Associate members power up the Free Software Foundation. Help smash our goal of 700 new members or donate by December 31st!

Join

$34,826
$450,000

What is new in XBoard/WinBoard 4.9.0?

New features in this release

New variant support

Follow-up

Preceding release (4.8.0)

Experimental and future stuff

The following features are new in XBoard 4.9.0:

EPD test suites

A new volatile option -epd will switch XBoard in EPD mode for the duration of the session. In this mode all games will be terminated after a single move. This move will then be compared with the best-move (bm) or avoid-move (am) fields from the EPD position specification from which the game started, and counters will be kept of the number of good and wrong solutions thus given by the engine. XBoard can thus be used to run an EPD test suite, through a command like "xboard -epd -mg 100 -lpf STS1.epd -lpi -1 -fcp crafty" to solve the first 100 test positions on the STS1.epd file with the Crafty engine at the default time control. The results of the test suite will be reported in the second pane of the Engine Output window, and as the 'match' result in the title bar: finding a correct best move will be counted as a win, playing an avoid move as a loss, and all other moves as draws.

Selecting a piece with the mouse wheel

In Edit Position mode, operating the mouse wheel above a square now creates a piece in that square, or changes the identity of that piece, making it run through the entire set of pieces participating in the current variant. This is especially useful in variants with many piece types, where sweep selection becomes problematic due to lack of space to move the mouse.

What if your mouse only has a single button?

Setting up a position required the right mouse button ('button 3' in Linux) to put new pieces on the board. The option -monoMouse can allow XBoard to use the left button for this. In that case clicking over an empty square will behave like it was a right-click, and will create a piece in that square. Clicking over an occupied square will select or grab the piece, as usual for left-clicks.

Your favorite starting positions

A new option -positionDir can force the file-selector dialog that pops up in response to Load Position to start browsing in the specified directory, rather than in the current directory. This can be useful when you have a favorite set of positions from which you often start games, e.g. for several material-odds positions.

Clicking menus and dialog texts for instant help

All text labels in dialogs and the main pop-down menu items can now be right-clicked, in order to pop up a text box with the description of their function from the manual. The man page has been largely rewritten and re-organized to make sure most items produce satisfactory help this way.

Fractions in the time-control parameters

The spin controls in the Time Control dialog of XBoard's GTK build do not allow entering non-integer values, which precluded setting base times like 0:30 (for 30 sec) or increments like 0.1 (sec). To work around that there now is a divide-by-60 checkbox in that dialog, which allows you to enter base times in seconds and increments in units of 1/60 seconds.

Engine Settings on the engine's demand

It was already possible for an engine to cause pop up of a message, or a simple question. Now engines can modify their settings dialog after startup, and force it to pop up. This is triggered by the 'feature done=N' command, where a meaning has been given to new values of N. XBoard will now erase the engine's option list on receiving done=0, so that the engine can redefine the settings, or even the options itself, by resending 'feature option' commands. Ending such a resent option list with "feature done=1" will now cause the contents of an open settings dialog to be updated. Ending it with done=2 will alert XBoard that the list of options itself changed, and force it to close and re-open a dialog that was already open. Ending with done=3 will even open a redesigned dialog when no dialog was up before, allowing the engine to ask for attention.

Getting rid of the xterm window in ICS play

The console from which XBoard was started was historically used as text window to interact with the Internet Chess Server. But the ICS Chat/Console window now fulfills the same function. So not being able to read from or write to the terminal is no longer a fatal error, and XBoard can be started in ICS mode without terminal, provided the ICS Chat/Console window is open. This window now also hides the password you are typing, and prevents you from recalling it with the arrow keys.

Controlling castling and e.p. rights in Edit Position mode

XBoard has long since been made castling-aware, but the castling rights could only be fully controlled by pasting a FEN. In Edit Position mode a simplistic heuristic was used to assign such rights: King and Rooks on their normal starting square would be assumed to not have moved. This is usually the case, but not always, and setting up those exceptional positions was not possible. And set up positions never had the right to e.p. capture.

