.11 Mailing Lists
Sometimes while posting to mailing lists, the poster needs to direct followups to the post to specific places. The Mail-Followup-To (MFT) was created to enable just this. Three example scenarios where this is useful:
- A mailing list poster can use MFT to express that responses should be sent to just the list, and not the poster as well. This will happen if the poster is already subscribed to the list.
- A mailing list poster can use MFT to express that responses should be sent to the list and the poster as well. This will happen if the poster is not subscribed to the list.
- If a message is posted to several mailing lists, MFT may also be used to direct the following discussion to one list only, because discussions that are spread over several lists tend to be fragmented and very difficult to follow.
Gnus honors the MFT header in other’s messages (i.e., while following up to someone else’s post) and also provides support for generating sensible MFT headers for outgoing messages as well.
1.11.1 Composing a correct MFT header automagically
The first step in getting Gnus to automagically generate a MFT header in posts you make is to give Gnus a list of the mailing lists addresses you are subscribed to. You can do this in more than one way. The following variables would come in handy.
This should be a list of addresses the user is subscribed to. Its default value is
(setq message-subscribed-addresses '("firstname.lastname@example.org" "email@example.com"))
This should be a list of regexps denoting the addresses of mailing lists subscribed to. Default value is
nil. Example: If you want to achieve the same result as above:
(setq message-subscribed-regexps '("\\(ding@gnus\\)\\|\\(bing@noose\\)\\.org")
This can be a list of functions to be called (one at a time!!) to determine the value of MFT headers. It is advisable that these functions not take any arguments. Default value is
There is a pre-defined function in Gnus that is a good candidate for this variable.
gnus-find-subscribed-addressesis a function that returns a list of addresses corresponding to the groups that have the
subscribed(see Group Parameters in The Gnus Manual) group parameter set to a non-
nilvalue. This is how you would do it.
(setq message-subscribed-address-functions '(gnus-find-subscribed-addresses))
You might be one organized human freak and have a list of addresses of all subscribed mailing lists in a separate file! Then you can just set this variable to the name of the file and life would be good.
You can use one or more of the above variables. All their values are “added” in some way that works :-)
Now you are all set. Just start composing a message as you normally do. And just send it; as always. Just before the message is sent out, Gnus’ MFT generation thingy kicks in and checks if the message already has a MFT field. If there is one, it is left alone. (Except if it’s empty; in that case, the field is removed and is not replaced with an automatically generated one. This lets you disable MFT generation on a per-message basis.) If there is none, then the list of recipient addresses (in the To: and Cc: headers) is checked to see if one of them is a list address you are subscribed to. If none of them is a list address, then no MFT is generated; otherwise, a MFT is added to the other headers and set to the value of all addresses in To: and Cc:
Hm. “So”, you ask, “what if I send an email to a list I am not
subscribed to? I want my MFT to say that I want an extra copy.” (This
is supposed to be interpreted by others the same way as if there were no
MFT, but you can use an explicit MFT to override someone else’s
to-address group parameter.) The function
message-generate-unsubscribed-mail-followup-to might come in
handy. It is bound to C-c C-f C-a by default. In any case, you
can insert a MFT of your own choice; C-c C-f C-m
message-goto-mail-followup-to) will help you get started.
1.11.2 Honoring an MFT post
When you followup to a post on a mailing list, and the post has a MFT
header, Gnus’ action will depend on the value of the variable
message-use-mail-followup-to. This variable can be one of:
Always honor MFTs. The To: and Cc: headers in your followup will be derived from the MFT header of the original post. This is the default.
Always dishonor MFTs (just ignore the darned thing)
Gnus will prompt you for an action.
It is considered good netiquette to honor MFT, as it is assumed the fellow who posted a message knows where the followups need to go better than you do.
|• Buffer Entry:||Commands after entering a Message buffer.|
|• Header Commands:||Commands for moving headers or changing headers.|
|• Movement:||Moving around in message buffers.|
|• Insertion:||Inserting things into message buffers.|
|• MIME:||MIME considerations.|
|• IDNA:||Non-ASCII domain name considerations.|
|• Security:||Signing and encrypting messages.|
|• Various Commands:||Various things.|
|• Sending:||Actually sending the message.|
|• Mail Aliases:||How to use mail aliases.|
|• Spelling:||Having Emacs check your spelling.|
2.1 Buffer Entry
You most often end up in a Message buffer when responding to some other message of some sort. Message does lots of handling of quoted text, and may remove signatures, reformat the text, or the like—depending on which used settings you’re using. Message usually gets things right, but sometimes it stumbles. To help the user unwind these stumblings, Message sets the undo boundary before each major automatic action it takes. If you press the undo key (usually located at C-_) a few times, you will get back the un-edited message you’re responding to.
2.2 Header Commands
2.2.1 Commands for moving to headers
These following commands move to the header in question. If it doesn’t exist, it will be inserted.
- C-c ?
Describe the message mode.
- C-c C-f C-t
Go to the
- C-c C-f C-o
Go to the
message-goto-from). (The “o” in the key binding is for Originator.)
- C-c C-f C-b
Go to the
- C-c C-f C-w
Go to the
- C-c C-f C-c
Go to the
- C-c C-f C-s
Go to the
- C-c C-f C-r
Go to the
- C-c C-f C-n
Go to the
- C-c C-f C-d
Go to the
- C-c C-f C-f
Go to the
- C-c C-f C-k
Go to the
- C-c C-f C-u
Go to the
- C-c C-f C-i
This inserts the ‘Importance:’ header with a value of ‘high’. This header is used to signal the importance of the message to the receiver. If the header is already present in the buffer, it cycles between the three valid values according to RFC 1376: ‘low’, ‘normal’ and ‘high’.
- C-c C-f C-a
Insert a reasonable ‘Mail-Followup-To:’ header (see Mailing Lists) in a post to an unsubscribed list. When making original posts to a mailing list you are not subscribed to, you have to type in a ‘Mail-Followup-To:’ header by hand. The contents, usually, are the addresses of the list and your own address. This function inserts such a header automatically. It fetches the contents of the ‘To:’ header in the current mail buffer, and appends the current
If the optional argument
nil, the addresses in the ‘Cc:’ header are also put into the ‘Mail-Followup-To:’ header.
2.2.2 Commands to change headers
- C-c C-o
Sort headers according to
- C-c C-t
Toheader that contains the
Fromheader of the message you’re following up (
- C-c C-n
Newsgroupsheader that reflects the
Newsgroupsheader of the article you’re replying to (
- C-c C-l
Send a message to the list only. Remove all addresses but the list address from
- C-c M-n
Insert a request for a disposition notification. (
message-insert-disposition-notification-to). This means that if the recipient supports RFC 2298 she might send you a notification that she received the message.
- M-x message-insert-importance-high
Insert an ‘Importance’ header with a value of ‘high’, deleting headers if necessary.
- M-x message-insert-importance-low
Insert an ‘Importance’ header with a value of ‘low’, deleting headers if necessary.
- C-c C-f s
Change the current ‘Subject’ header. Ask for new ‘Subject’ header and append ‘(was: <Old Subject>)’. The old subject can be stripped on replying, see
message-subject-trailing-was-query(see Message Headers).
- C-c C-f x
Set up the ‘FollowUp-To’ header with a target newsgroup for a cross-post, add that target newsgroup to the ‘Newsgroups’ header if it is not a member of ‘Newsgroups’, and insert a note in the body. If
nilor if this command is called with a prefix-argument, only the ‘FollowUp-To’ header will be set but the target newsgroup will not be added to the ‘Newsgroups’ header. The function to insert a note is controlled by the
- C-c C-f t
Replace contents of ‘To’ header with contents of ‘Cc’ header (or the ‘Bcc’ header, if there is no ‘Cc’ header).
- C-c C-f w
Insert ‘To’ and ‘Cc’ headers as if you were doing a wide reply even if the message was not made for a wide reply first.