Now it has been made possible to grant or revoke castling or e.p. rights to arbitrary pieces. By first selecting a Rook, King or Pawn in Edit Position mode with a left-click, and then clicking it again, the assignment of rights to that piece will be reversed. The new state of the piece will be displayed in the message field, so you won't lose track. By endowing a Pawn with rights you will indicate it has just been double-pushed, and e.p. rights to capture it will be assigned to the position. Kings and Rooks created by a right-click in a square will be assumed to have rights based on the old heuristic, but Kings and Rooks put on their starting square by moving them there will be assumed to have moved.

Auto-install of board themes

A new option -installTheme has been added, which can be put into XBoard's master settings file when installing a package with new piece images and/or board textures, to make a selection item for this board theme automatically appear in XBoard's themes listbox. This opens the possibility for easy packaging and distribution of board themes.

A dialog to alter XBoard's font settings interactively

In the GTK build fonts have names that can be handled by mortals, like "Sans Bold 10" for a 10-point bold sans-serif font. It has thus become sensible to set them through a dialog. (In WinBoard this has of course been long since possible.) XBoard's new Fonts dialog allows you to type the name of a pango font in a text edit, or operate four buttons: to increase or decrease the point size, or to toggle the 'bold' or 'italic' font attributes. Operating the buttons changes the font name in the preceding text edit accordingly, and actually displays that name in the font it represents, so the user has a preview of what he is doing.

Each window type has its own font control, so that the user can use a monospace font in windows where columnar output is expected (such as the ICS Chat/Console, use a figurine font where mostly moves are displayed (Engine Output or Move History), etc.

Persistent sizing and font selection in XBoard's GTK build

Sizing the window now not only affects the board part of XBoard's main window, but also the fonts chosen in clocks and message above the board, making the clock and message area size too. (Just like WinBoard has always been doing.) This also makes it possible to size the board much smaller than it initial size, as the default fonts get smaller as the board shrinks. This eventually makes the board look just as it would look when you would start it in the final size. This consistent board size is now saved in the settings file, so that next time you will indeed start up with almost the same board as the sized one (except some rounding of the square size to one of the 18 standard sizes).

For the fonts in other windows it is not so obvious that you want them to change when the board window is resized, although the default fonts for these windows does depend on board size. Therefore a more subtle algorithm is used for those: XBoard keeps track of whether the font used for each size is the default for that size, or a font that once was defined by the user through a command-line option or the Fonts dialog, (and possibly transfered through the settings file). Such non-default fonts will then be adhered to after sizing the board window when no explicitly specified font for the new size did exist yet. Meaning that you would only have to select a new font for each window once, after which it will be kept no matter how you size the board. Unless you take explicit action to select a separate font for each board size.

Making a sound during analysis

The move sound can now also be played when a new PV arrives in Analyze mode (where normal moving does not take place). A new option -analysisBell DELAY can specify a DELAY in seconds, and any line of engine thinking output that arrives after this delay will cause the move sound to be played. Setting the value to zero will disable move sounds during analysis.

Preview of board and pieces while browsing

The GTK file chooser has been streamlined a bit. To easily reach the piece images and board textures that are installed with XBoard's standard packages, which keep their files in cumbersome-to-reach places like /usr/local/share/games/xboard/themes the directories 'textures', 'themes' (for piece themes) and 'xboard' (for other data files) have been added to the 'Places' list at the left side of the file chooser. In addition, textures or piece themes that you select there (by single as well as double clicking) will be applied instantly to the board for a 'preview'. This allows you to judge them in the context they would be used. When you would finally decide not to use them after all, by selecting another, or leaving the file chooser or Board dialog by pressing 'Cancel', the board will revert to the original color and pieces. So at all times you can be aware of exactly what you are OK-ing through the Board dialog. (But... be sure the popup dialogs do not cover the board!)

Tailoring board themes and the ICS Test Menu

The Board dialog allows you to add the current combination of graphics settings (colors, textures, piece images) to the list of predefined themes. Occasionally you would want to fine-tune that list to your needs, however. E.g. deleting themes you got tired of, re-ordering them, or perhaps organize them as collapsable groups by adding "# GROUPNAME" and "# end" tags in the list. Or add options to the theme not normally included, or on the contrary remove options you don't want affected, e.g. to create themes that only affect the board and not the pieces. So far this could only be done by editing your settings file (the -themeNames option in it). But now XBoard has a menu item to pop up a general-purpose edit window for this.

A similar Edit window can be called up by another menu item, to alter the ICS Text Menu, stored in the settings file as the -icsMenu option. This makes it a lot easier to add new buttons to it (or delete the buttons you never use).

New variant support

22 New piece types

The number of piece types in XBoard has been expanded from 44 to 66. The order of the pieces beyond the first 22 in the -pieceToCharTable option, which was never officially defined, (as those pieces were only used in Chu Shogi), is now established as well. This ordering is depicted in the image. XBoard distinguishes primary and secondary pieces (the latter indicated on purple background). To make pieceToCharTables compatible with future expansion of the number of primary pieces, a slash '/' in this table indicates that the pieces following it are from the secondary series (except for King, which is always the last piece of each color). These secondary pieces are assumed to be less generally useful, satisfying very specific needs of some Shogi variants, and would thus hardly be needed.

All pieces have a default image in XBoard, scalable to all square sizes. WinBoard, however, does not have built-in bitmaps for most unorthodox pieces for square sizes other than 33x33 ('petite'), 49x49 ('middling') and 72x72 ('bulky'), and no bitmaps for the pieces on green or purple background in any size. WinBoard can load images for all pieces from external bitmap files, however. The name of these files in the pieceImageDirectory should be pieceNN_SSo.bmp, pieceNN_SSs.bmp, and pieceNN_SSw.bmp, (for the outline, solid and background image), with SS the square size (e.g. 49), and NN the number of the pieces in the pieceToCharTable ordering (0-65). Pieces shown in black in XBoard are duplicats of other pieces in the default piece theme, but in principle have different names for their image files, so that in other themes they could be different. (This is useful in Shogi, where the same piece sometimes has a different name written on it.)

Note that the Lance and Lion image occur on two different pieces; This because the pieces originally using these images have special properties in XBoard. The Lance is considered an alternative Pawn, and thus is assumed to promote (with full promotion choice) when reaching last rank. The Lion is subject to rules that restrict its trading. The duplicats are added so that these pictograms can also be used for pieces not having this property.

Beating the alphabet

Some Shogi variants have (far) more than 26 piece types. This makes it impossible to assign a single letter as ID for the piece, for the purpose of writing its moves as SAN, or its occurrence in FEN. In XBoard this problem has now been solved by allowing pieces to be represented by 'dressed letters', a letter followed by a punctuation mark like an exclamation point or quote. So if L represents one piece, L' represents another, and L! yet another. In the future this could be extended with still other symbols (like L"), but at the moment having 3x26 = 78 possible IDs, still stretched more by the +L notation for promoted pieces, seems more than enough.

Promoting pieces, but to what?

XBoard already supported Shogi-style promotion of pieces, where each piece promotes to a fixed 'partner'. The assignment of a promotion partner was fixed, however: each piece in the first 11 of the pieceToCharTable could promote to the piece 11 places further. This was enabled by defining the ID for the latter as '+'. For reasons of backward compatibility, this is still how things work by default.

But in XBoard 4.9 a piece can be indicated by multiple characters in the pieceToCharTable, and the combination ^L defines a piece not only as a promoted type (like '+' would), but also specifies it is the promoted partner of the piece with ID 'L', which could be any other piece in the pieceToCharTable. So any piece can potentially promote to any other, redefining the fixed pairing between pieces in the first and second group of 11.

Another novelty is that pieces can also be defined with an ID *L. This has the same effect as defining it as the (unpromoted) 'L', but in addition defines the 10th piece of the secondary series as its promoted form. This allows many pieces to have the same promoted form, (as commonly occurs in large Shogi variants), without the need to have multiple representations for that promoted version.

Promotion choice, but with restrictions

XBoard assumes by default that Pawns can promote to any piece participating in the variant that is not a Pawn or King. This then is the choice the user is offered through detour or sweep promotions. It is left to the engine to refuse moves that would choose a non-allowed piece, and often the default choice (the piece obtained when not dragging the Pawn through a detour, or making a static click on the to-square) would not be the strongest piece at all.

XBoard 4.9 supports a new extension of the engine communication protocol, where an engine can send a 'choice' command in response to a 'put' or 'lift' command sent to it because the user performed a promoting move (to last rank, or to a square highlighted in magenta). This 'choice' command conveys a list of piece IDs of possible promotion choices, to which XBoard then will limit the choice offered to the user. The first mentioned piece in this list will then be the default choice.