- C-c C-f a
Insert ‘X-No-Archive: Yes’ in the header and a note in the body. The header and the note can be customized using
message-archive-note. When called with a prefix argument, ask for a text to insert. If you don’t want the note in the body, set
- C-c C-b
Move to the beginning of the body of the message (
- C-c C-i
Move to the signature of the message (
If at beginning of header value, go to beginning of line, else go to beginning of header value. (The header value comes after the header name and the colon.) This behavior can be disabled by toggling the variable
- C-c C-y
Yank the message that’s being replied to into the message buffer (
- C-c C-M-y
Prompt for a buffer name and yank the contents of that buffer into the message buffer (
- C-c C-q
Fill the yanked message (
message-fill-yanked-message). Warning: Can severely mess up the yanked text if its quoting conventions are strange. You’ll quickly get a feel for when it’s safe, though. Anyway, just remember that C-x u (
undo) is available and you’ll be all right.
- C-c C-w
Insert a signature at the end of the buffer (
- C-c M-h
Insert the message headers (
- C-c M-m
Mark some region in the current article with enclosing tags. See
message-mark-insert-end. When called with a prefix argument, use slrn style verbatim marks (‘#v+’ and ‘#v-’).
- C-c M-f
Insert a file in the current article with enclosing tags. See
message-mark-insert-end. When called with a prefix argument, use slrn style verbatim marks (‘#v+’ and ‘#v-’).
Message is a MIME-compliant posting agent. The user generally
doesn’t have to do anything to make the MIME happen—Message will
automatically add the
The most typical thing users want to use the multipart things in MIME for is to add “attachments” to mail they send out. This can be done with the C-c C-a command (M-x mml-attach-file), which will prompt for a file name and a MIME type.
If your Emacs supports drag and drop, you can also drop the file in the
Message buffer. The variable
what kind of action is done when you drop a file into the Message
buffer. The variable
mml-dnd-attach-options controls which
MIME options you want to specify when dropping a file. If it
is a list, valid members are
type. If it is
nil, don’t ask for options. If it is
t, ask the user
whether or not to specify options.
You can also create arbitrarily complex multiparts using the MML language (see Composing in The Emacs MIME Manual).
IDNA is a standard way to encode non-ASCII domain names into a readable ASCII string. The details can be found in RFC 3490.
Message is a IDNA-compliant posting agent. The user
generally doesn’t have to do anything to make the IDNA
happen—Message will encode non-ASCII domain names in
Cc headers automatically.
Until IDNA becomes more well known, Message queries you whether IDNA encoding of the domain name really should occur. Some users might not be aware that domain names can contain non-ASCII now, so this gives them a safety net if they accidentally typed a non-ASCII domain name.
message-use-idna variable control whether IDNA is
used. If the variable is
nil no IDNA encoding will
ever happen, if it is set to the symbol
ask the user will be
queried, and if set to
t (which is the default if IDNA
is fully available) IDNA encoding happens automatically.
If you want to experiment with the IDNA encoding, you can invoke M-x message-idna-to-ascii-rhs RET in the message buffer to have the non-ASCII domain names encoded while you edit the message.
Note that you must have GNU Libidn installed in order to use this functionality.
By default, e-mails are transmitted without any protection around the Internet, which implies that they can be read and changed by lots of different parties. In particular, they are analyzed under bulk surveillance, which violates basic human rights. To defend those rights, digital self-defense is necessary (in addition to legal changes), and encryption and digital signatures are powerful techniques for self-defense. In essence, encryption ensures that only the intended recipient will be able to read a message, while digital signatures make sure that modifications to messages can be detected by the recipient.
Nowadays, there are two major incompatible e-mail encryption standards, namely OpenPGP and S/MIME. Both of these standards are implemented by the GNU Privacy Guard (GnuPG), which needs to be installed as external software in addition to GNU Emacs. Before you can start to encrypt, decrypt, and sign messages, you need to create a so-called key-pair, which consists of a private key and a public key. Your public key (also known as certificate, in particular with S/MIME), is used by others (a) to encrypt messages intended for you and (b) to verify digital signatures created by you. In contrast, you use your private key (a) to decrypt messages and (b) to sign messages. (You may want to think of your public key as an open safe that you offer to others such that they can deposit messages and lock the door, while your private key corresponds to the opening combination for the safe.)
Thus, you need to perform the following steps for e-mail encryption, typically outside Emacs. See, for example, the The GNU Privacy Handbook for details covering the standard OpenPGP with GnuPG.
- Install GnuPG.
- Create a key-pair for your own e-mail address.
- Distribute your public key, e.g., via upload to key servers.
- Import the public keys for the recipients to which you want to send encrypted e-mails.
Whether to use the standard OpenPGP or S/MIME is beyond the scope of this documentation. Actually, you can use one standard for one set of recipients and the other standard for different recipients (depending their preferences or capabilities).
In case you are not familiar with all those acronyms: The standard
OpenPGP is also called PGP (Pretty Good Privacy).
The command line tools offered by GnuPG for
OpenPGP are called
the one for S/MIME is called
alternative, but discouraged, tool for S/MIME is
openssl. To make matters worse, e-mail messages can be
formed in two different ways with OpenPGP, namely
PGP (RFC 1991/4880) and PGP/MIME (RFC 2015/3156).
The good news, however, is the following: In GNU Emacs, Message supports all those variants, comes with reasonable defaults that can be customized according to your needs, and invokes the proper command line tools behind the scenes for encryption, decryption, as well as creation and verification of digital signatures.
Message uses the MML language for the creation of signed and/or encrypted messages as explained in the following.
|• Signing and encryption:||Signing and encrypting commands.|
|• Using S/MIME:||Using S/MIME|
|• Using OpenPGP:||Using OpenPGP|
|• Passphrase caching:||How to cache passphrases|
|• PGP Compatibility:||Compatibility with older implementations|
|• Encrypt-to-self:||Reading your own encrypted messages|
|• Bcc Warning:||Do not use encryption with Bcc headers|
2.7.1 Signing and encrypting commands
Instructing MML to perform security operations on a MIME part is done using the C-c C-m s key map for signing and the C-c C-m c key map for encryption, as follows.
- C-c C-m s s
Digitally sign current message using S/MIME.
- C-c C-m s o
Digitally sign current message using PGP.
- C-c C-m s p
Digitally sign current message using PGP/MIME.
- C-c C-m c s
Digitally encrypt current message using S/MIME.
- C-c C-m c o
Digitally encrypt current message using PGP.
- C-c C-m c p
Digitally encrypt current message using PGP/MIME.
- C-c C-m C-n
Remove security related MML tags from message.
These commands do not immediately sign or encrypt the message, they merely insert the proper MML secure tag to instruct the MML engine to perform that operation when the message is actually sent. They may perform other operations too, such as locating and retrieving a S/MIME certificate of the person you wish to send encrypted mail to. When the mml parsing engine converts your MML into a properly encoded MIME message, the secure tag will be replaced with either a part or a multipart tag. If your message contains other mml parts, a multipart tag will be used; if no other parts are present in your message a single part tag will be used. This way, message mode will do the Right Thing (TM) with signed/encrypted multipart messages.
Since signing and especially encryption often is used when sensitive
information is sent, you may want to have some way to ensure that your
mail is actually signed or encrypted. After invoking the above
sign/encrypt commands, it is possible to preview the raw article by
using C-u C-c RET P (
mml-preview). Then you can
verify that your long rant about what your ex-significant other or
whomever actually did with that funny looking person at that strange
party the other night, actually will be sent encrypted.
Note! Neither PGP/MIME nor S/MIME encrypt/signs RFC822 headers. They only operate on the MIME object. Keep this in mind before sending mail with a sensitive Subject line.
By default, when encrypting a message, Gnus will use the
“signencrypt” mode, which means the message is both signed and
encrypted. If you would like to disable this for a particular
message, give the
mml-secure-message-encrypt-* command a prefix
argument, e.g., C-u C-c C-m c p.
Actually using the security commands above is not very difficult. At least not compared with making sure all involved programs talk with each other properly. Thus, we now describe what external libraries or programs are required to make things work, and some small general hints.
2.7.2 Using S/MIME
S/MIME requires an external implementation, such as
GNU Privacy Guard or
OpenSSL. The default Emacs interface
to the S/MIME implementation is EasyPG (see EasyPG Assistant
User’s Manual in EasyPG Assistant User’s Manual), which has been
included in Emacs since version 23 and which relies on the command
gpgsm provided by GnuPG. That tool
implements certificate management, including certificate revocation
and expiry, while such tasks need to be performed manually, if OpenSSL
The choice between EasyPG and OpenSSL is controlled by the variable
mml-smime-use, which needs to be set to the value
for EasyPG. Depending on your version of Emacs that value may be the
default; if not, you can either customize that variable or place the
following line in your .emacs file (that line needs to be
placed above other code related to message/gnus/encryption):
Moreover, you may want to customize the variables
mml-default-sign-method to the string
That’s all if you want to use S/MIME with EasyPG, and that’s the recommended way of using S/MIME with Message.
If you think about using OpenSSL instead of EasyPG, please read the
BUGS section in the manual for the
smime command coming with
OpenSSL first. If you still want to use OpenSSL, the following
Note! The remainder of this section assumes you have a basic familiarity with modern cryptography, S/MIME, various PKCS standards, OpenSSL and so on.
The S/MIME support in Message (and MML) can use OpenSSL. OpenSSL performs the actual S/MIME sign/encrypt operations. OpenSSL can be found at http://www.openssl.org/. OpenSSL 0.9.6 and later should work. Version 0.9.5a cannot extract mail addresses from certificates, and it insert a spurious CR character into MIME separators so you may wish to avoid it if you would like to avoid being regarded as someone who send strange mail. (Although by sending S/MIME messages you’ve probably already lost that contest.)
To be able to send encrypted mail, a personal certificate is not
required. Message (MML) need a certificate for the person to whom you
wish to communicate with though. You’re asked for this when you type
C-c C-m c s. Currently there are two ways to retrieve this
certificate, from a local file or from DNS. If you chose a local
file, it need to contain a X.509 certificate in PEM format.
If you chose DNS, you’re asked for the domain name where the
certificate is stored, the default is a good guess. To my belief,
Message (MML) is the first mail agent in the world to support
retrieving S/MIME certificates from DNS, so you’re not
likely to find very many certificates out there. At least there
should be one, stored at the domain
is a more popular method of distributing certificates, support for it
is planned. (Meanwhile, you can use
ldapsearch from the
command line to retrieve a certificate into a file and use it.)
As for signing messages, OpenSSL can’t perform signing operations
without some kind of configuration. Especially, you need to tell it
where your private key and your certificate is stored. MML
uses an Emacs interface to OpenSSL, aptly named
smime.el, and it
custom group used for this configuration. So, try
M-x customize-group RET smime RET and look around.
Currently there is no support for talking to a CA (or RA) to create your own certificate. None is planned either. You need to do this manually with OpenSSL or using some other program. I used Netscape and got a free S/MIME certificate from one of the big CA’s on the net. Netscape is able to export your private key and certificate in PKCS #12 format. Use OpenSSL to convert this into a plain X.509 certificate in PEM format as follows.
$ openssl pkcs12 -in ns.p12 -clcerts -nodes > key+cert.pem
The key+cert.pem file should be pointed to from the
smime-keys variable. You should now be able to send signed mail.
Note! Your private key is now stored unencrypted in the file,
so take care in handling it. Storing encrypted keys on the disk are
supported, and Gnus will ask you for a passphrase before invoking
OpenSSL. Read the OpenSSL documentation for how to achieve this. If
you use unencrypted keys (e.g., if they are on a secure storage, or if
you are on a secure single user machine) simply press
the passphrase prompt.
2.7.3 Using OpenPGP
Use of OpenPGP requires an external software, such as GNU Privacy Guard. Pre-OpenPGP implementations such as PGP 2.x and PGP 5.x are also supported. The default Emacs interface to the PGP implementation is EasyPG (see EasyPG Assistant User’s Manual in EasyPG Assistant User’s Manual), but PGG (see PGG in PGG Manual) and Mailcrypt are also supported. See PGP Compatibility.
As stated earlier, messages encrypted with OpenPGP can be formatted
according to two different standards, namely PGP or
PGP/MIME. The variables
mml-default-sign-method determine which variant to prefer,
PGP/MIME by default.
2.7.4 Passphrase caching
Message with EasyPG internally calls GnuPG (the
gpgsm command) to perform
data encryption, and in certain cases (decrypting or signing for
gpgsm requires user’s passphrase.
Currently the recommended way to supply your passphrase is to use the
In particular, the
gpg-agent program supports passphrase
caching so that you do not need to enter your passphrase for every
decryption/sign operation. See Agent Options in Using the
GNU Privacy Guard.
How to use
gpg-agent in Emacs depends on your version of
GnuPG. With GnuPG version 2.1,
gpg-agent is started
automatically if necessary. With older versions you may need to run
the following command from the shell before starting Emacs.
eval `gpg-agent --daemon`
This will invoke
gpg-agent and set the environment variable
GPG_AGENT_INFO to allow
gpg to communicate with it.
It might be good idea to put this command in your .xsession or
.bash_profile. See Invoking GPG-AGENT in Using the
GNU Privacy Guard.
gpg-agent is set up, it will ask you for a
passphrase as needed for
gpg. Under the X Window System,
you will see a new passphrase input dialog appear. The dialog is
provided by PIN Entry (the
pinentry command), reasonably
recent versions of which can also cooperate with Emacs on a text
console. If that does not work, you may need to put a passphrase into
gpg-agent’s cache beforehand. The following command does the trick.
gpg --use-agent --sign < /dev/null > /dev/null
2.7.5 Compatibility with older implementations
Note, if you are using the
gpg.el you must make sure that the
directory specified by
gpg-temp-directory have permissions
Creating your own key is described in detail in the documentation of your PGP implementation, so we refer to it.
If you have imported your old PGP 2.x key into GnuPG, and want to send
signed and encrypted messages to your fellow PGP 2.x users, you’ll
discover that the receiver cannot understand what you send. One
solution is to use PGP 2.x instead (e.g., if you use
pgp). You could also convince your
fellow PGP 2.x users to convert to GnuPG.
As a final workaround, you can make the sign and encryption work in
two steps; separately sign, then encrypt a message. If you would like
to change this behavior you can customize the
mml-signencrypt-style-alist variable. For example:
(setq mml-signencrypt-style-alist '(("smime" separate) ("pgp" separate) ("pgpauto" separate) ("pgpmime" separate)))
This causes to sign and encrypt in two passes, thus generating a message that can be understood by PGP version 2.
(Refer to http://www.gnupg.org/gph/en/pgp2x.html for more information about the problem.)
By default, messages are encrypted to all recipients (
Bcc headers). Thus, you will not be able to decrypt
your own messages. To make sure that messages are also encrypted to
your own key(s), several alternative solutions exist:
- Use the
encrypt-tooption in the file gpg.conf (for OpenPGP) or gpgsm.conf (for S/MIME with EasyPG). See Invoking GPG in Using the GNU Privacy Guard, or See Invoking GPGSM in Using the GNU Privacy Guard.
- Include your own e-mail address (for which you created a key-pair) among the recipients.
- Customize the variable
mml-secure-openpgp-encrypt-to-self(for OpenPGP) or
mml-secure-smime-encrypt-to-self(for S/MIME with EasyPG).
2.7.7 Bcc Warning
Bcc header is meant to hide recipients of messages.
However, when encrypted messages are used, the e-mail addresses of all
Bcc-headers are given away to all recipients without
warning, which is a bug, see
2.8 Various Commands
- C-c C-r
Caesar rotate (aka. rot13) the current message (
message-caesar-buffer-body). If narrowing is in effect, just rotate the visible portion of the buffer. A numerical prefix says how many places to rotate the text. The default is 13.
- C-c C-e
Elide the text between point and mark (
message-elide-region). The text is killed and replaced with the contents of the variable
message-elide-ellipsis. The default value is to use an ellipsis (‘[...]’).
This is a format-spec string, and you can use ‘%l’ to say how many lines were removed, and ‘%c’ to say how many characters were removed.
- C-c M-k
Kill the address under point.