UTF8 text inscriptions on pieces

XBoard 4.9 has a new volatile option -inscriptions, which can define an UTF8 text string. The characters in this string correspond to pieces according to the same rules as the -pieceTCharTable option. Thus defined characters will then be written on top of the corresponding piece image. In addition there is a new 'fall-back' rule for missing piece images in a user-defined -pieceImageDirectory: XBoard will first try to find an image called White/BlackTile.svg before using the piece image from the default theme.

Together, this can be used for on-the-fly creation of Shogi themes. One just provides an image of a blank tile of average size as the Tile.svg image, and no image for all pieces that are intended to use this. (For pieces like Pawn and King that need different tile size, you can still include dedicated images.) The -inscriptions argument then indicates what kanji should be written on which piece. The kanji are written in red when the piece was defined as a promoted one, and rendered upside-down for the side playing downward when pieces are flipped Shogi style.

New move-generator capabilities

XBoard 4.9 is capable to handle moves with two 'locust captures', i.e. where two pieces disappear on squares other than to which the moving piece goes. It also adopts the convention that locust capture of an own piece on the rank where the King starts will be considered a castling of the capturing piece ('King analog') with the victim ('Rook analog'), the latter ending up next to, but on the other side of the former. This allows the definition of castling (through a betza 'O' atom) on non-royal pieces, such as the 'guarding' of (extended) Omega Chess. For castlings where the King moves one step this method is also used, to resolve the ambiguity with normal King moves. Castlings defined through an 'O' atom are not necessarily with the piece furthest away from the King (or other castling piece), but one or more 'j' prefixes on the 'O' can indicate how many squares away from the edge the castling partner is located.

Another novelty is the use of an 'ii' prefix to Pawn moves, indicating a move that can only be made when the Pawn is on the rank just in front of the one where it starts on. This can be used for the often encountered rule on 10-rank boards that Pawns can be pushed 1, 2 or 3 squares from 2nd rank, but still 1 or 2 squares from 3rd rank, as in Wildebeest Chess. The 'i' modifier has also been given a meaning for its appearence in continuation legs (where its meaning as move for virgin pieces only makes no sense): it can be used on sliding continuation legs to indicate the move has to be equally long (in basic steps) as the preceding sliding leg ('i' standing for 'iso'). This allows for instance definition of slider rifle captures.

Non-rectangular boards, or boards with holes

XBoard 4.9 supports inaccessible squares, displayed in black. These can be used as fillers to fit non-rectangular boards in the display of XBoard. E.g. the Omega-Chess board with the dangling Wizard squares can be realized by defining a 12x12 board, and making all edge squares except the corners inaccessible. In FENs these inaccessible squares are indicated by asterisks '*'.

In Edit Position mode you can create inaccessible squares by dragging empty squares off board, but you can also fill them again by moving pieces or empty squares to them. Clearing the board leaves the inaccessible squares as they are.

Command-line options to redefine game rules

A new option -fen can define an alternative starting position (from which the board size will be deduced). This could already been done by specifying a position file through -lpf, but the -fen option can do it directly from the command line, without the need for a separate file.

A new option -men can redefine moves of the pieces, like the VariantMen tag does in a PGN file. Its value can be a semicolon-separated list of piece ID : Betza move description pairs, like Q:KGH;B:mBcaibB. Both the -men and -fen options are volatile, and apply only as long as the New Variant dialog is not used to select a variant.

Foreign game formats

XBoard's game parser should now understand traditional Shogi notation, as in .kif files. It would understand those both in UTF8 and Shift-JIS encoding. This allows you to directly paste Shogi games into XBoard. XBoard will always save games in PGN format, though.

Fixed bugs

BACK TO TOP


 [FSF logo] “Our mission is to preserve, protect and promote the freedom to use, study, copy, modify, and redistribute computer software, and to defend the rights of Free Software users.”

The Free Software Foundation is the principal organizational sponsor of the GNU Operating System. Support GNU and the FSF by buying manuals and gear, joining the FSF as an associate member, or making a donation, either directly to the FSF or via Flattr.