- C-c C-z
Kill all the text up to the signature, or if that’s missing, up to the end of the message (
- C-c C-v
Delete all text in the body of the message that is outside the region (
Insert four newlines, and then reformat if inside quoted text.
Here’s an example:
> This is some quoted text. And here's more quoted text.
If point is before ‘And’ and you press M-RET, you’ll get:
> This is some quoted text. * > And here's more quoted text.
‘*’ says where point will be placed.
- C-c M-r
Rename the buffer (
message-rename-buffer). If given a prefix, prompt for a new buffer name.
nil, execute the function it specifies. Otherwise use the function bound to TAB in
- C-c C-c
Send the message and bury the current buffer (
- C-c C-s
Send the message (
- C-c C-d
Bury the message buffer and exit (
- C-c C-k
Kill the message buffer and exit (
2.10 Mail Aliases
message-mail-alias-type variable controls what type of mail
alias expansion to use. Currently two forms are supported:
ecomplete. If this variable is
nil, no mail alias expansion will be performed.
mailabbrev works by parsing the /etc/mailrc and
~/.mailrc files. These files look like:
alias lmi "Lars Magne Ingebrigtsen <firstname.lastname@example.org>" alias ding "email@example.com (ding mailing list)"
After adding lines like this to your ~/.mailrc file, you should
be able to just write ‘lmi’ in the
Cc (and so
on) headers and press SPC to expand the alias.
No expansion will be performed upon sending of the message—all expansions have to be done explicitly.
If you’re using
ecomplete, all addresses from
Cc headers will automatically be put into the
~/.ecompleterc file. When you enter text in the
ecomplete will check out the values stored
there and “electrically” say what completions are possible. To
choose one of these completions, use the M-n command to move
down to the list. Use M-n and M-p to move down and up the
list, and RET to choose a completion.
There are two popular ways to have Emacs spell-check your messages:
ispell is the older and
probably more popular package. You typically first write the message,
and then run the entire thing through
ispell and fix all the
typos. To have this happen automatically when you send a message, put
something like the following in your .emacs file:
(add-hook 'message-send-hook 'ispell-message)
If you’re in the habit of writing in different languages, this can be
controlled by the
(setq ispell-message-dictionary-alist '(("^Newsgroups:.*\\bde\\." . "deutsch8") (".*" . "default")))
ispell depends on having the external ‘ispell’ command
The other popular method is using
flyspell. This package checks
your spelling while you’re writing, and marks any mis-spelled words in
flyspell, put something like the following in your
(defun my-message-setup-routine () (flyspell-mode 1)) (add-hook 'message-setup-hook 'my-message-setup-routine)
flyspell depends on having the external ‘ispell’ command
|• Message Headers:||General message header stuff.|
|• Mail Headers:||Customizing mail headers.|
|• Mail Variables:||Other mail variables.|
|• News Headers:||Customizing news headers.|
|• News Variables:||Other news variables.|
|• Insertion Variables:||Customizing how things are inserted.|
|• Various Message Variables:||Other message variables.|
|• Sending Variables:||Variables for sending.|
|• Message Buffers:||How Message names its buffers.|
|• Message Actions:||Actions to be performed when exiting.|
3.1 Message Headers
Message is quite aggressive on the message generation front. It has to be—it’s a combined news and mail agent. To be able to send combined messages, it has to generate all headers itself (instead of letting the mail/news system do it) to ensure that mail and news copies of messages look sufficiently similar.
t, generate all required headers before starting to compose the message. This can also be a list of headers to generate:
(setq message-generate-headers-first '(References))
message-required-news-headersspecify which headers are required.
Note that some headers will be removed and re-generated before posting, because of the variable
When running Message from Gnus, the message buffers are associated with a draft group.
message-draft-headerssays which headers should be generated when a draft is written to the draft group.
Fromheaders should look. There are four valid values:
Just the address—‘firstname.lastname@example.org’.
‘email@example.com (Elvis Parsley)’.
‘Elvis Parsley <firstname.lastname@example.org>’.
anglesif that doesn’t require quoting, and
parensif it does. If even
parensrequires quoting, use
Headers in this list that were previously generated by Message will be deleted before posting. Let’s say you post an article. Then you decide to post it again to some other group, you naughty boy, so you jump back to the *post-buf* buffer, edit the
Newsgroupsline, and ship it off again. By default, this variable makes sure that the old generated
Message-IDis deleted, and a new one generated. If this isn’t done, the entire empire would probably crumble, anarchy would prevail, and cats would start walking on two legs and rule the world. Allegedly.
Header lines to be inserted in outgoing messages before you edit the message, so you can edit or delete their lines. If set to a string, it is directly inserted. If set to a function, it is called and its result is inserted.
Responses to messages have subjects that start with ‘Re: ’. This is not an abbreviation of the English word “response”, but is Latin, and means “in response to”. Some illiterate nincompoops have failed to grasp this fact, and have “internationalized” their software to use abominations like ‘Aw: ’ (“antwort”) or ‘Sv: ’ (“svar”) instead, which is meaningless and evil. However, you may have to deal with users that use these evil tools, in which case you may set this variable to a regexp that matches these prefixes. Myself, I just throw away non-compliant mail.
Here’s an example of a value to deal with these headers when responding to a message:
(setq message-subject-re-regexp (concat "^[ \t]*" "\\(" "\\(" "[Aa][Nn][Tt][Ww]\\.?\\|" ; antw "[Aa][Ww]\\|" ; aw "[Ff][Ww][Dd]?\\|" ; fwd "[Oo][Dd][Pp]\\|" ; odp "[Rr][Ee]\\|" ; re "[Rr][\311\351][Ff]\\.?\\|" ; ref "[Ss][Vv]" ; sv "\\)" "\\(\\[[0-9]*\\]\\)" "*:[ \t]*" "\\)" "*[ \t]*" ))
Controls what to do with trailing ‘(was: <old subject>)’ in subject lines. If
nil, leave the subject unchanged. If it is the symbol
ask, query the user what to do. In this case, the subject is matched against
t, always strip the trailing old subject. In this case,
Regexp matching alternative email addresses. The first address in the To, Cc or From headers of the original article matching this variable is used as the From field of outgoing messages, replacing the default From value.
For example, if you have two secondary email addresses email@example.com and firstname.lastname@example.org and want to use them in the From field when composing a reply to a message addressed to one of them, you could set this variable like this:
(setq message-alternative-emails (regexp-opt '("email@example.com" "firstname.lastname@example.org")))
This variable has precedence over posting styles and anything that runs off
Specifies what to do when there are no recipients other than
Fcc. If it is
always, the posting is allowed. If it is
never, the posting is not allowed. If it is
ask(the default), you are prompted.
A regexp, a list of regexps, or a list where the first element is
notand the rest are regexps. It says which headers to keep hidden when composing a message.
(setq message-hidden-headers '(not "From" "Subject" "To" "Cc" "Newsgroups"))
Headers are hidden using narrowing, you can use M-x widen to expose them in the buffer.
A list of lists of header synonyms. E.g., if this list contains a member list with elements
message-carefully-insert-headerswill not insert a
Toheader when the message is already
Cced to the recipient.
3.2 Mail Headers
See News Headers, for the syntax of this variable. It is
(From Subject Date (optional . In-Reply-To) Message-ID (optional . User-Agent))by default.
Regexp of headers to be removed before mailing. The default is
This string is inserted at the end of the headers in all message buffers that are initialized as mail.
Variable that indicates whether ‘X-Hashcash’ headers should be computed for the message. See Hashcash in The Gnus Manual. If
opportunistic, only generate the headers when it doesn’t lead to the user having to wait.
3.3 Mail Variables
Function used to send the current buffer as mail. The default is
smtpmail-send-itaccording to the system. Other valid values include
message-send-mail-with-sendmailpipes your article to the
sendmailbinary for further queuing and sending. When your local system is not configured for sending mail using
sendmail, and you have access to a remote SMTP server, you can set
smtpmail-send-itand make sure to setup the
smtpmailpackage correctly. An example:
(setq message-send-mail-function 'smtpmail-send-it smtpmail-default-smtp-server "YOUR SMTP HOST")
To the thing similar to this, there is
message-smtpmail-send-it. It is useful if your ISP requires the POP-before-SMTP authentication. See POP before SMTP in The Gnus Manual.
If you have a complex SMTP setup, and want some messages to go via one mail server, and other messages to go through another, you can use the ‘X-Message-SMTP-Method’ header. These are the supported values:
X-Message-SMTP-Method: smtp smtp.fsf.org 587
This will send the message via ‘smtp.fsf.org’, using port 587.
X-Message-SMTP-Method: smtp smtp.fsf.org 587 other-user
This is the same as the above, but uses ‘other-user’ as the user name when authenticating. This is handy if you have several SMTP accounts on the same server.
This will send the message via the locally installed sendmail/exim/etc installation.
Most versions of MH doesn’t like being fed messages that contain the headers in this variable. If this variable is non-
nil(which is the default), these headers will be removed before mailing when sending messages via MH. Set it to
nilif your MH can handle these headers.
Location of the qmail-inject program.
Arguments passed to qmail-inject programs. This should be a list of strings, one string for each argument. It may also be a function.
E.g., if you wish to set the envelope sender address so that bounces go to the right place or to deal with listserv’s usage of that address, you might set this variable to
nilmeans don’t add ‘-f username’ to the sendmail command line. Doing so would be even more evil than leaving it out.
nil, this specifies the address to use in the SMTP envelope. If it is
user-mail-address. If it is the symbol
header, use the ‘From’ header of the message.
Set this to non-
nilif the system’s mailer runs the header and body together. (This problem exists on SunOS 4 when sendmail is run in remote mode.) The value should be an expression to test whether the problem will actually occur.
The limitation of messages sent as message/partial. The lower bound of message size in characters, beyond which the message should be sent in several parts. If it is
nil(which is the default), the size is unlimited.
3.4 News Headers
message-required-news-headers a list of header symbols. These
headers will either be automatically generated, or, if that’s
impossible, they will be prompted for. The following symbols are valid:
This required header will be filled out with the result of the
message-make-fromfunction, which depends on the
This required header will be prompted for if not present already.
This required header says which newsgroups the article is to be posted to. If it isn’t present already, it will be prompted for.
This optional header will be filled out depending on the
message-user-organization-filewill be used if this variable is
t. This variable can also be a string (in which case this string will be used), or it can be a function (which will be called with no parameters and should return a string to be used).
This optional header will be computed by Message.
This required header will be generated by Message. A unique ID will be created based on the date, time, user name (for the local part) and the domain part. For the domain part, message will look (in this order) at
user-mail-address) until a probably valid fully qualified domain name (FQDN) was found.
This optional header will be filled out according to the
This optional header is filled out using the
Fromheader of the article being replied to.
This extremely optional header will be inserted according to the
message-expiresvariable. It is highly deprecated and shouldn’t be used unless you know what you’re doing.
This optional header is filled out according to the
message-distribution-functionvariable. It is a deprecated and much misunderstood header.
This extremely optional header should probably never be used. However, some very old servers require that this header is present.
message-user-pathfurther controls how this
Pathheader is to look. If it is
nil, use the server name as the leaf node. If it is a string, use the string. If it is neither a string nor
nil, use the user name only. However, it is highly unlikely that you should need to fiddle with this variable at all.
In addition, you can enter conses into this list. The CAR of this cons
should be a symbol. This symbol’s name is the name of the header, and
the CDR can either be a string to be entered verbatim as the value of
this header, or it can be a function to be called. This function should
take no arguments, and return a string to be inserted. For
instance, if you want to insert
Mime-Version: 1.0, you should
(Mime-Version . "1.0") into the list.
If the list contains a cons where the CAR of the cons is
optional, the CDR of this cons will only be inserted if it is
If you want to delete an entry from this list, the following Lisp snippet might be useful. Adjust accordingly if you want to remove another element.
(setq message-required-news-headers (delq 'Message-ID message-required-news-headers))
Other variables for customizing outgoing news articles:
Controls what syntax checks should not be performed on outgoing posts. To disable checking of long signatures, for instance, add
(signature . disabled)
to this list.
Valid checks are:
Check whether the article has an
Approvedheader, which is something only moderators should include.
Check whether there are continuation header lines that don’t begin with whitespace.
Check for invalid characters.
Check whether the article is empty.
Check whether the newsgroups mentioned in the
Check whether the
Fromheader seems nice.
Check whether there is any non-printable character in the body.
Check whether there is any invisible text in the buffer.
Check for too long header lines.
Check for too long lines in the body.
Check whether the
Message-IDlooks syntactically ok.
Check for the existence of multiple equal headers.
Check whether there is any new text in the messages.
Check whether the
Newsgroupsheader exists and is not empty.
Check whether text follows last quoted portion.
Check whether the
Followup-toheaders contains repeated group names.
Check whether the
Reply-Toheader looks ok.
Insert a new
Senderheader if the
Fromheader looks odd.
Check for the existence of version and sendsys commands.
Check whether the domain part of the
Message-IDheader looks ok.
Check whether to add a
Followup-toheader to shorten the number of groups to post to.
Check the length of the signature.
Check for excessive size.
Check whether the
Subjectheader exists and is not empty.
Check the subject for commands.
Check whether the
Followup-toheaders are valid syntactically.
All these conditions are checked by default, except for
senderfor which the check is disabled by default if
nil(see Canceling News).
Regexp of headers to be removed before posting. The default is
This string is inserted at the end of the headers in all message buffers that are initialized as news.
3.5 News Variables
Function used to send the current buffer as news. The default is
Gnusish select method (see the Gnus manual for details) used for posting a prepared news message.
3.6 Insertion Variables
The overall style to be used when replying to messages. This controls things like where the reply should be put relative to the original, how the citation is formatted, where the signature goes, etc.
Value is either
nil(no variable overrides) or a let-style list of pairs
(VARIABLE VALUE)to override default values.
gnus-posting-stylesto set this variable for specific groups. Presets to impersonate popular mail agents are available in the
Where the reply should be positioned. Available styles are
traditionalto reply inline,
abovefor top-posting, and
All headers that match this regexp will be removed from yanked messages. The default is ‘.’, which means that all headers will be removed.
Regexp matching the longest possible citation prefix on a line.
Function called to insert the citation line. The default is
message-insert-citation-line, which will lead to citation lines that look like:
Hallvard B Furuseth <email@example.com> writes:
Point will be at the beginning of the body of the message when this function is called.
Note that Gnus provides a feature where clicking on ‘writes:’ hides the cited text. If you change the citation line too much, readers of your messages will have to adjust their Gnus, too. See the variable
gnus-cite-attribution-suffix. See Article Highlighting in The Gnus Manual, for details.
When you are replying to or following up an article, you normally want to quote the person you are answering. Inserting quoted text is done by yanking, and each line you yank will have
message-yank-prefixprepended to it (except for quoted lines which use
message-yank-cited-prefixand empty lines which use
message-yank-empty-prefix). The default is ‘> ’.
When yanking text from an article which contains already cited text, each line will be prefixed with the contents of this variable. The default is ‘>’. See also
When yanking text from an article, each empty line will be prefixed with the contents of this variable. The default is ‘>’. You can set this variable to an empty string to split the cited text into paragraphs automatically. See also
Number of spaces to indent yanked messages.
Function for citing an original message. The default is
message-cite-original, which simply inserts the original message and prepends ‘> ’ to each line.
message-cite-original-without-signaturedoes the same, but elides the signature.
Function for modifying a citation just inserted in the mail buffer. This can also be a list of functions. Each function can find the citation between
(mark t). And each function should leave point and mark around the citation text as modified.
String to mark the beginning of some inserted text.
String to mark the end of some inserted text.
String to be inserted at the end of the message buffer. If
t(which is the default), the
message-signature-filefile will be inserted instead. If a function, the result from the function will be used instead. If a form, the result from the form will be used instead. If this variable is
nil, no signature will be inserted at all.
File containing the signature to be inserted at the end of the buffer. If a path is specified, the value of
message-signature-directoryis ignored, even if set. The default is ~/.signature.
Name of directory containing signature files. Comes in handy if you have many such files, handled via Gnus posting styles for instance. If
message-signature-fileis expected to specify the directory if needed.
t(the default value) an empty line is inserted before the signature separator.
Note that RFC1036bis says that a signature should be preceded by the three characters ‘-- ’ on a line by themselves. This is to make it easier for the recipient to automatically recognize and process the signature. So don’t remove those characters, even though you might feel that they ruin your beautiful design, like, totally.
Also note that no signature should be more than four lines long. Including ASCII graphics is an efficient way to get everybody to believe that you are silly and have nothing important to say.
3.7 Various Message Variables
Symbol naming a MIME charset. Non-ASCII characters in messages are assumed to be encoded using this charset. The default is
iso-8859-1on non-MULE Emacsen; otherwise
nil, which means ask the user. (This variable is used only on non-MULE Emacsen.) See Charset Translation in Emacs MIME Manual, for details on the MULE-to-MIME translation process.
Local value for the column beyond which automatic line-wrapping should happen for message buffers. If non-
nil(the default), also turn on auto-fill in message buffers.
Regexp matching the signature separator. It is ‘^-- *$’ by default.
String used to separate the headers from the body. It is ‘--text follows this line--’ by default.
Directory used by many mailish things. The default is ~/Mail/. All other mail file variables are derived from
Directory where Message auto-saves buffers if Gnus isn’t running. If
nil, Message won’t auto-save. The default is ~/Mail/drafts/.
Hook run when initializing the message buffer. It is run after the headers have been inserted but before the signature has been inserted.
Hook run as the last thing when the message buffer has been initialized, but before yanked text is inserted.
Hook called narrowed to the headers after initializing the headers.
For instance, if you’re running Gnus and wish to insert a ‘Mail-Copies-To’ header in all your news articles and all messages you send to mailing lists, you could do something like the following:
(defun my-message-header-setup-hook () (let ((group (or gnus-newsgroup-name ""))) (when (or (message-fetch-field "newsgroups") (gnus-group-find-parameter group 'to-address) (gnus-group-find-parameter group 'to-list)) (insert "Mail-Copies-To: never\n")))) (add-hook 'message-header-setup-hook 'my-message-header-setup-hook)
Hook run before sending messages.
(add-hook 'message-send-hook 'my-message-add-content) (defun my-message-add-content () (message-add-header "X-In-No-Sense: Nonsense") (message-add-header "X-Whatever: no"))
This function won’t add the header if the header is already present.
Hook run before sending mail messages. This hook is run very late: just before the message is actually sent as mail.
Hook run before sending news messages. This hook is run very late: just before the message is actually sent as news.
Hook run after sending messages.
Hook run when canceling news articles.
Syntax table used in message mode buffers.
nil, don’t strip quoted text from articles that have ‘X-No-Archive’ set. Even if this variable isn’t set, you can undo the stripping by hitting the
Emacs has a number of special text properties which can break message composing in various ways. If this option is set, message will strip these properties from the message composition buffer. However, some packages requires these properties to be present in order to work. If you use one of these packages, turn this option off, and hope the message composition doesn’t break too bad.
Alist of ways to send outgoing messages. Each element has the form:
(type predicate function)
A symbol that names the method.
A function called without any parameters to determine whether the message is a message of type type. The function will be called in the buffer where the message is.
A function to be called if predicate returns non-
nil. function is called with one parameter—the prefix.
The default is:
((news message-news-p message-send-via-news) (mail message-mail-p message-send-via-mail))
message-news-pfunction returns non-
nilif the message looks like news, and the
message-send-via-newsfunction sends the message according to the
message-send-news-functionvariable (see News Variables). The
message-mail-pfunction returns non-
nilif the message looks like mail, and the
message-send-via-mailfunction sends the message according to the
message-send-mail-functionvariable (see Mail Variables).
All the elements in this alist will be tried in order, so a message containing both a valid ‘Newsgroups’ header and a valid ‘To’ header, for example, will be sent as news, and then as mail.
3.8 Sending Variables
A function called to save outgoing articles. This function will be called with the name of the file to store the article in. The default function is
message-outputwhich saves in Unix mailbox format.
When sending combined messages, this string is inserted at the start of the mailed copy. If the string contains the format spec ‘%s’, the newsgroups the article has been posted to will be inserted there. If this variable is
nil, no such courtesy message will be added. The default value is ‘"The following message is a courtesy copy of an article\\nthat has been posted to %s as well.\\n\\n"’.
nil, attach files as normal parts in Fcc copies; if it is non-
nil, attach local files as external parts.
nilwait for and display errors when sending a message; if
nillet the mailer mail back a message to report errors.
nil, Gnus will ask for confirmation when sending a message.
3.9 Message Buffers
Message will generate new buffers with unique buffer names when you request a message buffer. When you send the message, the buffer isn’t normally killed off. Its name is changed and a certain number of old message buffers are kept alive.
Controls whether to create a new message buffer to compose a message. Valid values include:
Generate the buffer name in the Message way (e.g., *mail*, *news*, *mail to whom*, *news on group*, etc.) and continue editing in the existing buffer of that name. If there is no such buffer, it will be newly created.
Create the new buffer with the name generated in the Message way.
uniquebut the buffer name begins with "*unsent ".
nilbut the buffer name is simpler like *mail message*.
If this is a function, call that function with three parameters: The type, the To address and the group name (any of these may be
nil). The function should return the new buffer name.
The default value is
This variable says how many old message buffers to keep. If there are more message buffers than this, the oldest buffer will be killed. The default is 10. If this variable is
nil, no old message buffers will ever be killed.
After sending a message, the buffer is renamed from, for instance, ‘*reply to Lars*’ to ‘*sent reply to Lars*’. If you don’t like this, set this variable to a function that renames the buffer in a manner you like. If you don’t want to rename the buffer at all, you can say:
(setq message-send-rename-function 'ignore)
nil, kill the buffer immediately on exit.
3.10 Message Actions
When Message is being used from a news/mail reader, the reader is likely to want to perform some task after the message has been sent. Perhaps return to the previous window configuration or mark an article as replied.
The user may exit from the message buffer in various ways. The most
common is C-c C-c, which sends the message and exits. Other
possibilities are C-c C-s which just sends the message, C-c
C-d which postpones the message editing and buries the message buffer,
and C-c C-k which kills the message buffer. Each of these actions
have lists associated with them that contains actions to be executed:
Message provides a function to interface with these lists:
message-add-action. The first parameter is the action to be
added, and the rest of the arguments are which lists to add this action
to. Here’s an example from Gnus:
(message-add-action `(set-window-configuration ,(current-window-configuration)) 'exit 'postpone 'kill)
This restores the Gnus window configuration when the message buffer is killed, postponed or exited.
An action can be either: a normal function, or a list where the
CAR is a function and the CDR is the list of arguments, or
a form to be
Message uses virtually only its own variables—older
variables aren’t consulted. To force Message to take those variables
into account, you can put the following in your .emacs file:
This will initialize many Message variables from the values in the corresponding mail variables.
|• Responses:||Standard rules for determining where responses go.|
To determine where a message is to go, the following algorithm is used by default.
A reply is when you want to respond just to the person who sent the message via mail. There will only be one recipient. To determine who the recipient will be, the following headers are consulted, in turn:
- wide reply
A wide reply is a mail response that includes all entities mentioned in the message you are responding to. All mailboxes from the following headers will be concatenated to form the outgoing
(unless there’s a
Reply-To, in which case that is used instead).
Mail-Copies-Toheader is present, it will also be included in the list of mailboxes. If this header is ‘never’, that means that the
Reply-To) mailbox will be suppressed.
A followup is a response sent via news. The following headers (listed in order of precedence) determine where the response is to be sent:
Mail-Copies-Toheader is present, it will be used as the basis of the new
Ccheader, except if this header is ‘never’.
6 GNU Free Documentation License
Copyright © 2000, 2001, 2002, 2007, 2008 Free Software Foundation, Inc. http://fsf.org/ Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.
The purpose of this License is to make a manual, textbook, or other functional and useful document free in the sense of freedom: to assure everyone the effective freedom to copy and redistribute it, with or without modifying it, either commercially or noncommercially. Secondarily, this License preserves for the author and publisher a way to get credit for their work, while not being considered responsible for modifications made by others.
This License is a kind of “copyleft”, which means that derivative works of the document must themselves be free in the same sense. It complements the GNU General Public License, which is a copyleft license designed for free software.
We have designed this License in order to use it for manuals for free software, because free software needs free documentation: a free program should come with manuals providing the same freedoms that the software does. But this License is not limited to software manuals; it can be used for any textual work, regardless of subject matter or whether it is published as a printed book. We recommend this License principally for works whose purpose is instruction or reference.
- APPLICABILITY AND DEFINITIONS
This License applies to any manual or other work, in any medium, that contains a notice placed by the copyright holder saying it can be distributed under the terms of this License. Such a notice grants a world-wide, royalty-free license, unlimited in duration, to use that work under the conditions stated herein. The “Document”, below, refers to any such manual or work. Any member of the public is a licensee, and is addressed as “you”. You accept the license if you copy, modify or distribute the work in a way requiring permission under copyright law.
A “Modified Version” of the Document means any work containing the Document or a portion of it, either copied verbatim, or with modifications and/or translated into another language.
A “Secondary Section” is a named appendix or a front-matter section of the Document that deals exclusively with the relationship of the publishers or authors of the Document to the Document’s overall subject (or to related matters) and contains nothing that could fall directly within that overall subject. (Thus, if the Document is in part a textbook of mathematics, a Secondary Section may not explain any mathematics.) The relationship could be a matter of historical connection with the subject or with related matters, or of legal, commercial, philosophical, ethical or political position regarding them.
The “Invariant Sections” are certain Secondary Sections whose titles are designated, as being those of Invariant Sections, in the notice that says that the Document is released under this License. If a section does not fit the above definition of Secondary then it is not allowed to be designated as Invariant. The Document may contain zero Invariant Sections. If the Document does not identify any Invariant Sections then there are none.
The “Cover Texts” are certain short passages of text that are listed, as Front-Cover Texts or Back-Cover Texts, in the notice that says that the Document is released under this License. A Front-Cover Text may be at most 5 words, and a Back-Cover Text may be at most 25 words.
A “Transparent” copy of the Document means a machine-readable copy, represented in a format whose specification is available to the general public, that is suitable for revising the document straightforwardly with generic text editors or (for images composed of pixels) generic paint programs or (for drawings) some widely available drawing editor, and that is suitable for input to text formatters or for automatic translation to a variety of formats suitable for input to text formatters. A copy made in an otherwise Transparent file format whose markup, or absence of markup, has been arranged to thwart or discourage subsequent modification by readers is not Transparent. An image format is not Transparent if used for any substantial amount of text. A copy that is not “Transparent” is called “Opaque”.
Examples of suitable formats for Transparent copies include plain ASCII without markup, Texinfo input format, LaTeX input format, SGML or XML using a publicly available DTD, and standard-conforming simple HTML, PostScript or PDF designed for human modification. Examples of transparent image formats include PNG, XCF and JPG. Opaque formats include proprietary formats that can be read and edited only by proprietary word processors, SGML or XML for which the DTD and/or processing tools are not generally available, and the machine-generated HTML, PostScript or PDF produced by some word processors for output purposes only.
The “Title Page” means, for a printed book, the title page itself, plus such following pages as are needed to hold, legibly, the material this License requires to appear in the title page. For works in formats which do not have any title page as such, “Title Page” means the text near the most prominent appearance of the work’s title, preceding the beginning of the body of the text.
The “publisher” means any person or entity that distributes copies of the Document to the public.
A section “Entitled XYZ” means a named subunit of the Document whose title either is precisely XYZ or contains XYZ in parentheses following text that translates XYZ in another language. (Here XYZ stands for a specific section name mentioned below, such as “Acknowledgements”, “Dedications”, “Endorsements”, or “History”.) To “Preserve the Title” of such a section when you modify the Document means that it remains a section “Entitled XYZ” according to this definition.
The Document may include Warranty Disclaimers next to the notice which states that this License applies to the Document. These Warranty Disclaimers are considered to be included by reference in this License, but only as regards disclaiming warranties: any other implication that these Warranty Disclaimers may have is void and has no effect on the meaning of this License.
- VERBATIM COPYING
You may copy and distribute the Document in any medium, either commercially or noncommercially, provided that this License, the copyright notices, and the license notice saying this License applies to the Document are reproduced in all copies, and that you add no other conditions whatsoever to those of this License. You may not use technical measures to obstruct or control the reading or further copying of the copies you make or distribute. However, you may accept compensation in exchange for copies. If you distribute a large enough number of copies you must also follow the conditions in section 3.
You may also lend copies, under the same conditions stated above, and you may publicly display copies.
- COPYING IN QUANTITY
If you publish printed copies (or copies in media that commonly have printed covers) of the Document, numbering more than 100, and the Document’s license notice requires Cover Texts, you must enclose the copies in covers that carry, clearly and legibly, all these Cover Texts: Front-Cover Texts on the front cover, and Back-Cover Texts on the back cover. Both covers must also clearly and legibly identify you as the publisher of these copies. The front cover must present the full title with all words of the title equally prominent and visible. You may add other material on the covers in addition. Copying with changes limited to the covers, as long as they preserve the title of the Document and satisfy these conditions, can be treated as verbatim copying in other respects.
If the required texts for either cover are too voluminous to fit legibly, you should put the first ones listed (as many as fit reasonably) on the actual cover, and continue the rest onto adjacent pages.
If you publish or distribute Opaque copies of the Document numbering more than 100, you must either include a machine-readable Transparent copy along with each Opaque copy, or state in or with each Opaque copy a computer-network location from which the general network-using public has access to download using public-standard network protocols a complete Transparent copy of the Document, free of added material. If you use the latter option, you must take reasonably prudent steps, when you begin distribution of Opaque copies in quantity, to ensure that this Transparent copy will remain thus accessible at the stated location until at least one year after the last time you distribute an Opaque copy (directly or through your agents or retailers) of that edition to the public.
It is requested, but not required, that you contact the authors of the Document well before redistributing any large number of copies, to give them a chance to provide you with an updated version of the Document.
You may copy and distribute a Modified Version of the Document under the conditions of sections 2 and 3 above, provided that you release the Modified Version under precisely this License, with the Modified Version filling the role of the Document, thus licensing distribution and modification of the Modified Version to whoever possesses a copy of it. In addition, you must do these things in the Modified Version:
- Use in the Title Page (and on the covers, if any) a title distinct from that of the Document, and from those of previous versions (which should, if there were any, be listed in the History section of the Document). You may use the same title as a previous version if the original publisher of that version gives permission.
- List on the Title Page, as authors, one or more persons or entities responsible for authorship of the modifications in the Modified Version, together with at least five of the principal authors of the Document (all of its principal authors, if it has fewer than five), unless they release you from this requirement.
- State on the Title page the name of the publisher of the Modified Version, as the publisher.
- Preserve all the copyright notices of the Document.
- Add an appropriate copyright notice for your modifications adjacent to the other copyright notices.
- Include, immediately after the copyright notices, a license notice giving the public permission to use the Modified Version under the terms of this License, in the form shown in the Addendum below.
- Preserve in that license notice the full lists of Invariant Sections and required Cover Texts given in the Document’s license notice.
- Include an unaltered copy of this License.
- Preserve the section Entitled “History”, Preserve its Title, and add to it an item stating at least the title, year, new authors, and publisher of the Modified Version as given on the Title Page. If there is no section Entitled “History” in the Document, create one stating the title, year, authors, and publisher of the Document as given on its Title Page, then add an item describing the Modified Version as stated in the previous sentence.
- Preserve the network location, if any, given in the Document for public access to a Transparent copy of the Document, and likewise the network locations given in the Document for previous versions it was based on. These may be placed in the “History” section. You may omit a network location for a work that was published at least four years before the Document itself, or if the original publisher of the version it refers to gives permission.
- For any section Entitled “Acknowledgements” or “Dedications”, Preserve the Title of the section, and preserve in the section all the substance and tone of each of the contributor acknowledgements and/or dedications given therein.
- Preserve all the Invariant Sections of the Document, unaltered in their text and in their titles. Section numbers or the equivalent are not considered part of the section titles.
- Delete any section Entitled “Endorsements”. Such a section may not be included in the Modified Version.
- Do not retitle any existing section to be Entitled “Endorsements” or to conflict in title with any Invariant Section.
- Preserve any Warranty Disclaimers.
If the Modified Version includes new front-matter sections or appendices that qualify as Secondary Sections and contain no material copied from the Document, you may at your option designate some or all of these sections as invariant. To do this, add their titles to the list of Invariant Sections in the Modified Version’s license notice. These titles must be distinct from any other section titles.
You may add a section Entitled “Endorsements”, provided it contains nothing but endorsements of your Modified Version by various parties—for example, statements of peer review or that the text has been approved by an organization as the authoritative definition of a standard.
You may add a passage of up to five words as a Front-Cover Text, and a passage of up to 25 words as a Back-Cover Text, to the end of the list of Cover Texts in the Modified Version. Only one passage of Front-Cover Text and one of Back-Cover Text may be added by (or through arrangements made by) any one entity. If the Document already includes a cover text for the same cover, previously added by you or by arrangement made by the same entity you are acting on behalf of, you may not add another; but you may replace the old one, on explicit permission from the previous publisher that added the old one.
The author(s) and publisher(s) of the Document do not by this License give permission to use their names for publicity for or to assert or imply endorsement of any Modified Version.
- COMBINING DOCUMENTS
You may combine the Document with other documents released under this License, under the terms defined in section 4 above for modified versions, provided that you include in the combination all of the Invariant Sections of all of the original documents, unmodified, and list them all as Invariant Sections of your combined work in its license notice, and that you preserve all their Warranty Disclaimers.
The combined work need only contain one copy of this License, and multiple identical Invariant Sections may be replaced with a single copy. If there are multiple Invariant Sections with the same name but different contents, make the title of each such section unique by adding at the end of it, in parentheses, the name of the original author or publisher of that section if known, or else a unique number. Make the same adjustment to the section titles in the list of Invariant Sections in the license notice of the combined work.
In the combination, you must combine any sections Entitled “History” in the various original documents, forming one section Entitled “History”; likewise combine any sections Entitled “Acknowledgements”, and any sections Entitled “Dedications”. You must delete all sections Entitled “Endorsements.”
- COLLECTIONS OF DOCUMENTS
You may make a collection consisting of the Document and other documents released under this License, and replace the individual copies of this License in the various documents with a single copy that is included in the collection, provided that you follow the rules of this License for verbatim copying of each of the documents in all other respects.
You may extract a single document from such a collection, and distribute it individually under this License, provided you insert a copy of this License into the extracted document, and follow this License in all other respects regarding verbatim copying of that document.
- AGGREGATION WITH INDEPENDENT WORKS
A compilation of the Document or its derivatives with other separate and independent documents or works, in or on a volume of a storage or distribution medium, is called an “aggregate” if the copyright resulting from the compilation is not used to limit the legal rights of the compilation’s users beyond what the individual works permit. When the Document is included in an aggregate, this License does not apply to the other works in the aggregate which are not themselves derivative works of the Document.
If the Cover Text requirement of section 3 is applicable to these copies of the Document, then if the Document is less than one half of the entire aggregate, the Document’s Cover Texts may be placed on covers that bracket the Document within the aggregate, or the electronic equivalent of covers if the Document is in electronic form. Otherwise they must appear on printed covers that bracket the whole aggregate.
Translation is considered a kind of modification, so you may distribute translations of the Document under the terms of section 4. Replacing Invariant Sections with translations requires special permission from their copyright holders, but you may include translations of some or all Invariant Sections in addition to the original versions of these Invariant Sections. You may include a translation of this License, and all the license notices in the Document, and any Warranty Disclaimers, provided that you also include the original English version of this License and the original versions of those notices and disclaimers. In case of a disagreement between the translation and the original version of this License or a notice or disclaimer, the original version will prevail.
If a section in the Document is Entitled “Acknowledgements”, “Dedications”, or “History”, the requirement (section 4) to Preserve its Title (section 1) will typically require changing the actual title.
You may not copy, modify, sublicense, or distribute the Document except as expressly provided under this License. Any attempt otherwise to copy, modify, sublicense, or distribute it is void, and will automatically terminate your rights under this License.
However, if you cease all violation of this License, then your license from a particular copyright holder is reinstated (a) provisionally, unless and until the copyright holder explicitly and finally terminates your license, and (b) permanently, if the copyright holder fails to notify you of the violation by some reasonable means prior to 60 days after the cessation.
Moreover, your license from a particular copyright holder is reinstated permanently if the copyright holder notifies you of the violation by some reasonable means, this is the first time you have received notice of violation of this License (for any work) from that copyright holder, and you cure the violation prior to 30 days after your receipt of the notice.
Termination of your rights under this section does not terminate the licenses of parties who have received copies or rights from you under this License. If your rights have been terminated and not permanently reinstated, receipt of a copy of some or all of the same material does not give you any rights to use it.
- FUTURE REVISIONS OF THIS LICENSE
The Free Software Foundation may publish new, revised versions of the GNU Free Documentation License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. See http://www.gnu.org/copyleft/.
Each version of the License is given a distinguishing version number. If the Document specifies that a particular numbered version of this License “or any later version” applies to it, you have the option of following the terms and conditions either of that specified version or of any later version that has been published (not as a draft) by the Free Software Foundation. If the Document does not specify a version number of this License, you may choose any version ever published (not as a draft) by the Free Software Foundation. If the Document specifies that a proxy can decide which future versions of this License can be used, that proxy’s public statement of acceptance of a version permanently authorizes you to choose that version for the Document.
“Massive Multiauthor Collaboration Site” (or “MMC Site”) means any World Wide Web server that publishes copyrightable works and also provides prominent facilities for anybody to edit those works. A public wiki that anybody can edit is an example of such a server. A “Massive Multiauthor Collaboration” (or “MMC”) contained in the site means any set of copyrightable works thus published on the MMC site.
“CC-BY-SA” means the Creative Commons Attribution-Share Alike 3.0 license published by Creative Commons Corporation, a not-for-profit corporation with a principal place of business in San Francisco, California, as well as future copyleft versions of that license published by that same organization.
“Incorporate” means to publish or republish a Document, in whole or in part, as part of another Document.
An MMC is “eligible for relicensing” if it is licensed under this License, and if all works that were first published under this License somewhere other than this MMC, and subsequently incorporated in whole or in part into the MMC, (1) had no cover texts or invariant sections, and (2) were thus incorporated prior to November 1, 2008.
The operator of an MMC Site may republish an MMC contained in the site under CC-BY-SA on the same site at any time before August 1, 2009, provided the MMC is eligible for relicensing.
ADDENDUM: How to use this License for your documents
To use this License in a document you have written, include a copy of the License in the document and put the following copyright and license notices just after the title page:
Copyright (C) year your name. Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.3 or any later version published by the Free Software Foundation; with no Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts. A copy of the license is included in the section entitled ``GNU Free Documentation License''.
If you have Invariant Sections, Front-Cover Texts and Back-Cover Texts, replace the “with…Texts.” line with this:
with the Invariant Sections being list their titles, with the Front-Cover Texts being list, and with the Back-Cover Texts being list.
If you have Invariant Sections without Cover Texts, or some other combination of the three, merge those two alternatives to suit the situation.
If your document contains nontrivial examples of program code, we recommend releasing these examples in parallel under your choice of free software license, such as the GNU General Public License, to permit their use in free software.
|Jump to:||A C D E F G I L M N O P Q R S U X Y|
|Jump to:||A C D E F G I L M N O P Q R S U X Y|
8 Key Index
|Jump to:||C M T|
|Jump to:||C M T|